- What's Included
Control any light in your home from two different switches. By installing the Leviton Security & Automation UPB Auxiliary Switch, you can turn a UPB 600-Watt Non-Dimming Switch (sold separately) or a UPB 600-Watt Dimmer (sold separately) into a true three-way unit to control it remotely from another room in your home. This Leviton Security & Automation Auxiliary Switch can control a lighting or appliance load up to 600 watts using Universal Powerline Bus technology (UPB). UPB technology uses your existing wiring, so you don't need to run wires in order to take advantage of its properties. This Auxiliary Switch uses standard Decora-style mechanics and a standard Decora-style wall plate (sold separately).
The Leviton Security & Automation Auxiliary Switch uses Universal Powerline Bus technology for superior performance and reliability. Similar to the standard X10 protocol, Universal Powerline Bus technology uses your existing power wires, so no rewiring is necessary in order to use this switch. But UPB benefits include its higher reliability, since its signal strength is stronger than X10, with increased electrical noise resistance. UPB products are NOT X10 compatible.
UPB technology allows enough individually addressable devices to control even large residential environments, usually without the need for phase coupling and without affecting or being affected by adjacent home environments. This wall switch controller mounts in a standard wall electrical box. Please note that the Leviton Security & Automation UPB Auxiliary Switch does require the use of the white neutral wire, where most standard switches have no connection for the neutral.
In 2012, HAI was acquired by Leviton, with the transitional name, “HAI by Leviton” applied. Mid 2013, “Leviton Security & Automation” was formalized.
The previous HAI part number for this product was 37A00-1.
Product No.: HL371-W (Formerly HAI Part # 37A00-1) UPC: 872257001938 Dimensions: 4.1" x 1.75" x 1.45" Weight: 0.25 lb. Mounting: Standard J box Operating Temperature: -40° F to 104° F Compliance: UL, CE, and Energy Star approved
- 4 wire nuts
- Mounting hardware