Franklin Sensors ProSensor 710 Professional Stud Finder
Share Share Share Share Share
Rewards: 49 Points

Franklin Sensors ProSensor 710 Professional Stud Finder

Easily Detect Wood, Metal and Other Hidden Objects Behind Walls
  • Advanced Precision-Sense Technology senses the wall in multiple locations simultaneously
  • Operates effectively even through difficult architectural construction features
  • One-step operation: Press button to turn on. LED lights instantly indicate the location of objects
  • Deep Scanning is always active (up to 1.5")
  • The only stud detector available that does not need to be slid across the wall to operate

Item #: 88101

Product is on backorder

Special Price: $49.95

List Price: $59.95

Your Savings: $10.00

Frequently Bought Together:

Franklin Sensors ProSensor 710 Professional Stud Finder

Special Price: $49.95

List Price: $59.95

Your Savings: $10.00


Smarthome SELECT Dual Laser Garage Parking System

Special Price: $19.99

List Price: $29.99

Your Savings: $10.00

Price For Both: $69.94

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The Franklin Sensors ProSensor 710 is a professional-grade stud detector that is accurate, faster, and less error prone than other stud finders on the market. Sensing the wall in thirteen locations simultaneously, the stud detector illuminates the display elements in front of a stud. It identifies the width of hidden objects immediately, and can identify the position of multiple objects simultaneously. It has a far greater sensor pad surface area than conventional stud detectors to accurately identify objects through many difficult architectural features. Finding studs behind thick walls, wall and ceiling textures, uneven plaster thickness, uneven paint, and difficult wallpaper causes other sensors to fail, but it is no problem for the ProSensor 710. This product requires two AA batteries for operation (included).

    Ability to Detect 2 Objects Simultaneously
    Studs in a typical home are 16 inches apart, however, there are many instances where standard 16 inch stud spacing doesn't happen. This occurs frequently around doors, near windows, at corners, or when extra support is needed, such as below a stairway. Around these structural features it can be difficult to determine what studs are behind sheetrock if you are using a conventional electronic stud finder. The ProSensor 710 makes it easy to determine what is behind the sheetrock, even if there are multiple objects of different sizes and widths. The LEDs on the ProSensor 710 illuminate in front of all hidden objects, making identification easy.

    Deep scanning
    Most homes are built with sheetrock that is between 3/8 inches thick and 5/8 inches thick, and most stud finders will operate with these standard sheetrock thicknesses. However more and more homes are being built with two layers of sheetrock in select rooms. The second layer of sheetrock may be used, for example, to keep a bedroom quieter, or to line the walls of a theatre room. The ProSensor 710 has the best performance of any stud finder through thick surfaces and it has the best deep scanning capabilities of any available stud finder.

  • Specifications
    Manufacturer Franklin Sensors
    Manufacturer Product No. ProSensor 710
    UPC 689466315684
    Deep Scan Depth 1.5" (may vary depending on material consistency, moisture, wall texture, paint, etc.)
    Power 2x - AA batteries (included)
    Dimensions 7.1" L x 3.0" W x 1.9" H (180mm x 75mm x 48mm)
    Weight 6 ounces
    Storage Temperature 0° F to 120° F (-18° C to 50° C)
    Operating Temperature 32° F to 110° F (0° C to 43° C)
    Storage Humidity 0% to 90% relative humidity (non-condensing)
    Operating Humidity 0% to 90% relative humidity (non-condensing)
    Certifications FCC
    Manufacturer Warranty 1 Year Limited

  • Reviews 1 - 10 of 20

    1. 1
    2. 2
    Review of 88101 Review by DONALD
    Review of 88101

    Only used it on locating a thin board. Three lights came on making it difficult to determine the actual board however locating a 2x4 should be simple.

    Posted on 2/26/2014

    Review of 88101 Review by STEVEN
    Review of 88101

    The best stud finder I have ever used. I have five and none compare.

