Insteon DIN Rail Relay (Europe 869 MHz)
Share Share Share Share Share
Rewards: 105 Points

Insteon Remote Control DIN Rail Relay Switch - Europe

  • Add Insteon remote control directly to your wired lights
  • Mounts to a DIN rail (Top Hat Rail EN 50022 / Type O)
  • Sense wiring retains local control with latching, single-momentary and dual-momentary switches
  • This product is an Insteon Dual-Band device

Item# 2453-422 IN STOCK - SHIPS TODAY

REWARDS:105 points
Frequently Bought Together:
  • Details
  • Specs
  • Reviews
  • Manuals
  • Insteon DIN Rail On/Off is a module that clips right onto a DIN rail to add a wide variety of customizable, remotely controllable options to multiple lights or hard-wired loads. If your application already utilizes home-run wiring with a central DIN Rail-equipped electrical closet, adding DIN Rail modules make it easy to add Insteon control. The DIN Rail module includes sense wiring that can be configured to respond to latching, single-momentary and dual-momentary switches so that control from your existing wall switch can be preserved. If planning the electrical wiring for a new home or business, you can avoid adding too many wall switches in a single location. Wall switches ganged together can cause confusion and can quickly ruin the aesthetic of a room. Instead, a closet full of DIN Rail Modules can be controlled by a single Wireless Mini Remote; adjust the lights individually or grouped together in scenes all from a compact, wireless remote.

    Add the Insteon Hub and you can remotely monitor and control any DIN Rail On/Off Module. You can create schedules to turn lights on or off so that your front door is always illuminated at night. You can even link DIN Rail On/Off Modules to the Insteon motion and open/close sensors to provide automatic lighting when someone enters a room or opens a door.

    The DIN Rail On/Off Module clips directly onto a 35mm DIN rail and wires to load, power and neutral. Link it to an any Insteon controller for full remote control over the module and it's connected load. The DIN Rail On/Off Module is compatible with the Top Hat Rail EN 50022 (sometimes referred to as Type O). The DIN Rail On/Off Module will fit either variation of this style DIN rail with the flange being either 15 or 7.5 mm high off of the mounting surface.

    International Compatibility Notice
    This Insteon product is compatible with other 869 MHz European products. Products built for use in France, Germany and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Insteon products.
  • General
    Product Name: Insteon DIN Rail On / Off
    Brand/Manufacturer: Insteon
    Manufacturer Product No.: EU 2453-422
    UPC: EU 813922012835
    Warranty: 2 years, limited
    Insteon Powerline Mesh Repeater Yes
    Insteon RF Mesh Repeater Yes
    Insteon Controller Yes
    Insteon Responder Yes
    Maximum links/scenes: 400
    Load brightness levels: 32 locally (256 with software)
    Status LED: Green when load is on, red when load is off
    Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software)
    Blinks green or red during setup
    Blinks red or green (depending upon state of load) to indicate traffic (must be enabled via software)
    LED brightness: Adjustable from off to 100% brightness
    Local control: Yes
    Commands supported as controller: On Off
    Fast on Fast off
    Begin brighten End brighten
    Begin dim End dim
    Commands supported as responder: On Off
    Fast on Fast off
    Software configurable: Yes
    RF range: 150 (50m) feet open air
    Phase detect beacon: Yes
    Insteon device category: 0x02 Switched Lighting Control (all frequencies)
    Insteon device subcategory: US 0x2E
    EU 0x33
    AUS / NZ 0x34
    Mounting: 35mm (top hat) DIN rail
    Wire connections: N/A
    Max. cable size: 4mm², 12 AWG (2.72mm diameter)
    Min. cable size: 1.5mm², 15 AWG
    Screw DIN rail connections: Line
    Sense 1
    Sense 2
    Case color: White
    Set button: Yes
    Plastic: UV stabilized polycarbonate
    Beeper: Yes
    Beep on button press: Optional (off by default)
    LED: 1 RGB
    Dimensions: 3.14"H x 2.05"W x 2.48"D (80mm x 52mm x 63mm)
    Weight: 6.17 oz (175g)
    Operating environment: Indoors
    Operating temperature range: 32° to 104°F (0° to 40°C)
    Operating humidity range: 0-90% relative humidity
    Storage temperature range: -4° to 158°F (-20° to 70°C)
    Voltage: 100VAC to 240VAC
    RF Frequency: US 915 MHz
    EU 869 MHz
    AUS / NZ 921 Mhz
    Electrical Frequency: 50/60 Hz auto-detected at power-up
    Max. load: US 15A - 240VAC
    EU 16A - 240VAC
    AUS / NZ 10A - 240VAC
    3600W / 240VAC Resistive
    700W / 240VAC Inductive / Capacitive
    2000W / 240VAC Bulbs / Low Voltage Halogen
    Load types: Resistive
    Inductive / capacitive
    Low voltage halogen
    User replaceable fuse: US 16A, 5x20mm slow blow/burn glass fuse
    EU No user replaceable fuse
    AUS / NZ
    Hardwired remote control: Yes, either latching or momentary switches supported
    Retain all settings without power: Yes, saved in non-volatile EEPROM
    Standby power consumption: <1W
    Certifications: EN 300 220-2, 301 489-3
    IEC 60669-2-1
  • Write Your Own Review

    Only registered users can write reviews. Please, log in or register

place your order by 3pm PT for same day shipping

Please wait...