Ad Hoc EZT-MDCWH EnOcean Wireless Window/Door Sensor
Share Share Share Share Share
Rewards: 83 Points

Ad Hoc EZT-MDCWH EnOcean Wireless Window/Door Sensor

Be the first to review this product

Wireless Sensor can be used to Monitor Doors, Windows or Almost Anything that Opens and Closes

Item #: 29258

Sorry, This product is currently unavailable!
  • Details
  • Specs
  • Reviews
  • What's Included
  • The Wireless Window/Door Sensor is a wireless magnetic contact and powered by a solar cell and works absolutely maintenance-free. It sends a wireless signal to an AD HOC receiver (plug-in dimmer, relay or low voltage relay) when the contact is broken. Ideally, this is used to trigger a light to turn on using a low voltage relay receiver you can trigger and number of devices to be activated through a security system or other home system. Using the integrated Reed contact, the module monitors the position of the laterally mounted magnet and informs about changes of the status. The reed contact housing and the magnet housing are very small. This means that the EnOcean magnet contact is unobtrusively mountable at every window or door frame made of aluminum, plastic or wood. An integrated energy store allows unrestricted functionality for several days in total darkness. In addition, a life signal is sent with an interval of about 15 min.

    More About These Lighting Controls
    Wireless controls can be placed virtually anywhere and control any device that is within range. This flexibility opens up the opportunity for energy savings that was not available in the past. To accomplish energy savings in an existing home or building, a system of self-powered wireless controls can be installed to decrease the amount of energy used from lights, HVAC units, and devices that draw standby power. Self-powered wireless motion sensors can be used to turn lights and other devices off when a room is unoccupied. Self-powered wireless temperature sensors can be used to set heating or air conditioning to an "economy" setting. A master switch can be used to stop current from entering devices that draw standby power and easily ensure lights, fans, and other devices are off when exiting. Whatever the application, Self-powered Wireless Controls make it easy to implement a cost-saving energy management system.

    Expand your EnOcean automation system with these Illumra products
  • Specifications
    Manufacturer AD HOC
    Manufacturer Product No. E3T-MDCWH
    Range 100 Feet
    Frequency 315 MHz
    Measurable Light Range 0-150 lux, 0-47.2 foot candles
    Power Generation Solar cell x 3, minimum level for charge=40 lux
    Full Charge Operating Period minimum 24 hours
    Transmission Period 100 seconds +/- 20 seconds minimum
    Antenna Integrated 15cm whip
    Operating Temperature -13° to +145°F (-25° to +65°C)
    Relative Humidity 5% to 95% RH (non-condensing)
    Weight 1.3 oz. (38 gm.)
    Mounting Ceiling mount with screws (not supplied), velcro, or double sided tape

  • Leave a Review

    You're reviewing: Ad Hoc EZT-MDCWH EnOcean Wireless Window/Door Sensor

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • 1x - EZT-MDCWH EnOcean Wireless Window/Door Sensor
    • 1x - Installation Guide

place your order by 3pm PT Mon. - Fri. for same day shipping

Please wait...