Price For Both: $210.58
Insteon DIN Rail Dimmer is a module that clips right onto a DIN rail to add a wide variety of customizable, remotely controllable dimmer options (brightness levels, ramp rates) to multiple lights. If your application already utilizes home-run wiring with a central DIN Rail-equipped electrical closet, adding DIN Rail modules make it easy to add Insteon control to hard-wired loads. The DIN Rail module includes sense wiring that can be configured to respond to latching, single-momentary and dual-momentary switches so that control from your existing wall switch can be preserved. If planning the electrical wiring for a new home or business, you can avoid adding too many wall switches in a single location. Wall switches ganged together can cause confusion and can quickly ruin the aesthetic of a room. Instead, a closet full of DIN Rail Modules can be controlled by a single Wireless Mini Remote; adjust the lights individually or grouped together in scenes all from a compact, wireless remote.
Add the Insteon Hub and you can remotely monitor and control any DIN Rail Dimmer. You can create schedules to turn lights on or off so that your front door is always illuminated at night. You can even link DIN Rail Dimmers to the Insteon motion and open/close sensors to provide automatic lighting when someone enters a room or opens a door.
The DIN Rail Dimmer clips directly onto a 35mm DIN rail and wires to load, power and neutral. Link it to an any Insteon controller for full remote control over the module and it's connected load. The DIN Rail Dimmer is compatible with the Top Hat Rail EN 50022 (sometimes referred to as Type O). The DIN Rail Dimmer will fit either variation of this style DIN rail with the flange being either 15 or 7.5 mm high off of the mounting surface.
International Compatibility Notice
This Insteon product is compatible with other 869 MHz European products. Products built for use in France, Germany and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Insteon products.
General Product Name: Insteon DIN Rail Dimmer Brand/Manufacturer: Insteon Manufacturer Product No.: EU 2452-422 UPC: EU 813922012804 Warranty: 2 years, limited Insteon Insteon Powerline Mesh Repeater Yes Insteon RF Mesh Repeater Yes Insteon Controller Yes Insteon Responder Yes Maximum links/scenes: 400 Load brightness levels: 32 locally (256 with software) Status LED: Green when load is on, red when load is off Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software) Blinks green or red during setup Blinks red or green (depending upon state of load) to indicate traffic (must be enabled via software) LED brightness: Adjustable from off to 100% bright Local on-level: Adjustable from 32 fixed brightness levels or resume dim Local ramp rate: Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software) Local control: Yes Commands supported as controller: On Off Fast on Fast off Begin brighten End brighten Begin dim End dim Commands supported as responder: On Off Fast on Fast off Begin brighten End brighten Begin dim End dim Incremental brighten Incremental dim Beep Software configurable: Yes Ramp Rates (full-ON to full-OFF): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software RF range: 150 feet open air Phase detect beacon: Yes Insteon device category: 0x01 dimmable lighting control Insteon device subcategory: US 0x34 EU 0x36 AUS / NZ 0x37 Mechanical Mounting: 35mm (top hat) DIN rail Wire connections: N/A Max. cable size: 4mm², 12 AWG (2.72mm diameter) Min. cable size: 1.5mm², 15 AWG Screw DIN rail connections: Line Neutral Load Sense 1 Sense 2 Case color: White Set button: Yes Plastic: UV stabilized polycarbonate Beeper: Yes Beep on button press: Optional (off by default) LED: 1 RGB Dimensions: 3.14"H x 2.05"W x 2.48"D Weight: 6.17 oz (175g) Operating environment: Indoors Operating temperature range: 32° to 104°F (0° to 40°C) Operating humidity range: 0-90% relative humidity Storage temperature range: -4° to 158°F (-20° to 70°C) Electrical Voltage: 100VAC to 240VAC RF Frequency: US 915 MHz EU 869 MHz AUS / NZ 921 Mhz Electrical Frequency: 50/60 Hz auto-detected at power-up Min. load: 5W at 240VAC
5W at 120VAC
Max. load: 300W at 240VAC
150W at 120VAC
Load types: Resistive
Low voltage halogen
User replaceable fuse: US 16A, 5x20mm slow blow/burn glass fuse EU 2A, 5x20mm slow blow/burn glass fuse AUS / NZ Hardwired remote control: Yes, either latching or momentary switches supported Retain all settings without power: Yes, saved in non-volatile EEPROM Standby power consumption: <1W Certifications: EN 300 220-2, 301 489-3