Master Bedroom — Master Control
Leaving lights on around the house when you are already in bed and don't want to get up again to go around and turn them all off one by one.
The following solutions offer simple and easy ways to use Insteon products that can control the lights from either the keypad with creating a keypad-controlled scene, or with the use of the Insteon Hub.
Turn off Insteon-controlled lighting with a push of a button.
Link an Insteon 6-Button Dimmer Keypad or 8-Button Dimmer Keypad to your Insteon-controlled lights, and turn them all off with a push of a button.
Step 1 - Choose the button that you want to control the scene
Press and hold the scene button that you want to use to control the desired lights.
Step 2 - Ajust the responder to the desired level
Press and hold the on button to set the responders desired state.
Step 3 - Start the linking process
Press and hold the keypads set button until the keypad beeps.
This will put the keypad into linking mode.
Step 4 - Complete linking of Insteon devices
Press and hold the responders set button until it double-beeps.
By using a scene this refers to using multiple Insteon products together, this allows the 6/8-Button Keypad to turn on/off linked Insteon-controlled lights at the same time.
*Repeat for each device you wish to add to the scene.
**Insteon Dimmer Switch used as an example.
Add your Insteon 6 or 8-Button Dimmer Keypad and other Insteon switches or keypads to a Insteon Hub. Configure a scene with the Insteon hub to control your lights from anywhere in your house from your smartphone.
Step 1 - Login to the Insteon App
Log into the Insteon App.
Step 2 - Open the Menu
Click on the drawer icon located in the upper right hand corner.
Step 3 - Add a Device
Click on the Add a Device.
Step 4 - Select the product type
Select the Wired-In icon.
Step 5 - Press set button
Press and hold the set button on your 6 or 8 button keypad until you hear a double-beep.
Step 6 - Verification of Connection
The device will run through some diagnostics.
Step 7 - Device has been Added
The device has been added now.
Step 8 - Add devices to the hub
Add your other Insteon switches or keypads to the hub.
*Follow steps 2-7 for each additional Insteon device you would like to add to the hub.
**For a list of all Insteon switches, click Here.
Step 9 - Create a scene
Open the Menu and click on Create a Scene.
*By using a scene this refers to usig multiple Insteon products together, this allows the 6/8-Button Keypad to turn on/off linked Insteon-controlled lights at the same time.
For addition help with creating a schedule, click Here.
Step 10 - Add devices to the scene
Select the Insteon devices that you wish to add to your scene.
Then click Next.
Step 11 - Adjust the devices settings
Set the devices to the desired state, ie. on/off, or anywhere in-between.
Then click Done.
Step 12 - Add devices to the scene
Click Yes to complete the scene.
Step 13 - Go to Scenes
Under the Menu, click on Scenes.
Step 14 - Scenes Selection
Click on the Scene that you wish to turn on/off.
Step 15 - Control your scene
From this screen, you can turn the Scene on/off.