Leviton ODS10-IDW Commercial Grade Wall Mounted Occupancy Sensor, White
Share Share Share Share Share
Rewards: 49 Points

Leviton ODS10-IDW Commercial Grade Wall Mounted Occupancy Sensor, White

Automatically Turn Off The Lights When The Office Is Empty

Item #: 2520W

Product is unavailable

Special Price: $49.82

List Price: $118.99

Your Savings: $69.17

  • Details
  • Specs
  • Reviews
  • What's Included

  • Push-button Manual Override Control
    For manual control, the wall sensor features a convenient push-button switch. If the lights are OFF, pressing the button will turn lights ON and keep them ON for as long as the room is occupied. The lights will be turned OFF once the room is vacant, after the delayed-OFF time expires. If the lights are ON, pressing the button will turn lights OFF and keep them OFF even if the room is occupied.

    Field of View
    The wall sensor provides a 180
  • Specifications

    Manufacturer Product No.:ODS10-IDW
    Line Voltage:120/277 VAC
    Operational Frequencies:60Hz
    Wire Designation:Line-Black, Load -Blue, Ground-Green
    Load Rating:Fluorescent: 1200VA (10A) @ 120V; 2700VA (10A) @ 277V
    Incandescent:: 800W (6.67A) @ 120V
    Motor: 1/4 HP (5.8A) @ 120V
    Minimum Load Required:None
    Compatible Loads:Electronics Ballast, Magnetic Ballast, Electronics Low-Voltage Transformers, Magnetic Low-Voltage Transformers, Incandescent Lamps, Fans
    Operating Temperature Range:32 F to 122 F
    Relative Humidity:20% to 90% non-condensing
    Agency Approval:UL Listed, CSA Certified, Complies w/ California Title 24 Energy Code, Complies with FCC Regulations

  • Reviews 1 - 10 of 48

    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    Review of 2520W Review by JOERG
    Review of 2520W

    Works with fluorescent lights. Makes an audible clicking noise. Adjustable shades to limit field of view is a very useful feature. Range, background light and delay time can be adjusted separately from each other. The time delay control looks like a potentiometer, but has only four settings: 0.5, 10, 20 and 30 minutes (according to the manual), which are difficult to locate. Continuous adjustment would be desirable. The device also lacks an always-on override, e.g., by long-pressing the button and LED color change.

    Posted on 3/4/2012

    Review of 2520W Review by RICHARD
    Review of 2520W

    Installed for two weeks now, they work great.

    Posted on 3/1/2012

    Review of 2520W Review by DAROLD
    Review of 2520W

    Works perfect! Works just as I had planned and intended it to. Adds convenience and should save substantially on usage of electricity.

    Posted on 11/14/2011

    Review of 2520W Review by Russ
    Review of 2520W

    I have gone through two of these powering about 8 CFL and now LED bulbs. The first one failed by staying on beyond the timeout, and wouldn't even respond to manually turning off, resulting in lights being on all night with no way to turn them off without removing completely needless to say a major PITA. The second one failed by failing to turn off when set to the standard 20 minute timeout works on 30 seconds, but stays on forever on 20 minutes. Returning both under warranty so we'll see if we get better results, but batting 0 for now.

    Posted on 8/21/2011

    Review of 2520W Review by Barry
    Review of 2520W

    This is a great switch that works with compact fluorescent lights CFL's which can be very difficult to find in, especially in your local home stores.I use this switch for a task light in my kitchen, and it works great when making a quick meal or late night snack. I only have one small complaint in that the ambiant sensor settings are not as sensitive as I would like, because even with the sensor at it's lowest possible level it still allows the motion sensor to activate the lights even with an good amount of sunlight in the room. I would prefer it to only activate in little or no available light.This technology has come far, but still has a ways to go before it is perfected.

    Posted on 8/5/2011

    Review of 2520W Review by JOHNIE
    Review of 2520W

    Great product. Easy to install and operate.

    Posted on 6/30/2011

    Review of 2520W Review by BARBARA
    Review of 2520W

    Fast delivery, easy to install and works perfectly.

    Posted on 2/11/2011

    Review of 2520W Review by FRANK
    Review of 2520W

    The commercial grade allows for use with all florescent ballasts without any flickering. Always buy the commercial ones when using with florescent lighting. Worth every penny. I have seem these things work for 20+ years in a commercial setting

    Posted on 12/3/2010

    Review of 2520W Review by JACK
    Review of 2520W

    easy to install and works great

    Posted on 10/13/2010

    Review of 2520W Review by THOMAS
    Review of 2520W

    Excellent product - solved our problems with lights being left on in our church restrooms.

    Posted on 8/16/2010

    Leave a Review

    You're reviewing: Leviton ODS10-IDW Commercial Grade Wall Mounted Occupancy Sensor, White

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

  • One Leviton Commercial Grade Wall Mounted Occupancy Sensor - White
  • Mounting Screws
place your order by 3pm PT for same day shipping

Please wait...