The Intermatic PF1103MT 120/240V Freeze Protection Control with Timer is designed to protect the Pool or Spa equipment and plumbing against freeze damage. It will turn on the pump and the heater when the outdoor temperature drops below the temperature set by the user adjustable thermostat. The timer provides both automation and protection for the equipment. The control can be installed outdoors and is designed to withstand extreme temperatures, high humidity, rain and chemicals typically found around pools and spas. The Freeze Protection Control with Timer requires an Enclosure. The Control is also available in 120/240V with an Enclosure or 240V without an Enclosure.
- Perfect solution for freezing weather Review by Malcolm
Perfect solution for freezing weather
Easy wiring instructions. Simple to test after installation. Worked perfectly last night. If you extend the sensing tube to the outside of the enclosure you will have to drill a hole in the bottom of the enclosure. I added a rubber grommet to mine to preclude any abrasion of the sensing tube. Just follow the instructions and you should be safe whenever below-freezing temps occur; all without paying any attention to the forecast and having to manually adjust your timer to prevent pump/piping damage. NOTE: If you are replacing one of the old original T100 series Intermatic timers this timer should be purchased with the included enclosure. This timer is considerably larger than the old T100 series and requires a separate, larger enclosure.
Posted on 12/28/2016
- Review of 42692 Review by BILL
Review of 42692
Could not get the product to work.
Posted on 11/29/2013
Leave a Review