|
Tfitzpatri8
Administrator
USA
6870 Posts |
 Posted - 10/05/2012 : 4:29:27 PM
|
If you are using HouseLinc's Scene tool, select the scene, uncheck the Responder box for the 2472d, Save the scene, then give HouseLinc time to write the changes to all the controller and responder devices in the scene.
If you are manually linking and unlinking with Set buttons, put the controller scene into unlinking mode first, then within 4 minutes hold the 2472d's Set button down for 5 seconds. (The technique for entering unlinking mode varies depending on which device you are using as scene controller. If it is a SmartLinc, go into the scene settings and click the Remove button. For other kinds of devices, see the online Owner's Manual for details.)
|
Volunteer Moderator & Home Automation Enthusiast |
 |
|
ultiple Devices Respond
