Price For Both: $129.98
The Micro Dimmer lets you control both the brightness of the light and how quickly that light turns on or off (called the ramp-rate). You can dial in your settings so that a light slowly brightens over several seconds. Combine the adjustable brightness and light speed with lighting scenes and you can create highly customized and exquisite lighting control. Add a wireless Mini Remote and you can recall any scene you program with the touch of a single button. Want all the lights very dim for a relaxing evening? Or how about a scene where every light is instantly bright for when you hear a noise a night? It's all possible with Insteon.
Add the Insteon Hub and you can remotely monitor and control any Micro Dimmer. You can create schedules to turn lights on or off so that your front door is always illuminated at night. You can even link Micro Modules to the Insteon motion and open/close sensors to provide automatic lighting when someone enters a room or opens a door.
International Compatibility Notice
This Insteon product is compatible with other 869 MHz European products. Products built for use in France, Germany and the United Kingdom all use 869 MHz. Products built for the USA and Australia / New Zealand use different RF frequencies that are incompatible with European Insteon products.
General Product Name: Insteon Micro Dimmer Brand/Manufacturer: Insteon Manufacturer Product No.: EU 2442-422 UPC: EU 813922012712 Warranty: 2 years, limited Insteon Insteon: Controller and responder Maximum links/scenes: 400 Load brightness levels: 32 locally (256 with software) Status LED: Green when load is on, red when load is off Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software) Blinks green or red during setup Blinks red to indicate traffic (must be enabled via software) LED brightness: Adjustable from off to 100% bright Local on-level: Adjustable from 32 fixed brightness levels or resume dim Local ramp rate: Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 9 minutes with software) Local control: Yes Commands supported as controller: On Off Fast on Fast off Begin brighten End brighten Begin dim End dim Commands supported as responder: On Off Fast on Fast off Begin brighten End brighten Begin dim End dim Incremental brighten Incremental dim Beep Software configurable: Yes Ramp Rates (full-ON to full-OFF): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software RF range: 150 feet open air (may vary due to local interference) Phase detect beacon: Yes Insteon device category: 0x01 dimmable lighting control (all frequencies) Insteon device subcategory: 2442-222 (915MHz) 0x35 2442-422 (869MHz) 0x38 2442-522 (921Mhz) 0x39 Mechanical Mounting: Behind switch or above light fixture in single-gang electrical box Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm Sense 2 (purple): 24 AWG, 0.205mm Max. cable size: 4mm, 12 AWG (2.72mm diameter) Min. cable size: 1.5mm, 15 AWG Screw clamp connections: Line Load Neutral 1 Neutral 2 Case color: White Set button: Yes Plastic: UV stabilized ABS+PC Beeper: Yes Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software) LED: 1 RGB Dimensions: 1.8"H x 1.8"W x 0.7"D Weight: 2.52 oz Operating environment: Indoors Operating temperature range: 32° to 104°F (0° to 40°C) Operating humidity range: 0-90% relative humidity Storage temperature range: -4° to 158°F (-20° to 70°C) Electrical Voltage: 100VAC to 240VAC Frequency: 50/60Hz auto-detected at power-up Min. load: 5W at 240VAC
5W at 120VAC
Max. load: 200W at 240VAC
100W at 140VAC
Load types: Incandescent Hardwired remote control: Yes, either latching or momentary switches supported Retain all settings without power: Yes, saved in non-volatile EEPROM Standby power consumption: <1W Certifications: EN 300 220-2, 301 489-3
• Quick Start Guide
• Owner's Manual