INSTEON-Compatible Elk M1 Gold Kit and ISY-994i with Dual-Band INSTEON Interface
Share Share Share Share Share
Rewards: 1199 Points

INSTEON-Compatible Elk M1 Gold Kit and ISY-994i with Dual-Band INSTEON Interface

Everything Needed to Integrate an Elk Security with an INSTEON Home Automation System via a Computer Interface
  • Security panel is expandable up to 208 on-board zones and 144 wireless zones
  • 500+ word/phrase vocabulary for voice announcements of alarms or zone status
  • Built-in telephone remote control makes any phone a keypad
  • Backlit, large-character flush-mount LCD keypad
  • Configure and Program INSTEON Devices
  • Remotely Accessible from any Standard Web Browser

Item #: 128301d

Expected in stock 09-26-2014

Special Price: $1,199.99

List Price: $1,293.12

Your Savings: $93.13

Frequently Bought Together:

INSTEON-Compatible Elk M1 Gold Kit and ISY-994i with Dual-Band INSTEON Interface

Special Price: $1,199.99

List Price: $1,293.12

Your Savings: $93.13

+

SwitchLinc Dimmer - INSTEON Remote Control Dimmer (Dual-Band), White

Special Price: $49.99

List Price: $59.99

Your Savings: $10.00

Price For Both: $1,249.98

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • This amazing package includes everything you need to create a home security system that will seamlessly integrate with an INSTEON automation system.

    The ELK M1 Gold system features a rock-solid security foundation with powerful automation functionality. Choose from a wide variety of Elk security system accessories to create 16 zones (expandable to 208). This Elk panel even has the capacity to handle up to 144 wireless zones, just add an M1 Cable to NX Wireless harness, ELK Wireless Receiver / Input Expander. The RP software can be downloaded for FREE from the Elk website.

    The Elk panel works with the included ISY-994i Controller, which is one of the most advanced INSTEON-compatible controllers on the market, supporting up to 256 devices and scenes and a maximum of 300 programs. You can set up timer events and custom event triggers, as well as monitor and control all the INSTEON-compatible devices in your home from any web-browser anywhere in the world. Also included is an INSTEON Dual-Band PLM Serial Interface which features built-in dual-band technology that sends and receives INSTEON signals via powerline and radio frequency (RF), so it doubles as an Access Point. This makes it ideal for new INSTEON installs if you have or plan to use an RF-only INSTEON-compatible devices like a remote, thermostat, motion sensor or contact sensor. Make your keypad truly flush mounted with the Flush-Mount Kit for M1 Keypad.

    eKeypad M1 - Native iPhone Apps for Use with M1 Panel
    eKeypad M1 is an application that provides mobile control of an ELK or NESS M1 system on your iPhone or iTouch device. From alarm functionality to lighting controls, eKeypad Pro allows you to view and control all aspects of your installation. This includes:
    • Alarm Functionality: Arming, Disarming and Status indicators
    • Keypad functionality: Function Keys, Function Key Status Lights
    • Elk internal task activation
    • Lighting control (UPB, X-10, OnQ-ALC, Centralite, INSTEON, Lutron Radio RA,
    • Z-wave and C-BUS)
    • Relay Output control
    • Thermostat control (RCS, HAI, and Aprilaire)
    • Zone status information and bypass control
    • Temperature sensors (probes, keypads and thermostats)

    Rich Security Features
    The M1 Gold offers ample security features. You'll gain peace of mind, knowing your smoke and motion detectors (both sold separately) are fully supported, along with a time/date-stamped 512-event history log. Partition your monitored area into eight separate areas with separate account numbers; program up to 99 user codes with assignable authority levels, so you'll be sure your home or office is being monitored wisely. Additional features include a two-way listen-in interface and multiple arm levels.

