Talk About the Latest in Home Automation/Home Electronics
Home Automation Forum
Smarthome Forum
Shop All INSTEON Products
Login or Register
 
Home | Profile | Register | Active Topics | Search | FAQ | Smarthome
 All Forums
 General Discussion
 INSTEON
 MorningLinc stopped working		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

vphagura
Starting Member

9 Posts
Posted - 04/30/2012 :  5:26:48 PM  Show Profile  Reply with Quote
My morningLinc was working fine and suddenly today it stop responding to the ISY console cmds. It does chg the state from Locked to Unlocked but does not trigger these states to the actual lock.

I can open and close the lock from the MorningLinc by pressing the SET button on it but it doesnt from the ISY.

I read the forum topic at:http://forum.universal-devices.com/viewtopic.php?f=28&t=8473&p=64391&hilit=morningLinc#p64391

and tried all those things and moved my morningLinc to further electrical outlets but did not help.

Need help.. Any ideas?

ScottAvery
Average Member

71 Posts
Posted - 05/01/2012 :  05:52:16 AM  Show Profile  Reply with Quote
LeeG on the UDI forum can probably sort you out if you ask there. Most likely you lost authorization for it in the ISY and have to delete it, factory reset it, and rediscover with the Start Linking command. Mine implodes any time I modify a scene with it. I have to telnet in to the ISY to repair it.
Go to Top of Page

vphagura
Starting Member

9 Posts
Posted - 05/01/2012 :  06:22:11 AM  Show Profile  Reply with Quote
Thx. I did delete it from the ISY and factory reset it but no luck still. I just now posted this on the UDI forum.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Smarthome Forum © 2000-2012 SmartLabs, Inc Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.07