|
fgcosta711
Starting Member
Brazil
5 Posts |
 Posted - 08/12/2012 : 5:37:56 PM
|
Hi there,
I am using the ApplianceLinc module connected to two type of fluorescent buls: The first one is an electronic bulb from Philips and the second one is a 32W tube bulb with external Osram reactor.
The ApplianceLinc is connected to a KeypadLinc and it is responding pretty well.
However, when the ApplianceLinc output is off, it keeps the bulb blinking with a very low bright at a frequency of about 1 second.
I have tried six different ApplianceLinc modules and all are reacting in the same way.
I also tried to disable Load Sensing and to swap the neutral and fase on both input and output of the modules, unsuccessful.
Have you guys faced this problem before?
|
Fernando Costa. |
|
Lamp blinking when ApplianceLinc is turned off