    Posted on 10/13/2013

    Review of 88101 Review by agpb
    Review of 88101

    Hands down best stud finder I've ever owned. I actually tossed a couple of old Zircons because this one works so well.

    Posted on 9/27/2013

    Review of 88101 Review by JOYCE
    Review of 88101

    Love it

    Posted on 7/7/2013

    Review of 88101 Review by LES
    Review of 88101

    Best stud finder I ever owned.

    Posted on 6/19/2013

    Review of 88101 Review by Franklin
    Review of 88101

    After receiving my Franklin stud finder through a product evaluation program, I immediately tested it on known studs in a bathroom I've been renovating. It was able to pick up all the studs I looked for on the first try with no finagling. It even picked up the wood brace behind a drywall patch a couple of inches from a stud both registered simultaneously as well as a stud behind 1/2 Hardie board with vapor membrane stud was shown as larger than actual, but center was accurate...I did not expect it to register behind such a dense concrete board.

    This stud finder is very easy to use...I would even recommend it to my sister, mother, and grandmother. I love that it is constantly scanning/calibrating, so I can push the button before I get to the wall without throwing off the calibration. I can also lift off the wall and move without it shutting off. With my old stud finder, I would have to turn it on and auto calibrate between studs and sweep it over where I thought a stud should be. This was often an unreliable process that would yield a slightly different stud center on each successive pass. It would also error out if I lifted it from the wall. This is by far the best stud finder I've ever used...I no longer have to knock on the wall to determine a good place to calibrate the stud finder.

    For the first real test, I used this to detect studs behind walls to nail in baseboard. This was perfect for the task! I was able to sweep the detector quickly over the wall with one hand holding in place to temporarily mark the stud via the red lights while using my finish air nailer with the other hand to secure the baseboard to the wall. I will be hanging towel bars tonight, and I expect similar results.

    This is an awesome stud finder, but that doesn't mean it can't be better my engineer's mentality! Here are some suggestions I have for this stud finder: 1 allow this stud finder to detect electric behind a wall...I will still have to keep my old stud finder around for that maybe you could add a second row of lights for electric or change the existing LED color in location of electric; 2 this multi-sensor system seems to get tripped up by metal behind a wall ie: will not detect stud when drywall corner guard is in range...I tricked it by turning it on a diagonal, which worked; 3 stud finder could not detect floor joists from above to secure squeaking floors I tried to scan through medium pill carpet/pad/sheeting...maybe a deep scan mode could be added; 4 add feedback that this unit is in deed on...there is no feedback if there is no stud in initial reaction is to push the button harder thinking I hadn't completed the full button stroke.

    Bottom line: I think you have one of the best consumer stud finders on the market which I would recommend to anybody, but I think if you consider some of these suggestions you will have the absolute king of stud finders that no competition will be able to touch for performance and multi-taski

    Posted on 6/1/2013

    Review of 88101 Review by THOMAS
    Review of 88101

    Absolutely the most awesome stud finder I have ever used.

    Posted on 5/9/2013

    Review of 88101 Review by DAVID
    Review of 88101

    Although I haven't used this device in an actual project, I tested it on walls that caused problems with other stud finders, and the ProSensor worked perfectly and quickly. It doesn't need to be "calibrated" every time it is used, and it allows you to quickly and accurately mark the center of the stud without going back and forth over an area of the wall. A definite winner!

    Posted on 5/9/2013

    Review of 88101 Review by REJEAN
    Review of 88101


    Posted on 4/29/2013

    Review of 88101 Review by ROBERT
    Review of 88101

    It's not as accurate as I had hoped. Tried new batteries twice but that didn't help.

    Posted on 4/28/2013

    Leave a Review

    You're reviewing: Franklin Sensors ProSensor 710 Professional Stud Finder

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • 1x - Franklin Sensors ProSensor 710 Professional Stud Finder
    • 1x - Owner's Manual
    • 2x - AA batteries
place your order by 3pm PT for same day shipping

Please wait...


Item has been added to your cart

Item has been removed from your cart