|T O P I C R E V I E W
||Posted - 07/14/2011 : 07:35:09 AM
I have looked everywhere and can't seem to find an answer to this. I currently have the ICON on/off switch, but the LED operation annoys me. The LED is on when the load is off and vice-versa. Using the Operating Flags I can set the LED to be off all of the time, but can't change it to where the LED is on when the load is on. Do the SmartLinc series of switches in particular the 2476S have the LED illuminated when the load is on, or the ability to change it to this operation by using the Operating Flags.
Thanks in advance
|2 L A T E S T R E P L I E S (Newest First)
||Posted - 07/19/2011 : 10:00:30 PM
Not to mention colors. You can change via light pipe swaps. I love that stuff.
||Posted - 07/14/2011 : 07:54:08 AM
The Icon devices have only the one LED and it illuminates when off to make it easy to locate in the dark.
The SwitchLinc dimmer has multiple LEDs. The bottom of the row is lit when the device is Off and the indicator moves upward to correspond with the dimmer's current level.
The SwitchLinc On/Off switch has two LEDs. The bottom LED lights when off, the top LED lights when on.
Newer SwitchLincs also allow you to change the brightness level of the LEDs.