    Automate your Home
    More than just a security system, the M1 Gold can be used to create lifestyle-enhancing comfort and convenience through your home automation system. Interface your computers and peripheral devices into your M1 Gold and control your lighting, temperature and numerous other automation tasks. There's no need to chain rules together; the programming system allows almost any imaginable operation using easy-to-understand text-based references. Control your lighting, including dimming and scenes, using RS-232 serial or 2-way power line control ports. Read temperature sensors and communicate with thermostats. You can even turn on tasks, lights, and outputs via keypad or telephone remote. Additional features include sunset/sunrise calculation and activation as well as the ability to transmit and receive custom serial ASCII messages.

    Voice Announcement
    It's not necessary to rely on beeps and flashes with the M1 Gold. The voice announcement feature provides clear alerts and announcements, providing detailed information on alarms, zone descriptions, and status of areas. With a 500-plus-word/phrase vocabulary, you can link up to six words and phrases per announcements, and with an additional 10 custom-recordable words/phrases, you'll find this communications system to be extremely user-friendly. The integrated voice dialer also uses vocabulary or custom words and phrases.

    Keypad Functions / Options
    The built-in telephone remote control makes any phone a keypad. While the M1 Gold is expandable to support up to 16 LCD keypads, the system's included flush-mount keypad features a backlit, large-character LCD of 16 x 2 lines, which displays the system's diagnostics and settings. Between its menu navigation keys and its six programmable function keys, programming the display of time, date and temperature is made easy. On each keypad, one zone input and one output are programmable. Additional keypads and blue-backlit keypads are available to be purchased separately. And if you want the keypads to be truly flush-mounted in your walls, you will need the Flush Mount Kit. As supplied in the kit, the keypad sticks out of your wall about 1/2". A slim-line keypad is also available for use in spaces where you won't need the full functionality of the LCD keypad.

    Expandable
    Add up to twelve sets of 16 hardwired zones to your M1 Gold with the M1 16 Zone Input Expander. Looking to add wireless receivers? Use the M1 Cable to NX Wireless. Additional units that can be purchased separately include the M1 Databus Hub and the M1 Relay Board.

  • Additional information (Quick Start Guide, Owner's Manual, Specifications, etc.) is available for each component of this kit by clicking on the following links:
  • Reviews 1 - 10 of 19

    Page:
    1. 1
    2. 2
    Review of 128301d Review by Mike
    Review of 128301d
    Rating

    Great system. The ELK M1 Gold is very easy to set up. If you are a DIY'er, you need to do a LOT of reading/research. The forums are great, but it assumes that you understand all of the basics. It took me about a couple of months to get all the M1 wired and tested and ths ISY up and running with all of my Insteon devices registered. I was starting from scratch, although I had experience setting up an X10 network in another house, and I didn't work on it full time. I read everything I could on each area I was working on, and spent a lot of time labeling and documenting everything I did. The bulk of the ELK M1 time was setting up the M1XEP; setting up the DDNS, setting up a NON SECURE SMTP email account and getting it to work, getting the time server working all took research, trial/error and time. I then tested the system for a week before calling a security monitoring service. Then I tackled the Insteon/ISY technology. There are 2 distinct pieces of software you will need to program your ELK1 and your ISY. They both are free and totally different interfaces and behavior and require a learning curve. I have not linked my Insteon devices to my Elk yet, but that is coming. Now that I understand it, it should be straight forward. It was a good learning experience, but this is not a weekend project at least not for me. I did purchase the eKeypad app 99.00 from the Apple app store. It is expensive, but works very well. It will probably be my most used interface, so I wanted to make sure it was solid. The ELK and ISY have a lot of great featuresand possibilities. Now that it is working, I am excited to take to the next step.

    Posted on 2/19/2014

    Review of 128301d Review by SHANE
    Review of 128301d
    Rating

    This setup works great. SmartHome quickly answered my questions and ensured I had all the right components. Very satisfied!

    Posted on 1/26/2014

    Review of 128301d Review by Nathan
    Review of 128301d
    Rating

    Great system, however...this is NOT a DIY system unless you are an advanced DIY'er. It's a robust alarm system and I love that it can be managed over the network. But you will be doing some programming to get every wireless point and PIR singing together.

    Instructions are at the installer level and you should have some electrical experience reading a schematic to understand what you're up against.

    In the end....great system

    Posted on 8/25/2013

    Review of 128301d Review by Thomas
    Review of 128301d
    Rating

    I've had Insteon gear for a while, and an old PLM that I used to use to control the ~10 devices in the house. Recently decided to upgrade and get a home security system that I can control. I've never installed a security system so consider me a beginner.

    With that in mind I have been able to get all of the components in this kit installed and operational in short order. It does help if you have pre-wired security sensors in place thought, which was the case for me.

    The ISY took a little bit to get used to interface wise. I'm still learning a few things here and there. But again, i've been able to get 99% of the functionality I want out of this kit. I'm pleased for the most part.

    I do want to reiterate the comment listed previously. The ISY that comes in the kit does *not* natively work with the ELK M1G without the additional purchase of a software license or module that runs $99. It was easy to buy and install... Just be aware of that extra cost.

    Posted on 6/12/2013

    Review of 128301d Review by SCOTT
    Review of 128301d
    Rating

    The Elk M1G is a very capable security panel, though it does feel somewhat dated. For example, the XEP ethernet module supports sending email notifications but only to "non-secure" SMTP servers. Try to find a non-secure SMTP server in 2013. Not easy. Not as much experience yet with the ISY-994i. The ISY comes highly recommended, but I am a little disappointed on its reliance on Java in my browser which I traditionally have disabled and had to enable to configure this one product. As others have pointed out, this kit, which is aimed at being a combination M1/ISY kit, lacks the ISY module to integrate the ISY with the M1. It's another hundred bucks. Smarthome should really include that as part of the kit.

    Posted on 4/12/2013

    Review of 128301d Review by DON
    Review of 128301d
    Rating

    Was not quite sure where to give the stars since most of the problem was with smarthome. The system DOES require software to program as it would be a waste of time to try to do it through the keypad. the software (free) does NOT come with the unit is NOT supplied by smarthome and takes 2 days to get registered by elk just to download it. After some yelling.. smarthome did come through and let me use their account to download it. The manual does miss some key points as the install is not for beginners. Overall pretty pleased with the product. I may even buy another.
    I have not implemented all the features yet but still working on it!
    The web interface is weak which is why the isy994 was included. Too bad smart home does not sell wired sensors and a few included in the package. all in all expect to spend another K to deck it all out!

    Posted on 3/24/2013

    Review of 128301d Review by JIM
    Review of 128301d
    Rating

    Awesome product so far! ISY is really flexible and has options for even more control. Unfortunately I dont have the ELK setup yet, but will report back when I do. Overall the system is exactly what I was looking for to interface and monitor my house! I'll report back when fully setup.

    Posted on 2/8/2013

    Review of 128301d Review by insteon
    Review of 128301d
    Rating

    NOTE: The ISY does not come with the ELK module - you have to spend another $99 to get that integration. I know this seems odd, but it is true - you get some limited functionality with the kit, but not true integration. Maybe Smarthome will fix this in the future...

    Posted on 11/20/2012

    Review of 128301d Review by insteon user
    Review of 128301d
    Rating

    NOTE: The ISY does not come with the ELK module - you have to spend another $99 to get that integration. I know this seems odd, but it is true - you get some limited functionality with the kit, but not true integration. Maybe Smarthome will fix this in the future...

    Posted on 11/20/2012

    Review of 128301d Review by jvyd
    Review of 128301d
    Rating

    Everyone please be advised that this kit does not include the ISY-994i Elk Integration Module which will cost you another $99 from Universal Devices. Without this firmware the integration between the ISY-994i and Elk M1 is limited. I sincerely believe that this issue is misrepresented by Smarthome.

    Posted on 11/7/2012

    Leave a Review

    You're reviewing: INSTEON-Compatible Elk M1 Gold Kit and ISY-994i with Dual-Band INSTEON Interface

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart