- What's Included
Control hardwired lights and appliances without a wall switch. Simply wire the In-Line On/Off Switch to your lighting or appliance fixture and link it to an Insteon controller for fast, reliable remote control. No need to pull additional wires for a wall switch!
The In-Line On/Off Switch works great in residential (120VAC) as well as commercial (277VAC) applications and offers a higher load switching capacity than the Insteon Micro Modules so you can control larger banks of lighting. In addition this In-Line On/Off Switch is dual-band, meaning it communicates simultaneously over both radio frequency (RF) and the powerline, increasing reliability while enhancing your Insteon network.
Add a Wireless Wall Switch Anywhere
A Mini Remote Switch can be wirelessly linked to the In-Line On/Off Switch and mounted on any wall you where you want control (mounting kit sold separately). The Mini Remote Switch looks like a standard wall switch but is powered by a USB-rechargeable battery and can go for over a year without recharging under daily use. You can add as many as you want, providing a wireless switch at different points in the room or across the house.
Using Insteon Hub (2245-222), you can control, program, and manage settings for In-Line On/Off Switch and any other Insteon devices in your network. You can even schedule timed events, receive alerts when devices are activated and more.
Insteon also offers a Micro On/Off Module that wires in behind your existing switches or fixtures. This allows you to keep your existing antique, toggle or decorative wall switches while adding the customizable Insteon remote control functionality.
All In-Line On/Off Switch settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the In-Line On/Off Switch will return to its last on/off state when power is restored.
General Manufacturer Insteon Manufacturer Product No. 2475SDB UPC 813922017205 Patent No. U.S. Patent No. 7,345,998. Protected under U.S. and foreign patents (see www.insteon.com) Warranty 2 Years Insteon Features Operation Modes Insteon LED Indicator Green when load is On
Red when load is Off
Multi-Way Circuit Support Yes, as a receiver and as a controller Setup Memory Non-volatile EEPROM Insteon ID 1 Maximum Scene Links 417 Scene Commands Supported as Responder On | Off Software Configurable Yes RF Range 150 ft.(depending on your home’s construction) Mechanical Mounting Mounts inside lighting ballast box in the ceiling or in the wall Wire's White - Neutral 18 gauge
Black - Hot 12 gauge
Red - Load 12 gauge
Copper - Earth ground 12 gauge
Beeper Yes Operating Conditions 32 to 104° F, up to 85% relative humidity Operating Environment Indoor Dimensions 2.77" x 1.75" x 1.47"(H x W x D) Weight 4.2 oz Storage Conditions 4-158°F (-20-70°C) Electrical Voltage 120VAC +/- 10%, Single phase
277VAC +/- 10%, One phase of a three phase system
Frequency 60Hz Load Types Wired-in incandescent lighting and inductive loads Load Types Wired-in incandescent lighting Maximum Load 20 Amps;1800 Watts (for incandescent loads) Standby Power Consumption <1W Certifications Safety tested for use in USA and Canada (UL-508-2010, CSA C22.2 #14-2010)
- 4x - Refurbished Insteon In-LineLinc Relay
- 4x - Quick Start Guide
- 16x - Wire Nuts