A-Neutronics 9-Outlet Rack-Mountable Power Conditioner Power Strip (PDU) with Built-in Power Meter has many features, including Power Monitoring Display; 9-AC Outlets (7 in the front and 2 in the rear); Isolated Banks; Linear Filtering Technology; and coaxial, telephone, and Ethernet protection circuits. This device can be mounted in a rack, utilizing 1RU of space, or used as a desktop.
There are four status LED's indicating incoming power, grounding, and surge protection. This PDU also has a power monitoring display, showing Voltage, Amperage, Watts, Apparent Power, Frequency, Power Factor, Kilowatt-hour, and Run Time. Each coax connection supports any type of RF signal up to 3.0 GHz, including but not limited to DirecTV®, Dish Network®, Cable STB, Off-Air antenna, and others.
Power Monitoring Display
The built-in power meter shows eight different values for all nine (9) outlets. When the power strip is first plugged into an AC power source and the power is turned on, the backlit display will show the incoming voltage and will remain on until the Function button is pressed. The power meter has eight (8) meter functions; Voltage, Amperage, Watts, VA (apparent power), Hz (frequency), PF (power factor), kWh (kilowatt-hour), and Run Time (clock).
9-AC Outlets Total
There are 7 AC outlets on the rear and 2 on the front. The rear 3 and front 2 are "always on". These five (5) outlets are energized the moment the 10° power cord is plugged into an AC outlet. There are LED's above each of these outlets to indicate they are energized. There are 3 switched Filtered outlets and 1 switched high current outlet. These switched outlets respond to the front panel power button (labeled: "Switch" on the front panel).
Linear EMI/RFI Noise Filtration with Isolation between Outlet Banks: Your electronic components are constantly being subjected to electromagnetic interference (EMI) and radio frequency interference (RFI) through their AC power source. These types of interference can cause degradation of the overall performance of your entire system. Common symptoms of interference include loss of picture detail, dull colors, pops, hisses, hums and other artifacts. The ANI-17015ASUR is designed to eliminate these types of interferences and provide clean power to your equipment.
Linear Filtering Technology (LiFT)
For improving picture and sound quality nothing filters AC noise better. LiFT evenly eliminates noise across the entire bandwidth, ensuring peak audio and video performance by reducing harmonic distortion and improving the signal-to-noise ratio. With LiFT, you are assured consistent performance and the highest resolution from any audio or video system.
Cable/ Antenna / Satellite as Well as Telephone and LAN Line Protection
Coaxial protection circuits achieve optimum signal quality from our new coaxial protectors that have the smallest signal loss on the market - less than 0.5 db of attenuation from 0Hz to 3.0GHz. Our upgraded coaxial protection has been specifically designed to virtually eliminate signal loss. The clamping level of 75V will meet the demands of both cable and satellite voltage while minimizing exposure to damaging spikes and surges. The ANI-17015ASUR provides telephone protection on one set of RJ-11 jacks. The telephone line protection circuitry utilizes solid-state SIDACtors for reliability and unsurpassed protection.
Specifications Manufacturer A-Neutronics Manufacturer Product No ANI-17O15ASUR UPC 857391003093 Electrical Rating Protection Peak Surge Current 270kA @ 8 X 20's Clamping L-N 330 ,L-G 500 ,N-G 500 EMI/RFI Filtering 60dB @ 100kHz Response Time < 5ns Input Connection Type SJT 14AWG cord, 5-15P (15A) Color Black Form Factor Floor/Wall mountable Phone Protection RJ-11 (One-in/Two-out) Coax Protection Signal bandwidth up to 3.0GHz
Signal attenuation > -0.5dB
Output Connection Type Back (7x) NEMA 5-15R (15A) receptacles Output Connection Type Front (2x) NEMA 5-15R (15A) receptacles Filtering EMI/RFI: 150KHz to 100MHz Weight 3.2 lbs Certifications UL 1449 Frequency 60 Hz Data Protection RJ-45 Temperature "32F (0C) to 104F (40C) Operating
5F (-15C) to 114F (45.6C)Non-operating"
Manufacturer Warranty 1 Year Limited