In-LineLinc Relay - INSTEON Remote Control In-Line On/Off Switch (Dual-Band)
Share Share Share Share Share
Rewards: 118 Points

In-LineLinc Relay - INSTEON 2475SDB Remote Control In-Line On/Off Switch (Dual-Band)

Control Up to 1800 Watts of Lighting Without a Wall Switch
  • Control hardwired lights and appliances without running wires for a wall switch
  • Fits inside a standard electrical box
  • Controls up to 20 Amps or 1800 Watts (incandescent) at 120 or 277VAC
  • Featuring dual-band INSTEON technology for the fastest and most reliable performance

Item #: 2475SDB

In Stock! SHIPS TODAY!

$59.99
Frequently Bought Together:
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Control hardwired lights and appliances without a wall switch. Simply wire the In-LineLinc to your lighting or appliance fixture and link it to an INSTEON controller for fast, reliable remote control. No need to pull additional wires for a wall switch!

    This latest member of the In-LineLinc family works great in residential (120VAC) as well as commercial (277VAC) applications and offers a higher load switching capacity so you can control larger banks of lighting. In addition this In-LineLinc Relay is dual-band, meaning it communicates simultaneously over both radio frequency (RF) and the powerline, increasing reliability while enhancing your INSTEON network.

    Software configurable
    Using INSTEON software such as HouseLinc, you can control, program and manage settings for In-LineLinc Relay and any other INSTEON devices in your network. You can even schedule timed events, receive email alerts when devices are activated and more.

    Add a Wireless Wall Switch Anywhere
    A RemoteLinc 2 Switch can be wirelessly linked to the In-LineLinc Relay and mounted on any wall you where you want control (mounting kit sold separately). The RemoteLinc 2 Switch looks like a standard decorator wall switch but is powered by a USB-rechargeable battery and can go for over a year without recharging under daily use. You can add as many as you want, providing a wireless switch at different points in the room or house.

    INSTEON also offers a Micro On/Off Module that wires in behind your existing switches or fixtures. This allows you to keep your existing antique, toggle or decorative wall switches while adding the customizable INSTEON remote control functionality.

    Non-Volatile Memory
    All In-LineLinc Relay settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the In-LineLinc Relay will return to its last on/off state when power is restored.
  • General
    Brand: INSTEON
    Manufacturer Product No.: 2475SDB, In-LineLinc Relay - INSTEON Remote Control In-Line On/Off Switch (Dual-Band)
    UPC: 813922011425
    Patent No.: U.S. Patent No. 7,345,998, International patents pending
    Operation
    Operation Modes: INSTEON
    LED Indicator: Off when load is on and vice versa
    Multi-Way Circuit Support: Yes, as a receiver and as a controller
    Setup Memory: Non-volatile EEPROM
    INSTEON Features
    INSTEON ID: 1
    Maximum Scene Links: 417
    Scene Commands Supported as Responder: On Off
    Software Configurable: Yes, Always
    RF Range: 150' Open air
    Mechanical
    Mounting: Mounts inside lighting ballast box in the ceiling or in the wall
    Wires:

    Colors:
    White - Neutral 18 gauge
    Black - Hot 12 Gauge
    Red - Load 12 Gauge
    Copper - Earth Ground 12 Gauge

    Beeper: Yes
    Operating Conditions: Indoors, 32 to 104° F, up to 85% relative humidity
    Dimensions: 2.77" H x 1.75" W x 1.47" D
    Weight: 4.2 ounces
    Electrical
    Voltage: 120VAC +/- 10%, Single phase
    277VAC +/- 10%, One phase of a three phase system
    Frequency: 60Hz
    Load Types: Wired-in incandescent lighting and inductive loads
    Maximum Load: 20 Amps;1800 Watts (for incandescent loads)
    Power Consumption: <1 Watt
    Certification: Safety tested for use in USA and Canada (UL-508-2010, CSA C22.2 #14-2010)


  • Reviews 1 - 10 of 59

    Page:
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    Review of 2475SDB Review by JOHN
    Review of 2475SDB
    Rating

    Item easy to install and set-up. The relay allows installation of wall sconces without exposed electrical wires and eliminated need to run wiring for a switch. Great product.

    Posted on 7/19/2014

    Review of 2475SDB Review by RICHARD
    Review of 2475SDB
    Rating

    These are great for remote locations where I can't install a switch box. For example I am using this one in a light fixture in my attic. I then control the light from a keypad link on the ground floor. Don't have to worry about leaving light on in the attic as I can turn it off from anywhere.

    Posted on 2/16/2014

    Review of 2475SDB Review by JAMES
    Review of 2475SDB
    Rating

    Works great, wish it was small enough to fit in the light fixture I used it on, but it did what I wanted it to do.

    Posted on 2/5/2014

    Review of 2475SDB Review by CHRISTOPHER
    Review of 2475SDB
    Rating

    I have an older in-linelinc, non dual-band but with sense wiring. I have no communication problems with any of my insteon stuff other than some noise coming through LED lights on the same circuit. I've found most communication issues were a result of a bad program or scene.

    Posted on 1/15/2014

    Review of 2475SDB Review by ARTHUR
    Review of 2475SDB
    Rating

    I'm having some of the same issues that I had with the x-10 stuff, inconsistancy

    Posted on 12/7/2013

    Review of 2475SDB Review by ERIC
    Review of 2475SDB
    Rating

    Solved my problem works great

    Posted on 12/4/2013

    Review of 2475SDB Review by JAMES
    Review of 2475SDB
    Rating

    I am using this in a sealed outdoor enclosure to control a heavy duty relay for my pond pumps. No problems with reliability and it works a lot faster than my old X-10 control. The status capability allows me to see which pump is on even when it is too dark to see the pond.Taking one star off since the housing has multiple protrusions which hinder placement in a tight box. Replacing pigtails with screw terminals would eliminate multiple wire nuts which also take up valuable space.

    Posted on 11/19/2013

    Review of 2475SDB Review by TIM
    Review of 2475SDB
    Rating

    Change LED to red/green such as In-LineLinc Dimmer. Love addition of 20A control and local on/off buttons. Lacking full x/10 control. It will only handle a primary address, not scenes in x/10. This deletion completely baffles me since it is just a software issue that is readily available. Here's the biggie; the brackets for mounting in gang box have now been deleted. This unit is so dangerous. I was told by support to just let it sit in gang position, but it can move with heat/cold or vibration and touch up against adjacent gang mounted items such as outlets or the side of the gang box if metal and short out or start a fire. There needs to be an immediate fix for this issue or recalled. INCLUDE removable brackets please.

    Posted on 10/2/2013

    Review of 2475SDB Review by MARY
    Review of 2475SDB
    Rating

    Works well..Wish the remote switch fit in the wall bracket and switchplate better.

    Posted on 9/19/2013

    Review of 2475SDB Review by JAY
    Review of 2475SDB
    Rating

    Worked perfectly.

    Posted on 8/4/2013

    Leave a Review

    You're reviewing: In-LineLinc Relay - INSTEON 2475SDB Remote Control In-Line On/Off Switch (Dual-Band)

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • Owner's Manual
      • In-LineLinc Relay - INSTEON Remote Control In-Line On/Off Switch (Dual-Band)
      • 4 Wire Nuts
      • Quick Start Guide
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart