- What's Included
The Leviton DZPA1-1LW is a Z-Wave enabled universal appliance module designed for use for most residential lighting and motor applications. A large range of load types are supported including LED, CFL, incandescent, halogen, magnetic low voltage, electronic low voltage and fluorescent lighting; as well as motor loads up to ½ horse power. The DZPA1-1LW is fully compatible with the Wink HUB as well as all of the other certified Z-Wave controllers.
Leviton Decora Z-Wave Control
Leviton's Decora Z-wave Control (DZC) components are designed to communicate with each other via Radio Frequency (RF) to provide remote control of your lighting and appliances. In-Z-Wave network, each device is to act as a router. These routers will re-transmit the RF signal from one device to another until the intended device is reached. This ensures that the signal is received by its intended device by routing the signal around obstacles and radio dead spots.
Leviton DZC Wink App Compatible Products
The Wink Hub works with a variety of automation devices from various brands to give you total home control from simple, easy-to-use app on your smartphone. Leviton offers 5 different Z-Wave lighting and automation devices that are compatible with the Wink Hub: Plug-In On/Off Module Plug-In Dimmer Module In-Wall On/Off Switch In-Wall Dimmer Switch In-Wall Receptacle
Wink App Compatible vs. Wink App Ready
Products that are Wink App Compatible must be connected through a Wink HUB. The Wink HUB allows these products to connect with the Wink App (available for iOS and Android) and interact with other Wink App Compatible or Wink App Ready products – see below. They use communications like Z-Wave, Zigbee and ClearConnect to improve battery life and extend the range of smart products around your home. The Wink HUB allows them to speak the same language, so you can easily control them – and customize their interactions – all from the Wink App. Click on the icon to the left for additional Wink App Compatible products. Products that are Wink App Ready have Wink technology built in and can connect directly to the Wink App (available for iOS and Android) without the assistance of the Wink HUB. Once connected, the Wink App allows you to interact with other Wink App Ready or Wink App Compatible products. Wink App Ready devices use Wi-Fi to connect to your wireless router and communicate with the Wink App - so you can easily control them and and customize their interactions. Click on the icon to the left for additional Wink App Ready products.
Brand Leviton Manufacturer Part # DZPA1-1LW UPC 078477692073 Maximum Load Incandescent: 1800W
Electrical Rating 120VAC, 60Hz Compatibility Z-Wave (Z-Wave Network Wide Inclusion, Beaming and Security) Neutral Required Yes
- • Owner's Manual
• 1x - Leviton DZPA1 DZC Z-Wave 15A Plug-In Appliance Module
• 1x - Owner's Manual