|
|
|
|
| Smarthome X10 Maxi Controller |
|
Item# X10SC503
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Install and set up in minutes
- Soft-touch buttons let you control devices and activate scenes with a single button tap
- Status LED and beeper indicate signal transmission
- Stores setup state in memory so settings aren't lost when power is disrupted
- Customizable labels lets you keep track of what devices are controlled by which button pair
Essential Info
Control multiple X10 devices from a single, easy-to-use tabletop controller. Each of X10 Maxi Controller's five button pairs can be assigned any X10 address, allowing for up to five different X10 scenes, whether programmed out of sequence or with different house codes. Set up your X10 Maxi Controller in mere minutes - simply plug the controller into any wall outlet and use a series of button taps to program in your house and unit codes. Once X10 addresses have been programmed, use the corresponding On and Off buttons to activate and deactivate the scene with one tap. Separate Bright and Dim buttons allows you to easily adjust brightness levels of the last scene controlled from the X10 Maxi Controller. All On and All Off buttons also let you control all the programmed X10 addresses with a single button tap.
Place the X10 Maxi Controller on a nightstand, telephone table, desk, or any other location where you'd like to control multiple devices or scenes. A hinged stand can be pulled out to prop the X10 Maxi Controller up for an alternate viewing angle. The X10 Maxi Controller allows you to control just about any electronic device in your house from your bed, couch, kitchen counter, and more. Turn on a lamp downstairs if you hear a noise in the middle of the night. Get air circulating by turning on a fan without getting up from the couch. Make sure your electric fountain is shut down as you settle into bed for the night. With all your X10 controls at your fingertips, home automation has never been more convenient.
Important notes:
- SLD/INSTEON product & customer service support available at the INSTEON Gold Line at 1-800-762-7845 Mon-Fri 9:00am-6:00pm ET
Manuals/Software
What's Included
X10 Maxi Controller
Quick-Start Guide
|
Specifications
|
Specifications | | Brand: | Smarthome | | Manufacturer Product No.: | X10SC503, X10 Maxi Tabletop Controller | | Warranty: | 90 Days | | Operation | | ON/OFF Button Pairs: | 5 Addresses | | ALL ON/ALL OFF Buttons: | Control all X10 devices linked to Channels 1-5 | | BRIGHT/DIM Buttons: | Control X10 devices linked to last pressed Channel | | Audio Alert: | Beeper, can be disabled | | Status LED: | White, can be disabled | | Setup Memory: | Non-volatile EEPROM | | Mechanical | | Mounting: | Included desk stand (flat or vertical) | | Button Type: | 14 Carbon puck onto etched PCB switches | | Button Appearance: | Roundish and rubbery | | Button Labels: | Printable using template | | Operating Conditions: | Indoors, 32 to 104°F, up to 85% relative humidity | | Dimensions: | 5.0" H x 6.4" W x 3.0" D | | Weight: | 1 lb 5 oz | | Electrical | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Power Cord: | 6 ft, 2-pin polarized plug | | Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Addresses: | Up to 5 of 256 possible | | X10 Status Response: | Supported | | X10 Powerline Frequency: | 120 KHz | | X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level: | 10 mVpp nominal | | X10 Messages Repeated: | No |
|
Reviews
|
|
|
|
|
|