Talk About the Latest in Home Automation/Home Electronics
Home Automation Forum
Smarthome Forum
Shop All INSTEON Products
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome
 All Forums
 General Discussion
 INSTEON
 SwitchLinc 2476D & LEDs		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

kvander51
Average Member

62 Posts
Posted - 10/08/2012 :  06:29:22 AM  Show Profile  Reply with Quote
Tried to search for this issue but had no luck, so here goes:

I am about to install a fixture with dimmable LEDs and would like to know if the older SwitchLinc 2476D is compatible. If not, is there a SwitchLinc that will work with dimmable LEDs?

Thanks!

BLH
Advanced Member

3759 Posts
Posted - 10/08/2012 :  08:12:46 AM  Show Profile  Reply with Quote
I have done some testing with a 2467D Hardware 2.2 and some dimmable LED Bulbs.
They worked fine on the SwitchLinc Dimmer.
Philips EnudraLED 12.5 watt. Both hardware versions.
EcoSmart 9 Watt.
Sylvania Ultra LED 8 Watt.

I have seen users with LED fixtures using them.
You may want to look at the fixtures specifications. Some say only so many on a dimmer due to power surges.
Go to Top of Page

kvander51
Average Member

62 Posts
Posted - 10/08/2012 :  08:16:26 AM  Show Profile  Reply with Quote
Sounds good. Will post the results (when I receive the fixtures - still a week or so away). Thank you.
Go to Top of Page

BLH
Advanced Member

3759 Posts
Posted - 10/08/2012 :  08:32:37 AM  Show Profile  Reply with Quote
OK Will be waiting for the update.
There was a LED thread in the Lighting section you may want to look at.
http://www.smarthome.com/forum/topic.asp?TOPIC_ID=10811
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2012 SmartLabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07