INSTEON DIN Rail Dimmer
Share Share Share Share Share
Rewards: 49 Points

INSTEON 2452-222 DIN Rail Dimmer

Manage Complex Wiring Circuits with DIN Rails and the INSTEON DIN Rail Dimmer
  • Simply clip onto 35mm DIN rail and wire like any other INSTEON dimmer
  • Dimmer with 32 brightness levels and 32 ramp rates
  • Optional sense wires allow for control via a connected, hard-wired switch
  • Compatible with latching, single momentary and dual momentary switches

Item #: 2452-222

In stock - Ships Today

$49.99
Frequently Bought Together:

Price For Both: $99.98

  • Details
  • Specs
  • Reviews
  • Manuals
  • When planning the electrical wiring for your home or business, avoid adding too many wall switches in a single location. Wall switches ganged together cause homeowner confusion and can quickly ruin the aesthetic of a room. Instead consider adding a single INSTEON keypad to control all the lighting. It's easy when combined with INSTEON DIN Rail products.

    For a professional finish to your DIN Rail installation, consider using an Indoor/Outdoor DIN Rail Enclosure with Pre-Installed DIN Rails(s). Optionally, individual DIN Rails and Enclosures are available separately.

    Use of DIN rails is common overseas and in US commercial/industrial buildings. Because of their ease of installation, DIN rails are becoming more popular in the US. DIN rail products provide integrators and builders a more custom and organized way to handle complicated wiring circuits.

    The DIN Rail Dimmer clips directly onto a 35mm DIN rail and wires to load, power and neutral. Link it to an INSTEON keypad or any other INSTEON device for full remote control over the module and it's connected load. Specifically, DIN rail Dimmer is compatible with the "Top hat rail EN 50022" (sometimes referred to as a Type O or Type Ω) The DIN Rail Dimmer will fit either variation of this style DIN rail (either 15 or 7.5 mm "high" off the mounting surface).

    What's a DIN Rail?
    It is simply a metal rail on which compatible products (circuit breakers, switches, etc.) can be snapped on. The DIN rail can simply be mounted to any flat surface (or even across studs). Please follow all applicable building and electrical codes whenever installing electrical products.
    Top hat DIN rail Cross section With module snapped on

    Please note that the DIN Rail Dimmer is not compatible with C section or G section Din rails.

    Optional Sense Wire Trigger
    The DIN Rail Dimmer features sense inputs for special applications where a local "dumb" switch might be necessary in addition to remote INSTEON control. Sense inputs are compatible with latching, single momentary and dual momentary wall switches. Connect to any style wall switch to match any type of designer theme (antique, push-button, metal, etc.)

    Local Control and INSTEON Setup
    The DIN Rail Dimmer has a small paddle that operates exactly the same as the best-selling SwitchLinc paddles. So, you can turn the connected load on, off or control its brightness by pressing and holding the paddle. Furthermore, a setup button is provided for setting up other properties as well as for linking and un-linking. Finally a dual-color (green and red) LED displays the on (green) or off (red) status of the connected load.

