Leviton HCS10-1SW 10-Amp Relay Wall Switch, White
Share Share Share Share Share
Rewards: 98 Points

Leviton HCS10-1SW 10-Amp Relay Wall Switch, White

Sophisticated Scene Lighting from Leviton!

Item #: 4295

Product is unavailable

Special Price: $49.85

List Price: $68.99

Your Savings: $19.14

  • Details
  • Specs
  • Reviews
  • What's Included

  • The relay switching means the X10 receiver circuitry is somewhat isolated from the load and is relatively unaffected by the type of load being switched (provided it does not exceed rated capacity). Features include ALL LIGHTS ON and ALL UNITS OFF command response and a green LED light that indicates the switch is on.

    NOTE: Because this switch responds to the ALL LIGHTS ON command, care should be taken when used to switch non-lamp loads. If you don't want your appliance to respond to this command, use an X10 Appliance Module or an X10 Wall Receptacle.

    This wall switch is compatible with Decora® Home Control (DHC) Scene-Capable Receivers, the next generation of powerline home lighting control from Leviton. Designed to work with other Leviton powerline lighting control products, this new system allows you to customize up to 64 whole-house lighting scenes that reflect your favorite moods or activities. Furthermore, the extended-data commands that these switches use make them compatible with a number of home automation controllers, including the Stargate, TimeCommander and HomeVision. The scene feature is not accessible with regular X10 transmitters.

    This switch includes a super sensitive receiver circuitry. In testing, we found this switch to be more sensitive than normal wall receiver modules. A new improvement for this model is a quieter relay. Earlier models have used a much louder relay that in some installations have disturbed the homeowners or users.

    The Leviton Relay Switch is ready for three or four-way circuits. A 3-way circuit requires one Leviton Relay Switch and one 2365-series slave switch. A 4-way circuit would require a total of two 2 slave switches. Simply add additional slave switches for 5, 6 or more way circuits. For single pole applications, just cap off the yellow traveler wire. Please note that you must use the Leviton 2365-series switches below, existing 3 or 4 way mechanical switches will damage the dimmer.

    Quality built in Leviton's own factory. Optional ivory conversion paddles included. Protected with a two-year warranty. Switches are UL-, CSA- and NOM-approved for use in the U.S., Canada and Mexico.

    This switch requires a neutral wire connection.

  • Specifications

    Manufacturer:Leviton
    Manufacturer Product No.:HCS10-1SW
    Rating:10 amps at 120V (1200 watts), 1/4 HP motors
    Compatibility:X10 compatible.
    Compatible with Decora® Home Control (DHC) scene-capable receivers.
    UL-, CSA- and NOM-approved for use in the U.S., Canada and Mexico.
    Requirements:Neutral wire connection
    Warranty:2 years


  • Reviews 1 - 10 of 16

    Page:
    1. 1
    2. 2
    Review of 4295 Review by Thorgrim
    Review of 4295
    Rating

    Works as specified but note that this device is ONLY a receiver. When you use the switch locally, it will not transmit a signal to other devices.

    This prevents me from being able to look at a Leviton 4-position wall switch in another part of the house and tell if the lights are on by the status LED's.

    Posted on 3/13/2013

    Review of 4295 Review by ROBERT
    Review of 4295
    Rating

    Installation and set-up went exactly as specified in the instructions. Seamlessly integrated with existing X-10 devices and is more quiet than expected. Great product.

    Posted on 6/21/2012

    Review of 4295 Review by CONRAD
    Review of 4295
    Rating

    1. This product was advertised as X10 compatible but the instructions were very poor - never once referencing X10 directly, but only some cryptic references to 'all lights on/off' cmd.

    2. The switch worked manually after being hooked up, but pushing the little program button produced no results. No matter how I depressed and held it, the LED would not flash.

    3. After trying to push the program button for some time, I heard an arc inside the switch after which it would not even work manually any more.

    I have used x10 for many years and I remember when it used to be reliable and easy. Now the new devices are quirky pieces of crap!
    I wonder if Smarthome will give me a new switch. I am electrically quite savvy and made no mistakes; this switch was defective.

    Posted on 4/11/2012

    Review of 4295 Review by DEBBIE
    Review of 4295
    Rating

    easy to install and program

    Posted on 3/31/2012

    Review of 4295 Review by TIM
    Review of 4295
    Rating

    This unit was working, but did not have the factory cut leads that are normally found with these devices, and was missing wire nuts. Although the unit works, it was apparently an open box or returned unit which should have been communicated to the buyer rather than selling it as a factory new unit.

    Posted on 2/23/2012

    Review of 4295 Review by STPHANE
    Review of 4295
    Rating

    Reliable quality product.

    Posted on 7/28/2011

    Review of 4295 Review by MIKE
    Review of 4295
    Rating

    Excellent Customer service - solved my issue quickly and replaced this item..

    Posted on 6/26/2011

    Review of 4295 Review by CHRIS
    Review of 4295
    Rating

    The product performed as expected and the customer was pleased. Since the addresses are programed into the switch by sending the signal from a transmitter, you can have problems prgramming it if there are signal problems in the area where it is being installed. This switch must have a nuetral to function properly which means it will not work as a replacement for wall switches in existing switch boxes where a nuetral is not present.

    Posted on 11/8/2010

    Review of 4295 Review by JEFF
    Review of 4295
    Rating

    Now have a switch that can correctly drive CFLs. Easy to install and is controlled by an X10 timer.

    Posted on 10/29/2010

    Review of 4295 Review by MIKE
    Review of 4295
    Rating

    FAST SHIPMENT: GOOD COMMUNICATION

    Posted on 7/29/2010

    Leave a Review

    You're reviewing: Leviton HCS10-1SW 10-Amp Relay Wall Switch, White

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

  • Leviton 10-Amp Relay Wall Switch HCS10-1SW
  • Ivory conversion paddle
  • Warranty
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart