Talk About the Latest in Home Automation/Home Electronics
Home Automation Forum

Smarthome Forum
Shop All INSTEON Products
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome
 All Forums
 General Discussion
 INSTEON
 IP Camera motion detection + script Insteon idea
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

emiliograveran
New Member

USA
27 Posts

Posted - 02/01/2013 :  08:44:58 AM  Show Profile  Reply with Quote
So here's my idea since the camera software I'm running on my Mac supports scripts.

I was thinking of doing a quick Automator script in OS X that would basically turn on certain lights if motion was detected by my IP Cameras at night.

For example, if my front IP camera detected motion in the middle of the night, it would then tell my 2412N to turn on my front lights for 5 minutes then turn them off.

I've seen the custom commands on both the Smarthome Wiki as well as in the web interface for the 2412N but was curious as to the actual web address that I would need to put into Automator so the computer will actually open the browser, turn the lights off then open a new page and turn the lights off after 5 minutes.

This is all in theory but I can't test it because I can't figure out the exact web address to put in for the automation process.

Anyone have any experience or idea that can lead me in the right direction?

Thanks!
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2014 SmartLabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07