  • General
    Product Name: INSTEON DIN Rail Dimmer
    Brand/Manufacturer: INSTEON
    Manufacturer Product No.: 2452-222
    UPC: 813922012798
    Warranty: 2 years, limited
    INSTEON
    INSTEON: Controller and responder
    Maximum links/scenes: 400
    Load brightness levels: 32 locally (256 with software)
    Status LED: Green when load is on, red when load is off
    Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software)
    Blinks green or red during setup
    Blinks red or green (depending upon state of load) to indicate traffic (must be enabled via software)
    LED brightness: Adjustable from off to 100% bright
    Local on-level: Adjustable from 32 fixed brightness levels or resume dim
    Local ramp rate: Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software)
    Local control: Yes
    Commands supported as controller: On Off
    Fast on Fast off
    Begin brighten End brighten
    Begin dim End dim
    Commands supported as responder: On Off
    Fast on Fast off
    Begin brighten End brighten
    Begin dim End dim
    Incremental brighten Incremental dim
    Beep
    Software configurable: Yes
    Ramp Rates (full-ON to full-OFF): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software
    RF range: 150 feet open air
    Phase detect beacon: Yes
    INSTEON device category: 0x01 dimmable lighting control
    INSTEON device subcategory: 2452-222 (915MHz) 0x34
    Mechanical
    Mounting: 35mm (top hat) DIN rail
    Wire connections: N/A
    Max. cable size: 4mm², 12 AWG (2.72mm diameter)
    Min. cable size: 1.5mm², 15 AWG
    Screw DIN rail connections: Line
    Neutral
    Load
    Sense 1
    Sense 2
    Case color: White
    Set button: Yes
    Plastic: UV stabilized polycarbonate
    Beeper: Yes
    Beep on button press: Optional (off by default)
    LED: 1 RGB
    Dimensions: 3.14"H x 2.05"W x 2.48"D
    Weight: 6.17 oz (175g)
    Operating environment: Indoors
    Operating temperature range: 32° to 104°F (0° to 40°C)
    Operating humidity range: 0-90% relative humidity
    Storage temperature range: -4° to 158°F (-20° to 70°C)
    Electrical
    Voltage: 100VAC to 240VAC
    Frequency: 50/60Hz auto-detected at power-up
    Load: Min. 5W, Max 300W at 100-240VAC
    Load types: Resistive
    Low voltage halogen
    Incandescent
    User replaceable fuse: Yes
    Hardwired remote control: Yes, either latching or momentary switches supported
    Retain all settings without power: Yes, saved in non-volatile EEPROM
    Standby power consumption: <1W
    Safety approved: ETL
    Certifications: FCC
    FCC ID: SBPDR01
  • 7 Reviews

    Review of 2452-222 Review by JOSENIVALDO
    Review of 2452-222
    Rating

    The DIN form factor is very good to install on the power distribution panel or in the attic.

    Posted on 5/3/2014

    Review of 2452-222 Review by GUILLERMO
    Review of 2452-222
    Rating

    Great product to lead to homeautomation. We need am inwall LCD that controls everything that could go a step closer to vantage or lutron

    Posted on 7/17/2013

    Review of 2452-222 Review by GUILLERMO
    Review of 2452-222
    Rating

    I'm building the systems now with this module. Great product

    Posted on 5/16/2013

    Review of 2452-222 Review by DAVID
    Review of 2452-222
    Rating

    Works great. Be aware the sense inputs can not be used for anything other than a latching circuit.

    Posted on 5/5/2013

    Review of 2452-222 Review by JOHN
    Review of 2452-222
    Rating

    Exactly what I needed! We have a large vent hood over our range, the wife leaves the light in the hood on quite often. I installed one of these to control the lights, works great, existing switch is used to "trigger" this module and I can still shut the light off remotely.

    Posted on 1/20/2013

    Review of 2452-222 Review by George
    Review of 2452-222
    Rating

    Bought two of these to test converting an old Touchplate system to to an Insteon controlled system. This product is exactly whats needed and works as I expected from the description. I am able to use the Touchplate momentary switches to control the device--so no need to change switches. MyISY-99 recognized the devices immmediately and can program their options. CQC ISY-99 driver recognizes it and can control it as well. Remote control, programability, multiple, inexpensive switches for a load...a great step forward.

    Posted on 12/29/2012

    Review of 2452-222 Review by George Keepers
    Review of 2452-222
    Rating

    Bought two of these to test converting an old Touchplate system to to an Insteon controlled system. This product is exactly whats needed and works as I expected from the description. I am able to use the Touchplate momentary switches to control the device--so no need to change switches. MyISY-99 recognized the devices immmediately and can program their options. CQC ISY-99 driver recognizes it and can control it as well. Remote control, programability, multiple, inexpensive switches for a load...a great step forward.

    Posted on 12/29/2012

    Leave a Review

    You're reviewing: INSTEON 2452-222 DIN Rail Dimmer

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart