Frequently Bought Together:
Special Price: $53.94
List Price: $64.99
Your Savings: $11.05
Price For Both: $423.58
- What's Included
The ELK-M1XRFTWKIT Two-Way Wireless Starter Kit is an economical way to quickly and easily add sensors to an ELK M1 or ELK M1EZ8 controller, without the need or difficulty to run any wires. This gives you the ability to monitor additional zones in your home for added security. This starter kit includes an M1 Two-Way Wireless Transceiver, two door-window sensors, pet immune motion sensor (PIR), and two four button key fobs; each available seprately as well to grow your system.
The starter kit's two-way wireless transceiver allows an ELK M1 or ELK M1EZ8 controller to receive status on the wireless sensors and be notified of an intrusion remotely (if your ELK M1 system is IP enabled). The bright, white convenience light on the pet immune motion sensor can be turned on or off by the M1 panels based on your preference as well. The four button key fobs allow you to arm, disarm, and check system status before you enter or leave. A green light on the key fobs signifies the system is disarmed while a steady red light indicates armed state; most important, a blinking red light indicates the system has been compromised to warn you to seek help or enter cautiously.
The starter kit and any additional sensors connected to the system are designed to continually check and monitor the status of all sensors through an active two-way auto-sync feature to ensure the devices are functioning properly. In addition to the active two-way auto-sync feature, the transceiver and sensors communicate by sending one signal at a time which automatically routes through different devices until the signal reaches the transceiver and acknowledges the command or alert. The transceiver and sensors' battery life is prolonged by self-adjusting RF power and signal dispersion that uses the most minimal power needed to clear the signal whether the devices are close together or far apart.
If your ELK M1 system is IP enabled, you can receive a preset text or email for selected events, or monitor status via computer with free M1ToGo software, or monitor status via Apple or Android apps. There is also a cloud based service, Connect One, for M1 controls.
Stater Kit Parts
- M1 Two-Way Wireless Transceiver
The M1 Two-Way Wireless Transceiver allows an ELK M1 or ELK M1EZ8 controller to receive and transmit wireless radio frequency (RF) signals to ELK Two-Way wireless transmitters. The transceiver connects to an ELK controller via the 4-wire RS-485 Data Bus and supports up to 144 individual wireless sensors. Multiple receivers (sold separately) may be added for additional coverage. The transceiver documents transmissions in the control's event log. The transceiver's firmware is "flash" updatable.
- 4 Button Wireless Keyfob
The Two-Way Wireless Key fob features 4 color coded buttons and a single LED feedback indicator. The key fob allows you to Arm, Disarm, Interrogate (query) the Alarm System Status, and Trigger programmable events such as a Panic Alarm, Relay activation, and more. The key fob communicates with the transceiver by sending a unique TXID identifier, then waiting for an acknowledgement that the command was received. Additional unique features include a half-a-second accidental event activation lag to prevent false commands, on-demand status update capabilities, extended communication range, and a long battery life.
- Two-Way Wireless Slim Line Door and Window Sensor
The wireless, slim line door and window sensors advise your M1 system of open doors and windows which can provide simple voice alerts, trigger lighting and/or sound the alarm, depending on your armed status. These wireless sensors can be mounted on narrow jamb doors or windows to transmit a wireless signal to the transceiver, if the sensor and magnet are separated, to trigger an alarm. Each sensor has a built-in reed switch with front and back tamper options to prevent false alarms. The sensors constantly self-monitor and adjust ideal RF power levels to deliver clear signals and maximize battery life. Two-Way technology enables the M1 controls to send signals to the motion detector to begin walk test mode at the keypad rather than climbing a ladder to set the motion sensor in walk test mode.
- Two-Way Wireless PIR with Pet Immunity
The Two-Way Wireless, PIR Motion Sensor from ELK Products features a unique Pet Immunity for animals up to 40 pounds and is designed for use with ELK M1 controllers and transceivers that utilize ELK's two-way wireless technology. The sensor is a dual element, pyro electric sensor that detects infrared (IR) energy movement across the sensor's 40 feet by 40 feet cover range and includes tamper protection and a swivel mounting bracket. The motion sensor transmits continuous signals of low battery, tamper, and alarm messages until a signal acknowledgement is received from the controller. Additional unique features include keypad enabled or disabled "Walk Test" mode and a bright, high intensity, white LED convenience and security light. Two-Way technology enables the M1 controls to send signals to the motion detector to begin walk test mode at the keypad rather than climbing a ladder to set the motion sensor in walk test mode.
Remote Control Options
The M1ToGo is Windows software for PCs providing you full access to your M1 system to control and monitor security, lighting, thermostats, door or gate access as well as any other sub-systems integrated with the M1. The M1ToGo is available for FREE download with no monthly fees and can be installed on a USB flash drive for portability.
The eKeypad family of smartphone applications for iPhone, iPod Touch, and iPad allow you to choose the level of remote control you desire with your M1 system. Apps range from Security only to the ability to control everything integrated with an M1 system plus Russound Audio and viewing of CCTV cameras. eKeypad apps are available at a nominal cost with no monthly fees.
- myKeypad Pro
myKeypad Pro is an Android smart phone and/or tablet application for M1 Controls. Remotely control security, lighting, thermostats, outputs, and more. myKeypad Pro is available at a nominal cost with no monthly fees.
- Connect One
Connect One is a web hosted service that lets you view, manage, and control M1 systems through any web enabled device, including smartphones. Connect One is the only service allowing you to manage multiple M1 controls, as well as, providing businesses the capability to manage their employee's security credentials. Connect One requires monthly fees based on the complexity of the system(s).
Specifications Manufacturer ELK Products Manufacturer Product No. ELK-M1XRFTWKIT UPC 762158160271 Manufacturer Warranty 2-year limited warranty M1 Two-Way Wireless Transceiver Specifications Operating Frequency 902 Mhz to 928 Mhz Transmission Duration (Active On-time) 50 ms Sensitivity > 105 dbm Operating Temperature 0 to +120 degrees F Operating Voltage 12 Volts D.C. Current Draw 25mA receiving, 85mA transmitting Housing Dimensions 6.75 inches x 4.69 inches x 1.13 inches Compatible Sensors 4-Button Keyfob
Mini Window Sensor
Motion Sensor (PIR)
Slime Line Door and Window Sensor
Universal 3-zone Sensor
Motion Sensor (PIR) with Pet Immunity
Slim Line Door and Window Sensor Specifications Operating Frequency 902 Mhz to 928 Mhz hopping Maximum Operating Gap Of Reed 1/2 inches Tamper Field installed plunger for front and back detection Auto-Sync Type B Power Source 3.6V ER14250 lithium battery Battery Life 7 years (typical) Operating Temperature 14° to 104°F (-10° to 40&dge C) Humidity Up to 95% RH Unique TXID Code Over 1 million combinations Dimensions Size:0.71 inches (W) x 3.4 inches (L) x 0.8 inches (D)
Magnet:0.57 inches (W) x 1.5 inches (L) x 0.6 inches (D)
Four Button Keyfob Specifications Operating Frequency 902 Mhz to 928 Mhz hopping Auto-Sync Not Applicable Power Source Permanent, non -replaceable battery Battery Life 5 years Operating Temperature 14° to 104°F (-10° to 40°C) Relative Humidity 5-95% Non-Condensing Unique TXID Code Over 1 million combinations Dimensions 1.37 inches (W) x 2.44 inches (L) x 0.52 inches (D) td> Two -Way Wireless Pet Immune PIR Motion Sensor Specifications Operating Frequency 902 Mhz to 928 Mhz hopping Pet Immunity Up to 40 lbs Sensor Duel element pyroelectric Coverage Hi Range: 40x40 feet
Lo Range: 30x30 feet
20 dual element zones: 10 long, 4 intermediate, 4 mid, and 2 short
Pulse Count 1-2 or 3-4 (selectable) Sleep Time 30 seconds or 120 seconds (selectable) RF Signal Acknowledgement Green=acknowledged
Security/Convenience LED Bright White Warm Up Period 10 seconds Operating Voltage 3V DC Power Source 2 Lithium batteries CR123A Battery Life 7 years (typical) Coverage Range Selectable range up to 40 feet x 40 feet Sensor Adjustable pulse count helps eliminate false trips Composition High quality dual element Pyroelectric sensor Operating Temperature 32°F to 120°F Humidity Up to 95% RH Dimensions 2.8 inches (W) x 4.4 inches (H) x 1.9 inches (D)
Leave a Review
- 1x - M1 Two-Way Wireless Transceiver
- 2x - Door and Window Sensors
- 2x - Four Button Keyfobs
- 1x - Motion Sensor (PIR) with Pet Immunity
- 1x - M1 Two-Way Wireless Transceiver