Hopkins Manufacturing 60100VA nVISION Back-Up Sensor System
Share Share Share Share Share
Rewards: 42 Points

Hopkins Manufacturing 60100VA nVISION Back-Up Sensor System

Protect Vehicle From Accidents and Injury with Back-Up Alarm Sensor
  • Back-Up Sensor System for cars, trucks, SUV's, and RV's
  • Detects objects up to 5.5' away
  • Helps prevent accidents and injury
  • Audible warning alarm
  • Perfect for cars, trucks, and SUVs
  • Mounts behind license plate

Item #: 92747

In stock - Ships Today

Special Price: $42.78

List Price: $59.99

Your Savings: $17.21

Frequently Bought Together:

Hopkins Manufacturing 60100VA nVISION Back-Up Sensor System

Special Price: $42.78

List Price: $59.99

Your Savings: $17.21

+

Price For Both: $192.77

  • Details
  • Specs
  • Reviews
  • What's Included
  • The Hopkins Manufacturing 60100VA nVISION Back-Up Sensor System helps reduce blind spots and increases visibility by detecting objects behind your vehicle. Protect your vehicle from rear-end collisions, eliminate blind spots, and increase visibility. The mounting bracket with SmartZone® sensors easily mounts behind your license plate and detects objects up to 5.5 feet away with three alert zones. The sensor alerts you with an audible alarm and it increases in intensity as the object behind the vehicle becomes closer. The Back-Up Sensor System is perfect for cars, trucks, SUV's, and RV's.

    SmartZone Sensing:
    - Red Zone: 0' - 1.5' The audible alarm will sound a solid 'beep' tone (Beeeeep). This alerts the driver to STOP immediately.
    - Yellow Zone: 1.5' - 3.5' The audible alarm frequency will begin to increase in intensity (Beep..Beep..Beep..). This alerts the driver to PREPARE TO STOP.
    - Green Zone: 3.5° - 5.5° The audible alarm will begin to beep a slow tone (Beep.....Beep.....Beep.....). This alerts the driver that an object is behind the vehicle.


    • Dimensions: 13.875 (L) x 2 (W) x 6.5 (H) inches
    • Weight: 1.82 lb
    • 3-Year Warranty

  • 10 Reviews

    Review of 92747 Review by LENNOX
    Review of 92747
    Rating

    Instalation was a little more involved on my dodge minivan, but on my Hyundai it was a snap, work great and I am impress.

    Posted on 8/16/2014

    Review of 92747 Review by RipDog
    Review of 92747
    Rating

    It sort of works. In general, you have to be really close to an object, and going very slowly, before it starts to beep. And sometimes when you shift into reverse, it emits a long beep for no reason - nothing back there. So, it sort of works ...

    Posted on 5/18/2012

    Review of 92747 Review by gndicot
    Review of 92747
    Rating

    Works good if and object is directly back of it, but won't pick up and object along the side

    Posted on 4/20/2012

    Review of 92747 Review by Juan
    Review of 92747
    Rating

    Works Great! Should have read the review about the double snap on the connector. Called manufacturer and they sent me another one. Surprised that they did not mention about the double snap. Instructions do not mention that. Otherwise, love it.

    Posted on 4/19/2012

    Review of 92747 Review by JOSEPH
    Review of 92747
    Rating

    Great product. 30 minute install on an 05 Pontiac. Instructions need to be supplemented so buyers know that the connector has to be forcibly inserted and the first click on the connector is not full insertion. I have installed 3 of these so far and all have worked perfectly once the connector was properly inserted.

    Posted on 12/11/2011

    Review of 92747 Review by JOSEPH C.
    Review of 92747
    Rating

    Great product. 30 minute install on an 05 Pontiac. Instructions need to be supplemented so buyers know that the connector has to be forcibly inserted and the first click on the connector is not full insertion. I have installed 3 of these so far and all have worked perfectly once the connector was properly inserted.

    Posted on 12/11/2011

    Review of 92747 Review by Joe
    Review of 92747
    Rating

    Terrific product. Install on an 05 Pontiac was 30 minutes. Instructions should indicate that the in-line connector requires significant force to insert fully it has a double snapand I suspect some customers will end up thinking the unit is defective. Also installed one on a friend's 07 Ford pick-up. I suggest a cut-out for the wire on the top edge of the unit so it can be mounted upside down as I did for the Pontiac to access an existing hole under the license plate.

    Posted on 11/18/2011

    Review of 92747 Review by Al
    Review of 92747
    Rating

    I bought two of these for my cars. I put them both on this weekend, each taking about 1.5 to 2 hours of time.

    They work great. Much more sensitive and a broader sensing area than I thought they would have considering there were only two sensors.

    Most of the installation time was spent removing inside trim panels and routing the wires. The wire splices worked fine and the instructions are OK but short.
    The beeper wire could be a bit longer, I don't think it would reach the front seat. I put both of mine at the rear of the car, one on the rear shelf and the other car on the liftgate. You can hear the beeper just fine.

    I test fit one of these on my 2009 Ranger pickup in the step and tow bumper to see if it would work there too. It did, so I am ordering a third unit for that vehicle.

    Posted on 6/18/2011

    Review of 92747 Review by Al Lewis
    Review of 92747
    Rating

    I bought two of these for my cars. I put them both on this weekend, each taking about 1.5 to 2 hours of time.

    They work great. Much more sensitive and a broader sensing area than I thought they would have considering there were only two sensors.

    Most of the installation time was spent removing inside trim panels and routing the wires. The wire splices worked fine and the instructions are OK but short.
    The beeper wire could be a bit longer, I don't think it would reach the front seat. I put both of mine at the rear of the car, one on the rear shelf and the other car on the liftgate. You can hear the beeper just fine.

    I test fit one of these on my 2009 Ranger pickup in the step and tow bumper to see if it would work there too. It did, so I am ordering a third unit for that vehicle.

    Posted on 6/18/2011

    Review of 92747 Review by Mark
    Review of 92747
    Rating

    Do not purchase this. It does not work

    Posted on 6/3/2011

    Leave a Review

    You're reviewing: Hopkins Manufacturing 60100VA nVISION Back-Up Sensor System

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • Mounting Bracket with 2 Sensors - Left and Right
    • Audible Alarm
    • Installation Cables
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart