IRLinc Transmitter - Insteon to IR Converter
Share Share Share Share Share
Rewards: 29 Points

Insteon Remote Control IR Transmitter and Insteon to IR Signal Converter

Control Your Home Theater / IR Equipment From Any Insteon Controller
  • Conveniently learns IR directly from your existing remotes
  • Macro support: Control several devices from a single button press
  • Compatible with most IR-controlled devices
  • Sleek black finish blends with your A/V equipment
  • Includes dual stick-on IR emitters for easy set up
  • Award-winning Insteon technology provides superior performance and reliability
  • This product is not compatible with the Insteon Hub

Item# 2411T IN STOCK - SHIPS TODAY

$29.95
List Price: $89.99
Your Savings: $60.04
REWARDS:29 points
Frequently Bought Together:
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • IRLinc - Insteon IR Transmitter allows you to turn any KeypadLinc or Mini Remote into an IR remote that will integrate Insteon controlled lights and devices with your whole-home music system, home theater, or even your IR-controllable blinds or drapes. Using an Insteon controller such as KeypadLinc, you can set up buttons for play, stop, volume up, volume down, previous track, next track, change source and power to control your whole-home music system. Or, while hosting a dinner party, set your dinner lighting scene and turn on music from your dining-room using Mini Remote, all without excusing yourself from the table. By running one of IRLinc's emitters to an IR-controllable automated drape controller you can use Mini Remote to close the drapes and remove the glare while watching a movie, open and close a home theater curtain or schedule your bedroom blinds to open in the morning. Using your Insteon network to control IR equipment around the house opens up a new world of home control possibilities.

    IR Macro Support
    IRLinc Transmitter supports IR macros, allowing several IR commands to be programmed to a single Insteon controller button. Have your TV and tuner turn on, select the cable box as your source and turn on your lights from the touch of a button. Need a delay between turning on the TV and selecting the cable box as a source? Grab a remote from another room or unused remote and program a "dummy" IR code between the "TV Power" and TV source selection commands. IR macros are also great for programming several-digit television channels to an Insteon controller button.

    Independent On/Off Buttons
    IRLinc Transmitter features the ability to program independent IR commands or macros to each the On and the Off on any Insteon controller. Make your Mini Remote even more intuitive by programming the "Volume Up" IR command to the 1st On button and "Volume Down" IR command to the 1st Off button. Also, take advantage of macros by programming your two favorite television channels to the 2nd On/Off button pair. For example, you can program your Mini Remote's 2nd On button to change to the Discovery channel, while the 2nd Off button changes the channel to ESPN.

    Note: The IRLinc is currently unsupported in HouseLinc software.

    Non-Volatile Memory
    All IRLinc settings are stored in non-volatile memory and are not lost during power failures.
  • Specifications

    General
    Brand: Insteon
    Manufacturer Product No.: 2411T IRLinc Transmitter (Insteon to IR Converter)
    UPC: 718122389513
    Patent No.: U.S. Patent No. 7,345,998, International patents pending
    Color: Black
    Operation
    Status LED: 1 blue LED (on the side)
    Talk Back LED: 1 red LED (per emitter head)
    Operation Modes: Insteon
    IR Codes: Standard CE IR codes
    Setup Memory: Non-volatile EEPROM
    Insteon Features
    Insteon Addresses: 1 hard-coded out of 16,777,216 possible
    Insteon Links: 128 IR codes total
    Insteon Powerline Frequency: 131.65 KHz
    Insteon Minimum Transmit Level: 3.2 Vpp into 5 Ohms
    Insteon Minimum Receive Level: 10 mV
    Insteon Messages Repeated: Yes
    Mechanical
    Operating Conditions: Indoors, 32° F to 104° F, up to 85% relative humidity
    Storage Conditions: Indoors, 32° F to 104° F, up to 85% relative humidity
    Dimensions: 4.0" H x 2.5" W x 1.5" D
    Weight: 9.6 ounces
    Electrical
    Supply Voltage: 120 Volts AC +/- 10%, 60 Hz, single phase
    Surge Protection: MOV rated for 150 Volts
    Power Plug: 3-Pin grounded
    Pass Through Outlet: 3-Pin grounded
    Maximum Pass-Through Load: 15 Amps
    Power Consumption: 1.71 Watts
    Certification: Safety tested for use in USA and Canada (ETL # 3017581)
    IR
    IR Frequency Range: 20kHz - 70kHz
    IR Jack Output: 18mA peak (2 emitters or 1 blaster)
    IR Jack: 1/8" mini plug
    IR Learning Range: Up to 4"
    # of IR Codes Supported: 128 total
    Pause Between IR: 0.5 seconds


  • Reviews 1 - 10 of 43

    Page:
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    Skip this one Review by Robl
    Skip this one
    Rating

    The other reviews are accurate - it takes a ton of trial and error and reprogramming to get this to sort of work. With ISY, you have to create scenes to control it, and you have to delete the device each time you reprogram it. Also, ISY limits you to just 2 signals. That seems horribly limited in 2016 - this thing should be able to store hundreds, or at least the 8-9 sub codes that insteon addresses allow. I tried to control a TV, a receiver, and an air cleaner. Only the receiver worked. The air cleaner needed a different set of IR emitters and the Vizio TV didn't work with either. I've spent over 12 hours of frustration on this. Time to look at the Z-wave modules instead.

    Posted on 11/9/2016

    Worked great for a year and then melted Review by Larry
    Worked great for a year and then melted
    Rating

    I had two of these to control my ductless air conditioners. Programming them was not that difficult and they did the job of starting and stopping the AC units on a schedule based on outside temperature. Yesterday one stopped working and when I looked into it today the unit was to hot to hold and the back had melted a little. My other unit is still Okay and not warm at all. We have had quick power disruptions in the last few days so I will chalk it up to that and buy another. I am also getting surge protectors,

    Posted on 6/14/2016

    Close .... Review by Jim
    Close ....
    Rating

    This device shows real promise, but the documentation makes things ... challenging. I have yet to figure out how to rprogram a macro into ti (more than one IR command) although the manual and the reviews above clearly say it supports it I can not find details on how. I've gotten it to work with my ISY, but have yet to figure out how to distinquish an 'off' from an 'on' there .... so a bit frustrated but I'm hoping Kelly or Mike (or anyone) can shed light on the macros issue for me

    Posted on 5/1/2016

    Review of 2411t Review by Starmanj
    Review of 2411t
    Rating

    Disappointed. I spent two full days trying to get it to work a FLIRC IR PC receiver. Every trick and combination. In addition, it is VERY difficult to program even using the ISY. It literally takes 20-30 minutes for the ISY to program it. Then if one button doesn't work, you have to delete the whole device and start again. Great luck with other insteon devices, but skip this one.

    Posted on 6/28/2014

    Review of 2411t Review by Juan
    Review of 2411t
    Rating

    I am very disappointed on the fact that you can not use this with the app that comes. this would be the best asset because it would let me control all kind or ir devices...... lots of wasted potential.

    Posted on 5/27/2014

    Review of 2411t Review by Juan Pablo Jimenez
    Review of 2411t
    Rating

    I am very disappointed on the fact that you can not use this with the app that comes. this would be the best asset because it would let me control all kind or ir devices...... lots of wasted potential.

    Posted on 5/27/2014

    Review of 2411t Review by Bruno
    Review of 2411t
    Rating

    Terrible device. Cant link with anything. Not like the rest of insteon devices. This is really a waste of money an time. I am really frustrated with piece of c...

    Posted on 12/14/2013

    Review of 2411t Review by Bruno Q
    Review of 2411t
    Rating

    Terrible device. Cant link with anything. Not like the rest of insteon devices. This is really a waste of money an time. I am really frustrated with piece of c...

    Posted on 12/14/2013

    Review of 2411t Review by Mike2545
    Review of 2411t
    Rating

    I bought one of these in hopes to control my LG mini-split heat pump, and I am completely happy. It learned the codes for any temperature you choose, you can schedule automatic set-back for when you are at work, and have a warm/cool house when you return.

    There is a bit of a trick to Programming it, on the My ISY 99i; click on the Link Management tab Add button to IR Linc Transmitter. You follow the instructions shown to add a button press. It shows up as a device in Main, then add it to a scene.In the Programs tab, you can schedule the scene 'on'.

    I ordered 4 more units for the rest of the LG mini-Split heat pump units. The IR Blaster by Global Cache work well at longer distances then the included stick on cubes

    Posted on 11/8/2013

    Review of 2411t Review by KELLY
    Review of 2411t
    Rating

    This review is for the second of these I have purchased. The device works well for controlling my receiver. I had to use manual programming because I use the hub and wanted to send a macro. It's linked to a KPL and works reliably with different sequences for on and off. The on macro string is 10 codes. I tried using it with Houselinc, but it does not appear to be supported. The only negatives for it are the difficulty in setting it up and lack of or limited support with the hub.

    Posted on 10/30/2013

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • IRLinc Transmitter - Insteon to IR Converter
    • Dual Stick-On IR Emitters (9 Feet)
    • Quick-Start Guide
place your order by 3pm PT for same day shipping

Please wait...