DIGI-5 Local Source Audio Input Module with IR
Share Share Share Share Share
Rewards: 82 Points

DIGI-5 Local Source Audio Input Module with IR

Be the first to review this product

Connect any Analog or Digital Audio Source to your DIGI 5 Whole-Home Audio System
  • Compatible with analog audio, digital coaxial audio and digital optical audio
  • Override the main audio source on a DIGI-5 whole home audio system
  • Connects via cat. 5 to a DIGI-5 keypad or audio connection hub
  • IR output jack for local source control
  • Converts analog audio to digital audio

Item #: 81307

In stock - Ships Today

Special Price: $82.46

List Price: $134.00

Your Savings: $51.54

  • Details
  • Specs
  • Reviews
  • What's Included
  • If you are using a Xantech DIGI-5 1-Source, 4-Zone or a 4-Source, 4-Zone Cat. 5 Whole-Home Digital Audio Distribution Kit you can use this Local Source Wall Plate to connect a source (CD player, MP3 player, etc.) located within a remote room away from the main distribution system. This product is the ideal accessory for either of the Audio Distribution Kits, letting you enjoy whole-home audio in one moment and in the next moment you can switch to local source within a zone. The wall plate fits in a standard single-gang junction box and has a Decora-style finish. Using a cat. 5 cable connection, it will easily connect with a Xantech Keypad Amplifier for a local source input or the Xantech Digital Distribution System Hub via for a remote source input; both are included with a Digital Audio Distribution Kit. The DIGI 5 Local Source Wall Plate provides input connections for Analog Audio, Digital Optical Audio, Digital Coaxial and RJ-45 outputs for the cat. 5 cable connection to a keypad or hub. Additionally, an infrared (IR) output has been built-in for IR Control of the connected source. The DIGI 5 Local Source Wall Plate gives you the power of choice, letting you override a source input from the main system and listen to a local music source in a separate room.

    Please Note: Multi-channel digital audio formats (5.1, 7.1, etc.) are not supported by the DIGI 5 Local Source Wall Plate.


    Connecting the Plate to a Keypad and/or Hub
    The Input Wall Plate and all associated components are wired using cat. 5 terminated to the T-568A Wiring. When pre-wiring, run lengths of CAT. 5 from the pre-determined equipment location (the "head-end") to each Amplifier Keypad location. The cat. 5 cable routes all audio, power, IR and status information needed for full system operation. Use a 110 Punchdown tool to connect the cat. 5 wiring to the Digital Audio Distribution Hub.

    Note: For maximum performance over long runs (more than 150 ft) run an additional 16AWG 2-conductor wire for external power.

    IR Out
    Connect a standard IR emitter from the IR OUT port on the front of the wall plate to the IR receiver on the front of the audio source. For sources that have an IR Input port on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable instead.

    Rear Connections
    When utilizing the wall plate as a means to connect a Local Source to a specific zone of a Xantech DIGI audio system, the connections consists of plugging in a cat. 5 cable terminated to an RJ-45 connector wired to T-568A standard to the RJ-45 jack on the rear of the wall plate. The other end simply plugs into the LOCAL PORT RJ-45 jack on the rear of the zone's keypad.

    When utilizing the wall plate as a means to connect an audio source to an expansion hub in stand-alone mode, the connections consists of plugging in a cat. 5 cable terminated to an RJ-45 connector wired to T-568A standard to the RJ-45 jack on the rear of the wall plate. The other end simply plugs into the SOURCE LOOP IN RJ-45 jack on the rear of the expansion hub.

    Settings/Adjustment
    There is one LED on the front of the wall plate that monitors the input level of the connected source. There are two sets of DIP switches on the rear of the unit (marked "GAIN") designed to adjust the input level of the connected source.

    Note: The GAIN DIP switches are only for Analog Inputs. The Digital Coaxial and Digital Optical Inputs do not utilize these switches.

  • Specifications

    Manufacturer: Xantech
    Manufacturer Product No.: D5IP
    UPC: 042777316014
    Sampling Frequency: 48kHz
    Digital Audio Resolution: 24 Bit, Stereo
    THD+Noise Full Scale: 0.004%
    Dynamic Range: 96dB
    L/R Crosstalk @ 1kHz: -90dB
    Frequency Response: 20Hz-20kHz +/- 0.1dB
    Max Output Distance: 800 feet
    GAIN DIP Switches: All down = No GAIN, Dip switch 1 & 3 up = +4dB GAIN, DIP switch 2 & 4 up = +*dB GAIN, DIP Switch 1,2,3,4 up = +10dB GAIN
    Dimensions: 4 1/4" H x 1 3/8" W x 2 3/4" D (10.8cm x 3.5cm x 7.0cm)
    Weight: 0.28lbs (0.13kg)
    Connection Ports: Analog L/R audio input, Digital Coaxial audio input, Digital Optical audio input, 3.5mm IR output, RJ-45 output (x2)
    Operating Environment: 32° F - 104° F ((0° C - 40° C); Humidity 0% - 90%
    Certifications: FCC


  • Leave a Review

    You're reviewing: DIGI-5 Local Source Audio Input Module with IR

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • DIGI 5 Local Source Audio Input Wallplate with IR
    • Owner's Manual
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart