| T O P I C R E V I E W |
| jtr |
Posted - 07/27/2012 : 9:25:16 PM
I have a 2476D v4.5
When I turn it on, the light (load) initially turns on as expected. After several seconds, it turns off then ramps back on. It repeats this process indefinitely. I've performed several factory resets without effect.
Any ideas? |
| 5 L A T E S T R E P L I E S (Newest First) |
| stusviews |
Posted - 07/28/2012 : 9:10:50 PM
Quickly double-tap the On paddle. Does the ramping problem occur?
If it does, then unscrew (or otherwise disconnect) all the bulbs and turn the Switchlinc Dimmer on. Does it still exhibit the problem? |
| jtr |
Posted - 07/28/2012 : 7:48:07 PM
Never used x10. It has always been straight Insteon. The devices were all paired manually years ago before I even had HL.
|
| Tfitzpatri8 |
Posted - 07/28/2012 : 10:21:26 AM
Did you have any x10 unit code or x10 scene programmed into this unit? Is this unit or the x10 code a trigger for any HL Events? |
| jtr |
Posted - 07/28/2012 : 10:15:39 AM
5 or 6 line voltage incandescent recessed lights. It worked for years fine. This happened all of the sudden. Since I posted last night, I air gapped it over night. This morning, I did another reset without effect. Then I used HL2 to remove all links and now it appears to work. I'm going to cross my fingers and rebuild all my links.
Has anyone reported this kind of malfunction before?
|
| Tfitzpatri8 |
Posted - 07/27/2012 : 9:29:54 PM
What is attached as its load--is it a line-voltage incandescent bulb, low voltage bulbs attached to a transformer, cfl or led? How many watts? Is this device set up as a trigger for a HouseLinc event or ISY program? |
