Price For Both: $129.98
With the Insteon Micro On/Off Module, you can convert any existing wall switch into an Insteon-controllable smart switch. The Micro Module fits inside of your junction box and hides behind the switches that you already have. There is no need to replace the switch itself so you can keep your decor exactly as it stands.
If you have lamps that don't support dimming (like most compact fluorescent and many LED bulbs), the Micro On/Off Module is the right choice.
Add the Insteon Hub and you can remotely monitor and control any Micro On/Off Module. You can create schedules to turn lights on or off so that your front door is always illuminated at night. You can even link Micro Modules to the Insteon motion and open/close sensors to provide automatic lighting when someone enters a room or opens a door.
International Compatibility Notice
This Insteon product is compatible with other 869 MHz European products. Products built for use in France, Germany and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Insteon products.
General Product Name: Insteon Micro On / Off Brand/Manufacturer: Insteon Manufacturer Product No.: EU 2443-422 UPC: EU 813922012743 Warranty: 2 years, limited Insteon Insteon: Controller and responder Maximum links/scenes: 400 Load brightness levels: 32 locally (256 with software) Status LED: Green when load is on, red when load is off Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software) Blinks green or red during setup Blinks red to indicate traffic (must be enabled via software) LED brightness: Adjustable from off to 100% bright Local control: Yes Commands supported as controller: On Off Fast on Fast off Begin brighten End brighten Begin dim End dim Commands supported as responder: On Off Fast on Fast off Beep Software configurable: Yes RF range: 150 feet (50 meters) open air (may vary due to local interference) Phase detect beacon: Yes Insteon device category: 0x02 Switched Lighting Control (all frequencies) Insteon device subcategory: 2443-422 (869MHz) 0x31 Mechanical Mounting: Behind switch or above light fixture in single-gang electrical box Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm2 Sense 2 (purple): 24 AWG, 0.205mm2 Max. cable size: 4mm, 12 AWG (2.72mm diameter) Min. cable size: 1.5mm2, 15 AWG Screw clamp connections: Line Load 1 Load 1, second terminal Neutral Case color: White Set button: Yes Plastic: UV stabilized ABS+PC Beeper: Yes Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software) LED: 1 RGB Dimensions: 1.8"H x 1.8"W x 0.7"D (46.6mm H x 46.6mm W x 17.5mm D) Weight: 2.52 oz (71.5g) Operating environment: Indoors Operating temperature range: 32° to 104°F (0° to 40°C) Operating humidity range: 0-90% relative humidity Storage temperature range: -4° to 158°F (-20° to 70°C) Electrical Voltage: 100VAC to 240VAC Frequency: 50/60Hz auto-detected at power-up Max. load:
16A - 240VAC (EU)
3600W / 240VAC Resistive
700W / 240VAC Inductive / Capacitive
2000W / 240VAC Bulbs / Low voltage halogen
Load types: Resistive
Inductive / Capacitive
Low voltage halogen
Hardwired remote control: Yes, either latching or momentary switches supported Retain all settings without power: Yes, saved in non-volatile EEPROM Standby power consumption: <1W Certifications: EN 300 220-2, 301 489-3
- Review of 2443-422 Review by STEFAN
Review of 2443-422
Very simple to get it work and super flexible.
Posted on 3/24/2014
Leave a Review