Automated Environmental Systems ATP3000L Decorator-Style Temperature and Light Sensor
Share Share Share Share Share
Rewards: 47 Points

Automated Environmental Systems ATP3000L Decorator-Style Temperature and Light Sensor

Save Energy by Turning on Lights Only When You Need Them!
  • Increase safety while conserving power
  • Automatically turn on lamps and lights when it's dark
  • Attractive Decorator style blends elegantly in any home
  • Great for automatically turning on outdoor landscape lighting

Item #: 1526

In Stock! SHIPS TODAY!

Special Price: $47.50

List Price: $59.99

Your Savings: $12.49

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Want to save power, without the risk of stumbling into furniture when you come home? Let your home automation controller turn on the lights only when you need them with the help of this elegant, Decorator-style Temperature and Light Sensor! Mount this clean-looking sensor in any room to send ambient temperature and light readings to any home control interface with analog inputs, like the Stargate, TimeCommander Plus, HomeVision and LynX-10 systems. Create ideal lighting and temperature macros, increasing your comfort while conserving energy! Regulated power supply voltage between +5-30VDC required.



    For example, if the sensor detects a temperature above a pre-determined level, you can program the controller to close the motorized drapes, turn a ceiling fan on, or, if necessary, crank-up the air. If your home is equipped with electronic duct dampers and motion sensors, you can even direct the air conditioner to only cool the rooms that are occupied. The built-in light sensor allows you to control indoor lamps based on the amount of light in the room. You can also mount the sensor outdoors in a weatherproof box to control your landscape lighting! These sensors will not only make your home more energy efficient, they'll also save you money on your monthly electric bill!

    Operation is simple. Just connect a regulated power supply voltage between +5-30VDC to the screw-down terminals in the rear. Once powered, the unit produces a linearly scaled analog signal proportional to the temperature it detects. That signal can be sent across more than 1,000 feet of cable to the analog input of a compatible controller. For optimum results, use 4-conductor, shielded cable, home run between each sensor and the controller. Two conductors each will be used for the light and temperature detectors. The shield will be a common ground for both circuits.

  • Specifications

    Automated Environmental Systems Product No.: ATP3000L
    Power Supply: +5-30VDC (sold separately)


  • Reviews 1 - 10 of 35

    Page:
    1. 1
    2. 2
    3. 3
    4. 4
    Review of 1526 Review by GORDON
    Review of 1526
    Rating

    Excellent product, great price.

    Posted on 1/15/2014

    Review of 1526 Review by BRYAN
    Review of 1526
    Rating

    Good, but should note that it is a little smaller than stock plates.

    Posted on 1/6/2013

    Review of 1526 Review by BRYAN
    Review of 1526
    Rating

    A bit smaller than my stock wall plates and shows the previous paint. This should at least be mentioned. It's a good value for the money though.

    Posted on 12/27/2012

    Review of 1526 Review by DARIO
    Review of 1526
    Rating

    Excellent face plates, liked that the screws had the little metal piece behind the plate so the screw doesn't fall out when you unscrew it.

    Was able to screw tightly without having the plate break like some other cheaply made ones.

    Posted on 8/10/2012

    Review of 1526 Review by MARK
    Review of 1526
    Rating

    Runs slightly smaller than the original plate

    Posted on 3/13/2011

    Review of 1526 Review by ROGER
    Review of 1526
    Rating

    The plastic wall plate was flimsy and cracked when I screwed it into place

    Posted on 7/16/2008

    Review of 1526 Review by JOSHUA
    Review of 1526
    Rating

    Perfect Fit!

    Posted on 2/9/2008

    Review of 1526 Review by ANDREW
    Review of 1526
    Rating

    Mid size plate good for hiding wall imperfections.

    Posted on 12/15/2007

    Review of 1526 Review by CHANG
    Review of 1526
    Rating

    It works very well.

    Posted on 8/11/2007

    Review of 1526 Review by GARY
    Review of 1526
    Rating

    Matches our dull white paint. Perfect!

    Posted on 6/19/2007

    Leave a Review

    You're reviewing: Automated Environmental Systems ATP3000L Decorator-Style Temperature and Light Sensor

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • Decorator-Style Temperature and Light Sensor
Norton McAfee
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart