|
Find Similar Products in:
|
|
|
|
| Smarthome X10 Toggle Wall Switch - White |
|
Item# X10WS467
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Fully X10 compatible to receive commands from any X10 controller
- Enhanced X10 sensitivity & noise resistance
- Easy to program - takes less than a minute
- When controlled locally, the switch transmits X10 signals to control other devices
- 3-way and greater lighting circuit capability
Essential Info
This X10 Toggle Wall Switch can replace any standard wall switch in your home to add remote control of lights, fans, and other appliances to your existing X10 home automation system. The switch responds to on/off commands but can also transmit its own X10 address when operated locally. This is great for status or for simply controlling other devices that are sharing the same address elsewhere in the home. A white LED indicates the current on/off status of the connected light or appliance and even doubles as a locator light when the light is off, making it easy to find the switch in the dark. This X10 Toggle Wall Switch, also available in ivory, is designed to control a 480 Watt incandescent load or 15A resistive load. Wallplates are sold separately. For dimmable light control, try X10 Toggle Dimmer Switch.
Important notes:
- SLD/INSTEON product & customer service support available at the INSTEON Gold Line at 1-800-762-7845 Mon-Fri 9:00am-6:00pm ET
Manuals/Software
What's Included
X10 Toggle Wall Switch
2x - Mounting screws
4x - Wire nuts
Quick-Start Guide
|
More Info
|
Slim Design
Similar dimmers are up to 50 percent deeper than X10 Toggle Wall Switch. With its slim design, installation is easy, even in small junction boxes.
Easy to Install and Set Up
This switch wires in like a standard wall switch with an additional connection to a neutral wire. To set the X10 address, press & hold the Set button until it beeps and then send the X10 address from any X10-compatible transmitter.
Built with a Quieter Relay
Because X10 Toggle Wall Switch is built with a much quieter relay than most remote-control switches, it has a click that is 80 percent quieter than traditional relay switches. This allows you to control lights and other non-dimmable devices without waking up the baby, annoying other family members, or sending your cat fleeing across the room. The click of the internal relay is barely audible.
Generates Less Heat
Unlike other switches, X10 Wall Switch uses a relay to control the load. Other switches use components that absorb about two volts of power and dissipate the heat through the front of the switch. By using a relay, the switch runs cooler and full voltage gets to the load.
Create Multi-Way Circuits
The X10 Toggle Wall Switch allows you to customize your setup no matter how your house is wired. Create a brand new circuit or add to an existing one. Simply replace all of the existing switches you want to include in the circuit. If adding to an existing circuit, use the same X10 address assigned to the current switches. If you are creating a new circuit, choose one address and program it to each one of the switches. No traveler wires or additional programming is needed.
Non-Volatile Memory
All X10 Toggle Wall Switch settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, X10 Toggle Wall Switch will return to its last brightness level when power is restored.
90-Day Warranty
Smarthome warranties this product for 90 days.
Safety Tested and Factory Certification
 All Smarthome products are safety approved. The assembly line for Smarthome Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being thoroughly audited. The certification received was based on its dedication to high quality management systems and strict adherence of quality systems and guidelines.
|
Specifications
|
Specifications | | General | | Brand: | Smarthome | | Manufacturer Product No.: | X10WS467, Smarthome X10 Toggle Style Switch | | Warranty | 90 Days | |
| Operation | | LED Indicator | One Amber LED | |
|
| Multi-Way Circuit Support | One Dimmer Switch controls load, add any number of additional X10WS467 Switches (only connect to LINE and NEUTRAL) and program with same X10 address | | Setup Memory | Non-volatile EEPROM | |
| Mechanical | | Paddle Type | Toggle | | Wire Nuts | 4 included | | Mounting | Mounts in single or multiple-ganged junction box. | | Operating Conditions | Indoors, 32 to 104°F, up to 85% relative humidity | | Dimensions | 1.73"w x 4.14"h x 1.73"d (front bracket)
1.74"w x 2.71"h x 1.40"d (main body) | | Weight | 3.6 oz | | Electrical | l| Supply Voltage | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Power Wire Leads | 6", 14 AWG (black and red) and 18 AWG (for white), stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) | | Ground Lead | 6", 18 AWG, stranded, bare copper | | Load Types | Wired-in incandescent lighting and inductive loads | | Maximum Load | 15 Amps; 480 Watts (for incandescent loads) | | Power Consumption: | 0.67 Watts | | Certification | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Primary Address | 1 optional (comes unassigned) | | X10 Scene Addresses | N/A | | X10 Status Response | Supported | | X10 Resume Dim | Supported (by setting Local On-Level to zero) | | X10 Powerline Frequency | 120 KHz | | X10 Minimum Transmit Level | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level | 10 mVpp nominal | | X10 Messages Repeated | No |
|
Reviews
|
|
|
|
|
|
|
|