Intermatic P1353ME 3-Circuit Pool or Spa Controller
Share Share Share Share Share
Rewards: 223 Points

Intermatic P1353ME 3-Circuit Pool or Spa Controller

The Fastest and Easiest Way to Upgrade Your Pool and/or Spa to a Digital Timer
  • Easiest way to upgrade to a digital timer/controller
  • 3 timed circuits
  • Up to 3 HP (pool, spa, lighting, and more)
  • LCD display
  • Freeze and heater protection

Item #: 25115

In Stock! SHIPS TODAY!

Special Price: $223.70

List Price: $228.00

Your Savings: $4.30

Frequently Bought Together:

Intermatic P1353ME 3-Circuit Pool or Spa Controller

Special Price: $223.70

List Price: $228.00

Your Savings: $4.30

+

Intermatic 178PA28A Pool/Spa Freeze or Air Temperature Sensor

Special Price: $52.82

List Price: $53.70

Your Savings: $0.88

Price For Both: $276.52

  • Details
  • Specs
  • Reviews
  • Designed as part of the I-Wave system and for aftermarket and retro-fit applications, the P1353ME can be installed into almost any Intermatic enclosure and has the ability to program up to three circuits. Choose between six preprogrammed modes of operation, which include single speed pump or 2-speed pump/cleaner pump combinations. In addition, programmed modes that include auxiliaries can control pumps up to 3 HP as well as underwater, landscape and/or fountain lighting. Countdown and Override features allow cycle interruptions when pool/spa service is required. All timing and protection associated with filter pump/cleaner pump combinations and two-speed pumps has already been integrated into the software.

    • 120 or 208-240 volt input voltage
    • Memory backup
    • Freeze protection
    • Heater protection (fireman switch)
    • LCD readout
    • Three ON/OFF events per day per circuit
    • Agency approval - CSA/C-US

    Modes of Operation
    Mode 1 - (Aux1, Aux2, Aux3)
    The time switch is 3-circuit switch with all three switches controlling auxiliary devices.
    Mode 2 - (Pump High, Pump Low, Aux3)
    The time switch is a 2-circuit switch with the 1st & 2nd switch controlling a two-speed pump. The 3rd switch is controlling any auxiliary device. All protection associated with a two speed pump is preprogrammed into this mode.
    Mode 3 - (Pump, Aux2, Cleaner Pump)
    The time switch is a 3-circuit switch with the 1st switch controlling a single speed pump, the 2nd switch controls any auxiliary device, and the 3rd switch operates a booster/cleaner pump. All timing & protection associated with a filter pump/cleaner pump combination is preprogrammed into this mode.
    Mode 4 - (Pump High, Pump Low, Cleaner Pump)
    The time switch is a 2-circuit switch with the 1st & 2nd switch controlling a 2-speed pump. The 3rd switch is controlling a booster/cleaner pump. All protection associated with a 2-speed pump and booster/cleaner pump combination is preprogrammed into this mode.
    Mode 5 - (Pump L1, Pump L2, Aux3)
    The time switch is a 2-circuit switch with the 1st & 2nd switch controlling a 240V pump, where both L1 & L2 are required to be disconnected when the pump is OFF. The 3rd switch is controlling any auxiliary device.
    Mode 6 - (Aux1, Aux2, Aux3)
    Identical to Mode 1, in which each of the three single pole circuits are defined generically and can control any load within each of its individual circuit ratings, with all three circuits acting independent of each other. However, with Mode 6, the fireman switch closes only when circuit 1 (the filter pump) is manually turned on - not when the clock turns it ON. This mode is useful when you have Circuit 1 connected to a circulation pump in the spa. When the spa is not in use, the clock circulates the water to filter it, but does not turn ON the heater. When the spa is in use, the heater is also turned ON by manually switching Circuit 1.

  • CONTACT RATINGS - EACH CIRCUIT, ALL MODES
    • 20A Resistive, 120/240 VAC., 50/60 Hz
    • 20A FLA@120 VAC, 96A LRA@120 VAC, 50/60 Hz
    • 17A FLA@240 VAC, 80A LRA@120 VAC, 50/60 Hz
    • 5 Amps Tungsten, 120/240 VAC, 50/60 Hz
    • 5 Amps Ballast, 120/240 VAC, 50/60 Hz
  • 3 Reviews

    Review of 25115 Review by THOMAS
    Review of 25115
    Rating

    Product was not want I needed as it is for daily only time settings, not weekly settings which I needed.

    Smarthome made it very easy to return the item and the refund was processed promptly. Would use Smarthome again for purchases when needed.

    Posted on 5/12/2013

    Review of 25115 Review by DENNIS
    Review of 25115
    Rating

    Digital is the way to go, like this product much better than the older version.

    Posted on 5/1/2013

    Review of 25115 Review by MATTHEW
    Review of 25115
    Rating

    Need a digital timer or equivalent for my new two speed pump. After researching, the Intermatic was the way to go and SmartHome had the best price anywhere. No hassle ordering, and super fast shipping I was able to install it the same week I ordered it. Its been 2 months and so far no problems or issues.

    Posted on 6/26/2012

    Leave a Review

    You're reviewing: Intermatic P1353ME 3-Circuit Pool or Spa Controller

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

Norton McAfee
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart