Aeon Labs DSB09104-ZWUS Z-Wave Home Energy Monitor
Share Share Share Share Share
Rewards: 99 Points

Aeon Labs DSB09104-ZWUS Z-Wave Home Energy Monitor

Reports Energy Usage and Cost for Your Entire Home
  • Measures energy in wattage and kilowatt hour
  • Easy installation into home circuit box; no electrician required
  • IP43 rated to withstand most outdoor weather environments
  • 280-foot RF range
  • Upgradeable firmware to stay compatible with latest Z-Wave protocol and commands

Item #: 75505

Product is on backorder

Special Price: $99.95

List Price: $169.95

Your Savings: $70.00

Frequently Bought Together:

Aeon Labs DSB09104-ZWUS Z-Wave Home Energy Monitor

Special Price: $99.95

List Price: $169.95

Your Savings: $70.00


Vera Control, LTD VeraLite INSTEON-Compatible Z-Wave Controller

Special Price: $179.00

List Price: $199.00

Your Savings: $20.00

Price For Both: $278.95

  • Details
  • Specs
  • Reviews
  • What's Included
  • See how much energy you are using in your home with this compact, easy-to-install Z-Wave Home Energy Monitor. This Energy Monitor's current transformer clamps fasten around the AC mains in your circuit box for installation and have been weatherized with an IP43 rating to resistant to rain and snow. The monitor will immediately begin reporting energy usage information to your Z-Wave gateway so you can view the data on your computer. All communications are done wirelessly over radio frequency (RF) and have a transmission range of up to 280 feet. Energy usage is reported in wattage or kilowatt hours. The monitor requires the use of four AA batteries which should last up to one year with normal usage. An electrician is not required for installation though highly recommended to ensure aboslute safety.

    Unless otherwise stated, the circuit box's main breaker should be turned off to perform these installation steps:
    1. Turn the main breaker off.
    2. Open the main circuit box panel.
    3. Clip one clamp of the meter around the incoming electricity cable that connects to the main circuit breaker.
    4. Connect the clamp to the meter using a Clamp Connector.
    5. Connect the AC Wire to the meter using the AC Wire Connector.
    6. Wire the AC Wire into one breaker. The brown wire is Live, the blue wire is neutral.
    7. Replace the main circuit box panel.
    8. Turn the main breaker back on.

    It is now time for placement of the Home Energy Meter's main body. A radio antenna is inside the meter and is used for communications. This must be taken into consideration when selecting a location for setting up the meter because if the circuit box is made of metal the radio signal strength may be reduced. Should this be the case then it is recommended that the main body of the meter be installed outside the circuit box as this will greatly improve the radio signal strength of the energy meter. The Home Energy Meter has been weatherized to the international IP43 standard so that it is resistant to rain and snow when placed vertically with the wires protruding from the bottom of the unit.

    Placing the Home Energy Meter:
    1. Unslot the backing plate from the back of your meter.
    2. Affix the plate to the selected wall space using the provided screws.
    3. Attach your meter to the backing plate.

  • Specifications
    Manufacturer Aeon Labs
    Manufacturer Product No. DSB09104-ZWUS
    RF range 280 feet (outdoor)
    Power 4 AA batteries (sold separately)
    Certification FCC, CE, G-TICK, ROHS for USA, European, and Australian markets
  • 5 Reviews

    Review of 75505 Review by strider
    Review of 75505

    very disappointed.
    Instructions are not current, internet is filled with tremendous number of fixes, my Vera-lite controller does not recognize. Install time measured in days

    Posted on 7/12/2014

    Review of 75505 Review by Wendy
    Review of 75505

    Who can tell me how to find the real time energy data from my computer? Should I need to install some special software for this purpose?

    Posted on 8/11/2013

    Review of 75505 Review by DANIEL
    Review of 75505

    Works quite well, I've had it installed for nearly a month now. The data seems reliable. It's a little scary to self install. I would recommend you get an electrician or someone who knows what they are doing.

    Posted on 12/29/2012

    Review of 75505 Review by HARRY
    Review of 75505

    Works great with Vera3 - installed with USB power - I'm not sure how accurate is its reporting

    Posted on 7/1/2012

    Review of 75505 Review by PETER
    Review of 75505

    Basically works as advertised. Easy to install. Communicates perfectly with my network, seems mostly accurate compared to my power company smart meter. Mfg support on website is non-existant. There are three real-time data fields for power, and oddly the total is sent per configuration but the individual clamps are never sent unless it is polled. Otherwise, great device for the money.

    Posted on 2/15/2012

    Leave a Review

    You're reviewing: Aeon Labs DSB09104-ZWUS Z-Wave Home Energy Monitor

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • 1x - Energy sensor
    • 2x - CT clamps
    • 1x - AC/DC adapter

Norton McAfee
place your order by 3pm PT for same day shipping

Please wait...


Item has been added to your cart

Item has been removed from your cart