- What's Included
Turn Any Wall Switch Into an Insteon Remote Controllable Dimmer
Micro Dimmer Module keeps your existing antique, toggle or decorative wall switches while adding the customizable, dimmable remote control functionality of a Dimmer Wall Switch.
Sometimes the couch is just too comfy and that wall switch is just too far away. Grab your smartphone and brighten and dim your switch to your heart's content.
Automatically turn your porch lights on at dusk. Wake up to a gentle pseudo-sunrise at 7AM. You can schedule individual wall switches or full groups of switches for particular hours and days of the week.
Ramp Rate & On Level
With a custom Ramp Rate, you get to set how quickly (or slowly) your lights brighten and dim - anywhere from instantly to 8 minutes. With On Level, you also get to specify how bright your lights are when you tap the paddle, from 1% to 100%.
With the Insteon Hub, scenes really take on a new level. Program one switch to turn off all of the downstairs lights. Configure another to turn on Movie Mode. And because you can schedule scenes, you can give your home that "lived in" look even when you're away.
Remote control with Insteon sensors.
Your Insteon Micro Modules can do so much more when given access to the family of Insteon sensors. With a few taps of the set button or a moment's time with your smartphone, you can configure sensors throughout your home to automatically turn on (or off) the lights based on a variety of different actions.
There are some rooms in your home that, no matter what time of day, you always end up turning on the lights: Pantries, closets, hallways, etc. With an Insteon Micro Module and an Open/Close Sensor (or Hidden Door Sensor), you will never need to turn the light on again. And better yet, you'll never need to remember to turn it off.
Motion & Occupancy
Do you play whack-a-mole all day, turning off the lights in rooms that your significant other - or children - have habitually left on? Turn every Insteon Micro Module into an occupancy-sensing switch with an Insteon Motion Sensor. And with Insteon, your Motion Sensor can control multiple Micro Modules simultaneously for large rooms or long hallways.
No one wants to think about the potential for a disaster, but if one were to happen, make your escape as safe as possible by automatically turning on lights to an escape path when Smoke Bridge detects smoke, fire or carbon monoxide from a linked First Alert OneLink detector.
It's no only cool, it's handy too. Whenever you open your garage door, turn on the overhead lights for easier entry and exit from your vehicle. And while you're at it, turn the outside sconces and walkway lights on, too for that extra bit of illuminated peace-of-mind when you come home late at night.
General Manufacturer Insteon Manufacturer Product No. 2442-222-4PK UPC 813922017144 Warranty 2 Years Insteon Features Insteon Controller and responder Maximum Links/Scenes 400 Load Brightness Levels 32 locally (256 with software) Status LED Green when load is on | Red when load is off
Blinks Red once when responder does not acknowledge | blinks Green once if all responders acknowledge (can be disabled via software)
Blinks Green or Red during setup
Blinks Red to indicate traffic (must be enabled via software)
LED Brightness Adjustable from off to 100% bright Local On-Level Adjustable from 32 fixed brightness levels or resume dim Local Ramp Rate Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 9 minutes with software) Local control Yes Commands Supported As Controller On | Off
Fast On | Fast Off
Begin Brighten | End Brighten
Begin Dim | End Dim
Commands Supported As Responder On | Off
Fast On | Fast Off
Begin Bright | End Brighten
Begin Dim | End Dim
Incremental Brighten | Incremental Dim
Software Configurable Yes Ramp Rates (full-On to full-Off) 0.125 to 9 seconds if programmed locally,
0.125 seconds to 8 minutes if programmed remotely via software
RF Range 150 ft. (depending on your home’s construction) Phase Detect Beacon Yes Insteon Device Category 0x01 dimmable lighting control (all frequencies) Insteon Device Subcategory 2442-222 (915MHz) | 0x35 Mechanical Mounting Behind switch or above light fixture in single-gang electrical box Wire Connections Sense 1 (yellow): 24 AWG, 0.205mm²
Sense 2 (purple): 24 AWG, 0.205mm²
Max. Cable Size 4mm², 12 AWG (2.72mm diameter) Min. Cable Size 1.5mm², 15 AWG Screw Clamp Connections Line
Case Color White Set Button Yes Plastic UV stabilized ABS+PC Beeper Yes Beep On Button Press Beeps when button is pressed or connected switch is tapped (must be enabled via software) LED 1 RGB Dimensions 1.8" x 1.8" x 0.7"(H x W x D) Weight 2.52 oz Operating Environment Indoors Operating Temperature Range 32° to 104°F (0° to 40°C) Operating Humidity Range 0-90% Relative Humidity Storage Temperature Range -4° to 158°F (-20° to 70°C) Electrical Voltage 100VAC to 240VAC Frequency 50/60Hz auto-detected at power-up Load Min. 5W, Max. 200W (at 240VAC)
Min. 5W, Max. 100W (at 140VAC)
Load Types Incandescent Hardwired Remote Control Yes, either latching or momentary switches supported Retain All Settings Without Power Yes, saved in non-volatile EEPROM Standby Power Consumption Safety Approved ETL, CE, C-Tick Certifications FCC, UL, IEC, EN FCC ID SBPMM01
- 4x - Insteon Micro Dimmer Module
- 4x - Quick Start Guide