- What's Included
Add dimming capabilities to a light in your house with the Leviton Security & Automation UPB CFL/LED Dimmer Switch. This UPB (Universal Powerline Bus) Dimmer Switch is used for controlling and dimming LED and CFL lights as well as incandescent or halogen lighting loads up to 600 watts. UPB technology uses your existing wiring, so you don't need to run wires in order to take advantage of its properties.
The Leviton Security & Automation UPB CFL/LED Dimmer uses Universal Powerline Bus technology for superior performance and reliability. Similar to the standard X10 protocol, Universal Powerline Bus technology uses your existing power wires, so no rewiring is necessary in order to use this switch. But UPB benefits include its higher reliability, since its signal strength is stronger than X10, with increased electrical noise resistance. UPB products are NOT X10 compatible.
This UPB Dimmer Switch works as a stand-alone dimmer or may be used with room controllers, house controllers, or automation controllers. In addition, it may be used as a three-way controller when you add a UPB auxiliary switch (sold separately).
UPB technology allows enough individually addressable devices to control even large residential environments, usually without the need for phase coupling and without affecting or being affected by adjacent home environments. This wall switch controller mounts in a standard wall electrical box. It uses standard Decora-style mechanics and a standard Decora-style wall plate (sold separately). Please note that the UPB Dimmer does require the use of the white neutral wire, where most standard switches have no connection for the neutral.
In 2012, HAI was acquired by Leviton, with the transitional name, “HAI by Leviton” applied. Mid 2013, “Leviton Security & Automation” was formalized.
The previous HAI part number for this product was 35A00-1CFL.
Product No.: HL352-W (Formerly HAI Part # 35A00-1CFL) UPC: 872257005875 Dimensions: 4.1" x 1.75" x 1.45" Weight: 0.25 lb. Power Maximum: 600 W Connections: 18 GA Mounting: Standard J box Input Power: 120 +/- 12V AC Input Frequency: 60 +/- 3 Hz Operating Temperature: -40° F to 104° F Compliance: UL, CE, and Energy Star approved
- Dimmer Switch
- 4 wire nuts
- Mounting hardware