Leviton HCM10-1SW Enhanced X10 Dimmer Switch 1000w (White/Ivory)
Share Share Share Share Share
Rewards: 128 Points

Leviton HCM10-1SW Enhanced X10 Dimmer Switch 1000w (White/Ivory)

1000 Watt Load Control with Enhanced X10 Capability and True Rocker Action!

Item #: 2203WI

Product is unavailable

Special Price: $64.97

List Price: $71.99

Your Savings: $7.02

  • Details
  • Specs
  • Reviews
  • What's Included

  • No complex programming steps are required to set it up for basic operation. Simply use a pen to press the set button on the side of the switch, and then send a signal from a controller to dictate its unit code. Scene capability is provided by using Leviton Wall-Mounted Scene Controllers. This capability will allow multiple enhanced X10 switches to immediately go to different programmed dim levels in response to a single X10 extended code command. This eliminates the time delays associated with sending out one signal after another to individually set multiple X10 switches to different levels.

    The Leviton Enhanced Dimmer Switch is ready for three or four-way circuits. A 3-way circuit requires one Leviton Enhanced Dimmer Switch and one slave switch. A 4-way circuit would require a total of two 2 slave switches. Simply add additional slave switches for 5, 6 or more way circuits. For single pole applications, just cap off the yellow traveler wire. Please note that you must use the slave switches below, existing 3 or 4 way mechanical switches or slaves from other X10 switches will damage the dimmer.

    Rated for incandescent and transformer-based loads up to 1000 watts. Uses a neutral wire at the switch for transformer-based lighting. Neutral wire is optional when used with incandescent lighting. Intellisense circuitry enhances sensitivity and reliability of X10 signal reception.

    Comes with an interchangeable white/ivory paddle switch cover. almond, black, white, ivory or grey paddle & trim replacement kits are available (sold separately). Slaves switches come in white, ivory and almond. Use the black or grey trim kits to change the color of any of the slave switches. Trim plate is not included.

  • Specifications

    Manufacturer:Leviton
    Manufacturer Product No.:HCM10-1SW
    Rating:For incandescent and transformer-based loads up to 1000W
    Compatibility:X10 receiver
    3 or 4-way circuits


  • Reviews 1 - 10 of 12

    Page:
    1. 1
    2. 2
    Review of 2203wi Review by JEFF
    Review of 2203wi
    Rating

    Nice product - works well. But would rather have the previous version (discontinued) at about 1/2 the price

    Posted on 1/18/2013

    Review of 2203wi Review by THOMAS
    Review of 2203wi
    Rating

    Works great!

    Posted on 11/8/2012

    Review of 2203wi Review by HENRY
    Review of 2203wi
    Rating

    it made buzzing noise after being installed and now i have to have the manufacturer repair it. I would not buy this again

    Posted on 4/14/2012

    Review of 2203wi Review by Tim
    Review of 2203wi
    Rating

    I bought this plus the 2365I for 3-way control. It has a very high-quality feel to it, unlike other X-10 dimmers I have owned and broke after just a couple years. However it is noisy very high-pitched buzz; I can barely hear it but it annoys my kids sometimes. Also, with X-10 operation, it apparently only works with house code A. It didn't work with house code B that I was using, which took an hour of debug, before I figured that out.

    Posted on 12/18/2011

    Review of 2203wi Review by STPHANE
    Review of 2203wi
    Rating

    Reliable quality product.

    Posted on 7/28/2011

    Review of 2203wi Review by PAUL
    Review of 2203wi
    Rating

    Excellent and reliable product! I use many of these in my home and shop and I'm very happy with their performance.

    Posted on 8/18/2010

    Review of 2203wi Review by KENNETH
    Review of 2203wi
    Rating

    Quite noisy when switched on and off

    Posted on 6/21/2008

    Review of 2203wi Review by JEFFREY
    Review of 2203wi
    Rating

    This is not a full range dimmer. It only allows about half intensity dimming.

    Posted on 3/6/2008

    Review of 2203wi Review by MARTIN
    Review of 2203wi
    Rating

    Very nice, you press on the top to turn ON and the bottom to turn off. The switches these replaced had you press on the bottom to turn ON and OFF. They are keepers.

    Posted on 1/15/2008

    Review of 2203wi Review by SAADIA
    Review of 2203wi
    Rating

    The unit works on manual but only works remotely when my x-10 controller is plugged into the computer and i give the command from the computer software. It does not work on the scheduled event list which I programed into the x-10 controller (which controls many other x-10 events).

    Posted on 11/18/2007

    Leave a Review

    You're reviewing: Leviton HCM10-1SW Enhanced X10 Dimmer Switch 1000w (White/Ivory)

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

  • 1000W Leviton Enhanced X10 Dimmer Switch
  • Interchangeable white/ivory paddle switch cover
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart