- What's Included
Whether you're planning a new INSTEON installation or trying to locate communications problems in an existing one, the 8-function INSTEON Diagnostic Keypad will eliminate time-consuming guesswork. Plug it into an outlet to locate sources of noise and traffic, then link to an INSTEON responder to test its response time.
Functions of INSTEON Diagnostic Keypad include:
On/Off Toggle Sends on/off broadcast without confirmation to unit under test
Beep Sends a beep message to unit under test. This allows you to test devices you don't wish to toggle on and off and/or from locations where you can hear the responder's beep but cannot see the unit under test.
Report* This test allows you to monitor the quality of control signals from the device under test and is commonly used to commission an installation.
Traffic This test allows you to monitor in-band noise and INSTEON traffic on the powerline.
Distance Sends alternating fast-ons and fast-offs to unit under test and beeps upon positive message receipt.
Lock/Unlock* Prevents accidental changes being made to on-level, ramp rates, etc.
Relink* This is a convenient feature that quickly relinks a device under test when you have unlinked it and disabled its local setup. It is also handy to re-link to a device at a different level/state.
Unlink* Unlinks the unit under test
Note: Unit under test = last responder linked *This feature works only with INSTEON devices shipped after March 2012.
General Product Name: INSTEON Diagnostic Keypad Brand / Manufacturer: INSTEON Manufacturer Product No.: 2993-222 UPC: 813922012699 INSTEON INSTEON Powerline Mesh Repeater: Yes Setup Memory: Yes LED: White when a particular test mode is active LED Brightness: Constant Local Control: N/A, not a load controller Commands Supported as Controller: On, Off, Beep Commands Supported as Responder: N/A, not a load controller RF Range: 150ft Mechanical Mounting: Tabletop enclosure Wires: Standard lamp cord Screw Clamp Connections: N/A Case Color: White Set Button: 1 Plastic: UV stabilized polycarbonate Beeper: Yes Beep on Button Press: N/A LED: White Operating Environment: Indoors Operating Temperature Range: 32° to 104° F Operating Humidity Range: 0-85% relative humidity Electrical Voltage: 110VAC (+/- 10%) Frequency: 60Hz Load Type(s): N/A, not a load controller Maximum load: N/A, not a load controller Minimum Load: N/A, not a load controller User Replaceable Fuse: N/A Hardwired Remote Control: N/A Retains All Settings Without Power: Yes, saved in non-volatile EEPROM Standby power consumption: < 1 watt Safety Approval(s): ETL (Intertek Testing Services)
- Review of 2993-222 Review by MARK
Review of 2993-222
Does not work with older Insteon firmware
Posted on 5/19/2012
Leave a Review
- INSTEON Diagnostic Keypad
- Enclosure lid and base
- 2 enclosure screws
- 3 wire nuts
- Strain relief grommet
- Power cord