In-LineLinc Dimmer - Insteon Remote Control In-Line Dimmer (Dual-Band)
Share Share Share Share Share
Rewards: 54 Points

Insteon Remote Control In-Line Dimmer Switch

Control Lighting Without Running Additional Wires for a Switch
  • Remotely control hardwired incandescent lights without running wires for a wall switch
  • Fits inside a standard electrical box
  • Controls up to 400 Watts at 100-277VAC and 50/60Hz
  • Insteon Hub Pro enables this device to work with HomeKit techonolgy
  • This product is an Insteon Dual-Band device


REWARDS:54 points
Frequently Bought Together:
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • This dimmer is designed to be installed within a junction box or in a ceiling fixture allowing you remote control over lights that may not have a direct connection to a wall switch. This allows you to pair the dimmer with any number of Insteon remote controllers.

    This dimmer controls incandescent bulbs. If you need to control a fluorescent light fixture or an appliance, try the In-LineLinc Relay.

    Insteon also offers a Micro Dimmer Module that wires in behind your existing switches or fixtures. This allows you to keep your existing antique, toggle or decorative wall switches while adding the customizable, dimmable Insteon remote control functionality.

    Note: As with all dimmers, the In-LineLinc may feel warm during operation. Rigorously tested and approved to UL-standards, the amount of heat generated falls well within approved limits and poses no threat to your home or the lifespan of the device.

    This dimmer can be used with dimmable LED bulbs to help you save even more energy. While performance may vary between manufacturers, we have found that Sylvania Ultra LED dimmable bulbs offer great performance with a wide and smooth dimming range. The Ultra LED series include the following types: Standard (A-Line), MR16, PAR16, PAR16 GUI10, PAR20, PAR30LN and PAR38.

    Easy To Install
    The Insteon In-LineLinc Dimmer is easy to install and set up. Its small size allows installation in a standard J-box or in a ceiling light fixture. Control each kitchen light individually or rows of can lights with a single Insteon In-LineLinc Dimmer. Learn more about Insteon here.

    Perfect for Locations without a Switch
    Whether you're planning to install recessed lighting or have already done so, you don't need to go through the hassle of running the wiring for a new wall switch. By installing an In-LineLinc in a fixture box, you'll be able to control the lights from any location in your home. Simply install the In-LineLinc in the fixture box, link it manually or via HouseLinc - Insteon Desktop Software, and you'll be able to turn lights on and off and dim them using any Insteon -compatible controller. For maximum personalized control, wire an In-LineLinc to each non-switched light for the ultimate in mood settings.

    Adjustable Ramp Rate
    Adjust the speed at which the controlled light turns on or off, also known as the ramp rate. For example, you may want the light in the stairwell to turn on instantly so you can see where you're walking. Alternatively, you may want the light in the master bathroom to ramp up in a soft, gentle fashion so you're not blinded in the middle of the night. The ramp rate is adjustable between 0.1 second and 9 seconds if programmed locally. The ramp rate can extend up to 8 minutes (for a simulated sunrise or sunset) if programmed using software such as HouseLinc. This is a great addition to your morning alarm, slowly turning the light on to help you wake up.

    Easy to Program
    Programming an In-LineLinc can be easily done a couple of different ways. The Tap method is best for your initial setup. Simply go into linking mode on any Insteon -compatible controller and then press the set button on the In-LineLinc for 3 seconds; the load and the status LED will flash. You are now linked and can control the In-LineLinc from the controller of your choice. Keep in mind that once installed in a fixture, the In-LineLinc will not be easily accessible, thus making new links and scene programming difficult. We recommend using software such as HouseLinc 2 - Insteon Desktop Software to manage the links of your In-LineLinc after it is installed. Remember, you will need to have the Insteon ID in order to program with software.

    Scene Lighting
    Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because the In-LineLinc Dimmer can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All member lights can ramp to your independently desired brightness levels at your chosen ramp rate(s). So one set of lights can dim slowly, while another set turns off instantly, all controlled with one command from one button. If you want to control multiple scenes from one controller, we suggest the Insteon KeypadLinc.

    In-LineLinc is dual band so it has the ability to communicate using both the electrical wires in the home (powerline) as well as using radio frequency (RF). This increases reliability not only for In-LineLinc but for all devices on an Insteon home control network (similar to the function of an Access Point).

    Non-Volatile Memory
    All In-LineLinc Dimmer settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the In-LineLinc Dimmer will return to its last brightness level when power is restored.
  • General
    Brand: Insteon
    Manufacturer product no.: 2475DA1, In-LineLinc Dimmer - Insteon Remote Control In-Line Dimmer Switch (Dual-Band)
    UPC: 813922012361
    FCC ID: SBP2475DA1
    Patent No.: U.S. Patent No. 7,345,998. Protected under U.S. and foreign patents (see
    On-levels: 32 locally, increments of 1% with software
    Ramp rates (full-on to full-off): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely
    Operation modes: Insteon
    LED indicator: Green when load is on and red when load is off
    Multi-way circuit support: Yes, as a receiver and as a controller
    Setup memory: Non-volatile EEPROM
    Insteon Features
    Insteon ID: 1
    Insteon : 400 responder groups and 1 controller group
    Maximum scene memberships: 400 (combined controller and responder)
    Scene commands supported as responder: On Off
    Fast-on Fast-off
    Brighten Dim
    Software configurable: Yes
    Ramp Rates (full-ON to full-OFF): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software
    RF Range: 100' open air
    Mounting: Mounts inside standard electrical box in the ceiling or in the wall

    White - Neutral 18 gauge
    Black - Hot 16 gauge
    Red - Load 16 gauge
    Copper - Earth ground 14 gauge

    Beeper: Yes
    Operating conditions: Indoors, 32-104°F, up to 90% relative humidity
    Dimensions: 2.75" H x 1.75" W x 1" D
    Weight: 2.5 oz
    Storage conditions: 4-158°F (-20-70°C)
    Voltage: 100-277VAC +/- 10%, Single phase
    Frequency: 50/60Hz auto-detected at power-up
    Load types: Wired-in incandescent lighting
    Maximum load: 400 Watts
    Retains all settings without power Yes, saved in non-volatile EEPROM
    Standby power consumption: <1 Watt
    Safety approved: ETL (Intertek Testing Services)
    Certification: FCC, IC Canada

  • Reviews 1 - 10 of 38

    1. 1
    2. 2
    3. 3
    4. 4
    Review of 2475DA1 Review by WILLIAM
    Review of 2475DA1

    It would be nice if these had screwholes so it could be mounted in a standard outlet box, but other than that it worked great

    Posted on 8/3/2014

    Review of 2475DA1 Review by PETER
    Review of 2475DA1

    I ordered this replacement for an older unit that failed in a power surge. I was pleasantly surprised how this one has better build quality, easier and more intuitive set buttons, and easier installation for me overall.

    Posted on 7/31/2014

    Review of 2475DA1 Review by LEON
    Review of 2475DA1

    Dimming function not compatible with some LED bulbs. Otherwise an excellent product.

    Posted on 5/8/2014

    Review of 2475DA1 Review by JOHN
    Review of 2475DA1

    Not reliable long-term.

    Posted on 2/17/2014

    Review of 2475DA1 Review by RICHARD
    Review of 2475DA1


    Posted on 1/15/2014

    Review of 2475DA1 Review by GARRICK
    Review of 2475DA1

    Took several hours before I could finally pair this device with the dimmer. A couple more hours to figure out how to turn on the lights to 100% brightness.

    Posted on 1/2/2014

    Review of 2475DA1 Review by John
    Review of 2475DA1

    As with almost every Insteon device I've owned, the long-term reliability of the 2475D is poor. This unit worked for two years then completely died. Completely unresponsive, NO factory reset, no lights, nothing. I've got a couple dozen Insteon device in my house and I'm getting very tired of replacing them every 2 to 3 years due to their poor design. I'm glad the electronics in my other devices don't just up and die like Insteon devices do. Can you imagine driving your car and all of the sudden the electronic just die and then having the auto manufacture say sorry two years are up, you're out of the warranty period? Completely unacceptable long-term performance!
    SmartHome get your act together!

    Posted on 12/28/2013

    Review of 2475DA1 Review by GREG
    Review of 2475DA1

    Have had installed for about 3 weeks using a 4-Scene mini remote. Must use incandescent bulbs for dimming feature. Not sure about LED's yet. Housing is a tight fit in a ceiling junction box. We're using units in each of two pendant lights flanking our bed using two 4-Scene mini remotes. Each remote can be programmed to operate each light independently. Great tech support on chat line also. Tight fit in the junction box is the only reason for not giving five stars.

    Posted on 12/21/2013

    Review of 2475DA1 Review by DAVID
    Review of 2475DA1

    Wiring and setup was easy, works great out of the box. Far superior to previous X-10 setup. Time will tell.

    Posted on 12/1/2013

    Review of 2475DA1 Review by Cliff
    Review of 2475DA1

    Great product. This product is especially useful if you want separate control over different lights from one power circuit. In my case, I did a kitchen remodel and wanted to have separate control over 6 new recessed kitchen lights on one circuit and the center island pendant, as well as over cabinet lighting. To hardwire separate wiring to each of these lights would be impractical and expensive, unless with new construction. In my case, all lights are on one circuit, then each branches off to an individual in-line dimmer to control it's respective lighting in my case, one for the pendant light, one for the 6 recessed lights, and one for under/over cabinet lights. Now each can be controlled separately and with scenes through a six or eight way control switch.

    Setting up these devices like I did was made much easier with the Insteon hub I am not too fond of the hub overall, but it does make the setup of the switches much easier and for that alone it is worth it.

    Keep in mind that if you do as I have done, the total load of all devices must not exceed the circuit maximum. Generally for lighting it won't be a big deal - especially if you use low wattage bulbs LED's and CFL's.

    Posted on 11/11/2013

    Leave a Review

    Only registered users can write reviews. Please, log in or register

  • Smarthome How-to Guides:

    Manufacture Information:
    •  Quick Start Guide
    •  Owner's Manual
  • •  1x - In-LineLinc Dimmer - Insteon Remote Control In-Line Dimmer (Dual-Band)
    •  1x - Quick-Start Guide
    •  4x - Wire Nuts
place your order by 3pm PT for same day shipping

Please wait...