|
Find Similar Products in:
|
|
|
|
| Smarthome X10 Toggle Dimmer Switch - Ivory |
|
Item# X10WS467DI
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Fully X10 compatible to receive commands from any X10 controller
- Enhanced X10 sensitivity & noise resistance
- Adjustable dim level and fade on/off speed
- Easy to program - takes less than a minute
- Returns to either previous dim level or preset dim level
- When controlled locally, the switch transmits X10 signals to control other devices
- 3-way and greater lighting circuit capability
Essential Info
Replace any standard light switch in your home with the X10 Toggle Dimmer Switch for an affordable and easy way to add customized lighting to your home automation system. Use the paddle to turn the light on or off and brighten or dim the connected light to one of 32 brightness levels. An X10 address can be programmed in seconds, enabling the switch to send and receive X10 commands. Responds to on/off and bright/dim commands sent from any X10 controller. Or tap the toggle switch to remotely control X10 devices with the same X10 address. Beautiful, high-quality construction of the X10 Toggle Dimmer Switch offers the natural feel of high-end switches without the hefty price. Its sleek design responds to each touch with a crisp, tactile response, for the look and feel of a much more expensive switch. An amber LED indicates the current on/off status of the connected light and even doubles as a locator light when the light is off, making it easy to find the switch in the dark. The X10 Dimmer switch also stores a preset On-Level to customize your lighting to best fit your lifestyle needs. The On-Level is the brightness that the light will go to when you turn it on. Once it is programmed in, the light will automatically go to the set On-Level when the paddle is tapped. On-Levels allow you to create ambience and atmosphere. Set your dining lights to 50% to add a touch of romance to your meals. If you want the lights to turn on full bright, simply double-tap the toggle switch and bypass any On-Level to go to full brightness. X10 Toggle Dimmer Switch, also available in white, is designed to control incandescent loads, up to 600 Watts. Wallplates are sold separately. For fluorescent fixtures or non-dimmable appliances, try X10 Toggle Wall Switch.
Important notes:
- SLD/INSTEON product & customer service support available at the INSTEON Gold Line at 1-800-762-7845 Mon-Fri 9:00am-6:00pm ET
Manuals/Software
What's Included
X10 Toggle Dimmer Switch
2x - Mounting screws
4x - Wire nuts
Quick-Start Guide
|
More Info
|
Slim Design
Similar dimmers are up to 50 percent deeper than X10 Toggle Dimmer Switch. With its slim design, installation is easy, even in small junction boxes.
Easy to Install and Set Up
This switch wires in like a standard wall switch with an additional connection to a neutral wire. To set the X10 address, press & hold the Set button until it beeps and then send the X10 address from any X10-compatible transmitter.
Create Multi-Way Circuits
The X10 Toggle Dimmer Switch allows you to customize your lighting setup no matter how your house is wired. It's simple to create a 3-, 4-, or 5-way circuit. Simply replace all of the existing switches you want to include in the circuit. Then, program the same X10 address to each switch. No traveler wires or additional programming is needed.
NOTE: For each X10 Toggle Dimmer Switch that is placed directly adjacent to another, you must subtract 50 Watts of capacity from each dimmer. If three dimmers are adjacent to one another, then 100 Watts must be subtracted from the capacity of the center dimmer.
Non-Volatile Memory
All X10 Toggle Dimmer Switch settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, X10 Toggle Dimmer Switch will return to its last brightness level when power is restored.
90-Day Warranty
Smarthome warranties this product for 90 days.
Safety Tested and Factory Certification
 All Smarthome products are safety approved. The assembly line for Smarthome Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being thoroughly audited. The certification received was based on its dedication to high quality management systems and strict adherence of quality systems and guidelines.
NOTE: As with all wall dimmers, X10 Toggle Dimmer Switch may feel warm during operation. Rigorously tested and approved to UL-standards, the amount of heat generated falls well within approved limits and poses no threat to your home or the lifespan of the device.
|
Specifications
|
Specifications | | General | | Brand: | Smarthome | | Manufacturer Product No.: | X10WS467DI, Smarthome X10 Toggle Style Dimmer Switch | | Warranty | 90 Days | |
| Operation | | On-Levels | 32 | | LED Indicator | One Amber LED | |
|
| Multi-Way Circuit Support | One Dimmer Switch controls load, add any number of additional X10WS12A Dimmer Switches (only connect to LINE and NEUTRAL) and program with same X10 address | | Setup Memory | Non-volatile EEPROM | |
| Mechanical | | Paddle Type | Toggle | | Wire Nuts | 4 included | | Mounting | Mounts in single or multiple-ganged junction box. Control 50 W less load for each immediately adjacent electronic dimmer switch installed. For example, 300 W load control becomes 250 W with another Dimmer Switch to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating. | | Operating Conditions | Indoors, 32 to 104°F, up to 85% relative humidity | | Dimensions | 1.73"w x 4.14"h x 1.73"d (front bracket)
1.74"w x 2.71"h x 1.40"d (main body) | | Weight | 3.6 oz | | Electrical | l| Supply Voltage | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Power Wire Leads | 6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) | | Ground Lead | 6", 18 AWG, stranded, bare copper | | Load Types | Wired-in incandescent lighting devices | | Maximum Load | 300 Watts (uses 12-Amp triac dimmer) | | Power Consumption: | 1.38 Watts | | Certification | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Primary Address | 1 optional (comes unassigned) | | X10 Scene Addresses | N/A | | X10 Status Response | Supported | | X10 Resume Dim | Supported (by setting Local On-Level to zero) | | X10 Powerline Frequency | 120 KHz | | X10 Minimum Transmit Level | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level | 10 mVpp nominal | | X10 Messages Repeated | No |
|
Reviews
|
|
|
|
|
|
|
|