ELK ELK-MM443 Programmable Controller Magic Module
Share Share Share Share Share
Rewards: 162 Points

ELK ELK-MM443 Programmable Controller Magic Module

Use as a Stand Alone Field Programmable Controller in a Vast Array of Applications
  • Four analog or digital inputs and Four relay outputs (2 relay outputs may be jumper programmed for transistor open collector outputs)
  • 16,384 program bytes using SIMPLE programming language
  • 4 general purpose Counters, range 0 to 255 counts
  • 4 general purpose Timers, range 1/10 second to over 255 hours
  • Program stored in non-volatile EEProm memory


Frequently Bought Together:
  • Details
  • Specs
  • Reviews
  • The ELK ELK-MM443 Programmable Controller Magic Module® is a four analog or digital input, four relay output programmable logic controller (PLC). It may be used as a stand alone field programmable controller in a vast array of applications from timers, door controllers, simple process controllers, multiple zone security controls, etc. or as a networked controller with up to 31 other modules connected on a common RS-485 data bus. The Programmable Controller Magic Module offers 16,384 program bytes using SIMPLE programming language. It features 4 general purpose Counters (range 0 to 255 counts) and 4 general purpose Timers (range 1/10 second to over 255 hours).

    The Magic Module supports transmitting and receiving commands from two way X-10® Power Line Carrier Devices. Also optional interfaces are available for reading Temperature, Clock/Calendar, and Dallas iButton® identification devices.

    The Magic Module is programmed by a personal computer. The program is stored into re-programmable Electrically Erasable Programmable Read Only Memory (EEProm memory). The ELK-MB485 is the interface used to transfer the program from the computer the Magic Module.

    • Networked to optional PC and up to 31 ELK-MM443's through a RS-485 data bus.
    • X-10 Power Line Carrier Interface.
    • Analog transmission MM443 to MM443 and Preset Dim Commands
    • Dallas iButton TouchKey Reader
    • Programs the ELK-MM220 Magic Module (two inputs, two relay outputs)
    • Emulates ELK-MM220 Magic Module for code development
    • Mounts to single or double gang electrical box.
    • Optional DIN Rail Mounting. PCB mounts into 4 inch SnapTrack
    • Lifetime Limited Warranty
    • Inputs: 4 Analog, 0 to 13.6 volts, with jumper programmable 2k pull up resistor to 12 V, or 2k pull down resistor to ground. May be left floating. Software programmable high and low threshold levels per input for end-of-line resistor circuits. Input impedance (floating input) - 100K ohms
    • Outputs: 4 Form "C" Relays, 10 Amps @ 120VAC or 7 Amps @ 28VDC; Two relay outputs may be configured as open collector transistor outputs - 100 ma. Max.
    • Operating Voltage: 9.5-15 Volts DC
    • Current Draw: 10 ma. Nominal, 130 ma. Maximum with all relays active.
    • X-10 Interface: PL513, PSC04 or TW523, PSC05 - 4 wire RJ-11 telephone style
    • Data Bus: RS-485, max bus length: 4000 feet w/22 AWG wire
    • Enclosure: White Plastic: 6.5" W x 4.375"H x 2"D
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

place your order by 3pm PT for same day shipping

Please wait...