ATON AIKT Plasma Friendly IR Receiver and IR Emitter Distribution Kit
Share Share Share Share Share
Rewards: 225 Points

ATON AIKT Plasma Friendly IR Receiver and IR Emitter Distribution Kit

IR Distribution System Routes Signals from your Remote Control to A/V Components in Cabinets or Closets

Item #: 8841

Product is unavailable

  • Details
  • Specs
  • Reviews
  • What's Included
  • Tabletop IR Receiver
    The ATON AIR5 is a miniature 'plasma-friendly' IR receiver designed to sit on a shelf, cabinet or any flat surface. This receiver uses advanced IR filtering technology which allows it to work even in areas that receive normally harmful interference (near plasma TV's, compact fluorescent lights, etc.). The IR lens rejects visible light interference and an internal crosshatch shield inhibits EMI/ESI interference. The plug is attached to an eight foot cord allowing plenty of room for convenient placement of the receiver. Built-in status and activity indicators offer LED feedback for system On/Off and IR signal activity.

    Talk Back IR Emitters
    ATON IR Emitters are designed for reliable transmission of IR signals as well as easy installation. All emitters feature a convenient docking module that stays in place on the IR window of the A/V component, allowing you to easily remove the emitter when rearranging or servicing A/V equipment. The ATON AIE2 is a sophisticated, detachable IR emitter. It features a docking station that permits temporary removal of the emitter for rearranging or servicing components. The AIE2 flashes red when emitting IR signals, making it an ideal troubleshooting tool. The emitter housing is transparent, which allows IR commands from handheld remotes to pass through the housing and control the equipment. An optional IR blocking shield is included with each model to prevent interference from other IR emitters at the equipment location. All emitters have 8' leads and a standard 3.5 mm plug.

    Amplified IR Connecting Block
    An IR distribution block is the hub of any stand-alone IR distribution system. IR receivers receive IR commands from your remote and pass those commands on to the distribution block. The distribution block then splits out these commands to multiple connected IR emitters which are attached to the devices needing to be controlled. The ATON AIB4 is a single input, four output Amplified IR Connection Block designed to provide a convenient way of interconnecting IR control products. It ensures that any IR command that is received is sent out with equal signal strength to each connected IR emitter using a robust, wide-bandwidth amplifier with reverse voltage protection so that it has the ability to drive both mini-emitters and high-output emitters reliably. There are four IR emitter outputs that support both standard IR emitters and high-power IR blasters. IR receivers can be connected either to the 3.5 mm jack of the AIB4, or to the flip-lock connector for bare wire connections. Each emitter has a docking station with adhesive tape; simply mount the docking station to the IR receiver window on your component and slide the emitter into place.

  • Specifications

    Manufacturer Product No.:AIKT
    Warranty:Five (5) year manufacturer limited warranty
    Tabletop IR Receiver
    Manufacturer Product No.:AIR5
    Power:12V DC@ 6mA
    Mounting:Sits on any flat surface
    Carrier Frequency Acceptance Range:28kHz to 90kHz
    Control Range:Up to 35 feet, depending on remote strength and ambient noise conditions
    Control Angle:+/- 50 degrees off-axis
    Room-to-Room Wire Recommendations:Cat. 5
    Maximum Recommended Cable Length: 1200 feet using cat. 5
    Dimensions:3 3/16" W x 1 1/8 H x 1 1/16" (81mm W x 28mm H x 27mm D)
    Talkback IR
    Manufacturer Product No.:AIE2
    Connector:3.5mm mini-plug
    Cord Length:Eight (8) feet
    Connection Block
    Manufacturer Product No.:Time, Sensor Input, Motion Detection
    Connection Terminals:Accepts wire sizes 14 to 28 AWG for: 12v DC power, Ground, Status Out an IR in
    IR Connections:LP IR OUT, LP/HP IR Out, /font>
    Emitter Connections:3.5mm mini-plug ports for IR emitters and receiver
    Power Requirements:12V DC 200mA power supply (included)

  • 2 Reviews

    Review of 8841 Review by KAROL
    Review of 8841

    The product works great especially compared to some others I tried before. The receiver is small and has a nice look which blends in easily with the TV (black base). The installation was not very difficult once you selected the right directions for your particular set up. Overall we are pleased with the purchase and would use this product again in the future.

    Posted on 1/17/2011

    Review of 8841 Review by GEORGE
    Review of 8841

    fast delivery, great product

    Posted on 8/27/2009

    Leave a Review

    You're reviewing: ATON AIKT Plasma Friendly IR Receiver and IR Emitter Distribution Kit

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

  • One (1) AIR5 Tabletop IR Receiver
  • Four (4) AIE2 Talkback IR Emitters and IR blocking shields
  • One (1) AIB4 Amplified IR Distribution Block
  • One (1) Quad-to-Mono 3.5 mm cable
  • One (1) PS2 12VDC/200mA Power Supply
  • Owner's manual
place your order by 3pm PT for same day shipping

Please wait...