Price For Both: $129.98
The sleek, discrete INSTEON Dimmer Module makes adding customizable, fully dimmable remote control to your lamps as easy as plug and play. It's home automation at its simplest and most convenient.
All INSTEON plug-in dimmers let you control both the brightness of the light and how quickly that light turns on or off (called the ramp-rate). You can dial in your settings so that a light slowly brightens over several seconds. Combine the adjustable brightness and light speed with lighting scenes and you can create highly customized and exquisite lighting control. Add a wireless Mini Remote and you can recall any scene you program with the touch of a single button. Want all the lights very dim for a relaxing evening? Or how about a scene where every light is instantly bright for when you hear a noise a night? It's all possible with INSTEON.
Add the INSTEON Hub and you can remotely monitor and control any Dimmer Module. You can create schedules to turn lights on or off so that your front door is always illuminated at night. You can even link plug-in dimmers to the INSTEON motion and open/close sensors to provide automatic lighting when someone enters a room or opens a door.
International Compatibility Notice
This INSTEON product is compatible with other 869 MHz European products. Products built for use in France, Germany and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European INSTEON products.
General Product Name: INSTEON Dimmer Module Brand/Manufacturer: INSTEON Manufacturer Product No.: UK 2632-442 UPC: UK 813922012637 INSTEON INSTEON Powerline Mesh Repeater Yes INSTEON RF Mesh Repeater Yes INSTEON Controller Yes INSTEON Responder Yes Maximum links/scenes: 400 Load brightness levels: 32 locally (256 with software) Status LED: Green when load is on, red when load is off Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software) Blinks green or red during setup Blinks red or green (depending upon state of load) to indicate traffic (must be enabled via software) Beep on button press Beeps red to indicate traffic (must be enabled via software) LED brightness: Adjustable from off to 100% bright Local on-level: Adjustable from 32 fixed brightness levels or resume dim Local ramp rate: Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software) Local control: Yes Commands supported as controller: On Off Fast on Fast off Begin brighten End brighten Begin dim End dim Commands supported as responder: On Off Fast on Fast off Begin brighten End brighten Begin dim End dim Incremental brighten Incremental dim Beep Software configurable: Yes Ramp Rates (full-ON to full-OFF): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software RF range: Up to 50 meters (150 feet) feet open air Phase detect beacon: Yes INSTEON device category: 0x01 dimmable lighting control INSTEON device subcategory: UK 0x11 Mechanical Mounting: AC outlet Wire connections: N/A Screw clamp connections N/A Case color: White Set button: 1 Plastic: UV stabilized polycarbonate Beeper: Yes LED: 1, RGB Dimensions: UK 10.4cm H x 5cm W x 3.4cm D Weight: 130g ± 10g Operating environment: Indoors Operating temperature range: 0° to 40°c (32° to 104°F) Operating humidity range: 0-90% relative humidity Storage temperature range: -20° to 70°C (-4° to 158°F) Electrical Voltage: 100VAC to 240VAC Electrical Frequency: 50/60 Hz auto-detected at power-up Min. load: 5W at 240VAC Max. load: 300W at 240VAC Load types: Lighting: Incandescent, dimmable CFL, dimmable halogen, select dimmable LED*
*compatible with LED bulbs that support leading edge TRIAC dimming
Hardwired remote control: N/A Retain all settings without power: Yes, saved in non-volatile EEPROM Standby power consumption: <0.75W Certifications: EN 300 220-2, 301 489-3
Leave a Review