OPEN BOX ITEMThis is a fully functional returned or demo product. May not have original packaging and may have cosmetic imperfections. Exchanges accepted for defective products only.
- What's Included
The ElkGuard features a PIR motion sensor integrated into the main unit. This sensor is permanently allocated as SENSOR 1. Depending on the ElkGuard operating mode and the programming attributes, the PIR on the main unit can be locked out (or excluded from the system). NOTE: When "Locked Out" the Main PIR is incapable of sensing or reacting to movement.
Wireless Keys are considered any type of wireless device that the user operates by a button. There are several different types of keys modules: a user Keyfob, medical transmitter Pendant, Panic Transmitter and a doorbell.
Activation of the intruder alarm will cause the internal siren to sound for the programmed time. An optional external speaker may also be wired to ElkGuard for additional sound. Also, an optional strobe light may be wired to ElkGuard for visual indication of events. The strobe light can flash for 1 hour if the unit is powered only by the battery or for 12 hours if the unit is connected to the AC transformer power.
Audible Panic alarms (including siren and optional strobe light) may be activated by pressing the special panic button on the 3 or 4 button keyfobs if they have been programmed as "KEY." Audible Panic alarms may also be activated by pressing the single button on the emergency transmitter, provided the emergency transmitter is programmed as "KEY." A silent Duress alarm (without any siren or strobe activation) can be activated by pressing the special panic button on the 3 or 4 button keyfobs if they have been programmed as "DURESS." The system will also be armed or disarmed at the same time. A silent Duress alarm may also be activated by pressing the single button on the emergency transmitter, provide the emergency transmitter has been programmed as "DURESS." Silent Duress means that the system will arm or disarm while a silent Duress alarm is being sent to the central station.
ElkGuard uses EEPROM memory, which is designed to be retained in the event the unit is turned off or resets due to abnormal conditions. Data stored in nonvolatile memory includes all programmed devices and options associated with the device (keys and detectors).
ElkGuard PIR Wireless Motion Detector
ElkGuard Slimline PIR Wireless Motion Detector
ElkGuard Pet Immune PIR Wireless Motion Detector
ElkGuard Door and Window Wireless Magnetic Contact Switch
ElkGuard Mini Door and Window Wireless Magnetic Contact Switch
ElkGuard Wireless Doorbell Button
ElkGuard Wireless Emergency Button
ElkGuard Wireless Emergency Pendant
ElkGuard Wireless 4-Button Keyfob Remote Control
Please Note: The ElkGuard main unit requires access to a nearby GSM transmission tower. It cannot function without adequate signal strength. Some buildings or locations may not be conducive to GSM coverage and the ElkGuard will need to be moved to obtain the best possible signal strength.
Manufacturer: Elk Products Manufacturer Product No.: ELK-106058 UPC: 0762158060588 On-board Motion Sensor: Senses motion up to 45 feet Accessories: Up to 23 wireless devices - sensors or keychain remotes Communications: Built in GSM "cellular" communicator Display: 6 character LED screen Voice Announcements: Reports alarms and events On-board Siren: 124dB Standby Battery: Chargeable 12 volt 3.3 Ah External Output: For optional strobe or external siren Dimensions: 20.5" H x 4.5" W x 3.3" D Weight: 5.75 pounds complete with battery Transmitter Modulation: 100% AM (On/Off keyed) Transmitter Frequency: 303.85 Mhz Transmitter Power: <10uW Certifications: FCC, CE
Re-chargeable battery (pre-installed)
Keyfob (quantity 2)