INSTEON Micro On/Off Module (Europe 869 MHz)
Share Share Share Share Share
Rewards: 64 Points

INSTEON 2443-422 Micro On/Off Module (Europe 869 MHz)

  • Add INSTEON on/off remote control without replacing your existing switch
  • Installs behind existing latching, single momentary or dual momentary switch
  • Requires a neutral wire in your junction box
  • Backwards compatible with X10 devices
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2443-422

In Stock! SHIPS TODAY!

$64.99
Frequently Bought Together:
  • Details
  • Specs
  • Reviews
  • Manuals
  • With the INSTEON Micro On/Off Module, you can convert any existing wall switch into an INSTEON-controllable smart switch. The Micro Module fits inside of your junction box and hides behind the switches that you already have. There is no need to replace the switch itself so you can keep your decor exactly as it stands.

    If you have lamps that don't support dimming (like most compact fluorescent and many LED bulbs), the Micro On/Off Module is the right choice.

    Add the INSTEON Hub and you can remotely monitor and control any Micro On/Off Module. You can create schedules to turn lights on or off so that your front door is always illuminated at night. You can even link Micro Modules to the INSTEON motion and open/close sensors to provide automatic lighting when someone enters a room or opens a door.

    International Compatibility Notice
    This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.
  • General
    Product Name: INSTEON Micro On / Off
    Brand/Manufacturer: INSTEON
    Manufacturer Product No.: EU 2443-422
    UPC: EU 813922012743
    Warranty: 2 years, limited
    INSTEON
    INSTEON: Controller and responder
    Maximum links/scenes: 400
    Load brightness levels: 32 locally (256 with software)
    Status LED: Green when load is on, red when load is off
    Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software)
    Blinks green or red during setup
    Blinks red to indicate traffic (must be enabled via software)
    LED brightness: Adjustable from off to 100% bright
    Local control: Yes
    Commands supported as controller: On Off
    Fast on Fast off
    Begin brighten End brighten
    Begin dim End dim
    Commands supported as responder: On Off
    Fast on Fast off
    Beep
    Software configurable: Yes
    RF range: 150 feet (50 meters) open air (may vary due to local interference)
    Phase detect beacon: Yes
    X10 support: Yes
    X10 addresses: Any 1 of 256 (unassigned by default)
    INSTEON device category: 0x02 Switched Lighting Control (all frequencies)
    INSTEON device subcategory: 2443-422 (869MHz) 0x31
    Mechanical
    Mounting: Behind switch or above light fixture in single-gang electrical box
    Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm2
    Sense 2 (purple): 24 AWG, 0.205mm2
    Max. cable size: 4mm, 12 AWG (2.72mm diameter)
    Min. cable size: 1.5mm2, 15 AWG
    Screw clamp connections: Line
    Load 1
    Load 1, second terminal
    Neutral
    Case color: White
    Set button: Yes
    Plastic: UV stabilized ABS+PC
    Beeper: Yes
    Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software)
    LED: 1 RGB
    Dimensions: 1.8"H x 1.8"W x 0.7"D (46.6mm H x 46.6mm W x 17.5mm D)
    Weight: 2.52 oz (71.5g)
    Operating environment: Indoors
    Operating temperature range: 32° to 104°F (0° to 40°C)
    Operating humidity range: 0-90% relative humidity
    Storage temperature range: -4° to 158°F (-20° to 70°C)
    Electrical
    Voltage: 100VAC to 240VAC
    Frequency: 50/60Hz auto-detected at power-up
    Max. load:

    16A - 240VAC (EU)
    3600W / 240VAC Resistive
    700W / 240VAC Inductive / Capacitive
    2000W / 240VAC Bulbs / Low voltage halogen

    Load types: Resistive
    Inductive / Capacitive
    Low voltage halogen
    Hardwired remote control: Yes, either latching or momentary switches supported
    Retain all settings without power: Yes, saved in non-volatile EEPROM
    Standby power consumption: <1W
    Certifications: EN 300 220-2, 301 489-3
    IEC 60669-2-1
    CE
  • 1 Review

    Review of 2443-422 Review by STEFAN
    Review of 2443-422
    Rating

    Very simple to get it work and super flexible.

    Posted on 3/23/2014

    Leave a Review

    You're reviewing: INSTEON 2443-422 Micro On/Off Module (Europe 869 MHz)

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

Norton McAfee
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart