| T O P I C R E V I E W |
| kvander51 |
Posted - 07/23/2012 : 07:53:55 AM
After switching to Uverse and configuring the gateway firewall to allow TCP and UDP access to port 8000 (for the SmartLinc), I find I can access the system by entering the ip address manually (http://192.168.1.xxx:8000) but trying to access it from the smartlinc.smarthome.com "I'm at home" link comes up with "Error: Sorry, cannot find a SmartLinc on your network (public IP address). Please resend your SmartLinc's configuration and try again." Is there additional configuration needed for the Uverse gateway? |
| 3 L A T E S T R E P L I E S (Newest First) |
| kvander51 |
Posted - 07/23/2012 : 09:53:17 AM
Okay, I went ahead and made both changes. Everything is cool! Thanks!!! |
| kvander51 |
Posted - 07/23/2012 : 09:36:25 AM
Ooh - good call. Old router was a Linksys, which was 192.168.1.1. Uverse is 192.168.1.254. Thanks for the tip.
Just one more question: the "subnet mask" was 255.255.255.0. Looking at the Uverse Status page, it shows Subnet Mask of 255.255.252.0, so I need the Smartlinc to reflect that as well?
|
| Tfitzpatri8 |
Posted - 07/23/2012 : 09:18:03 AM
Is the Smartlinc's gateway address still set for the old router lan ip? |
