Whether you're just getting started in home automation or you're ready to upgrade from X10 to INSTEON, the first dual-mesh network that combines power line signals with wireless radio frequency, selecting from a confusing array of products can be daunting. To help you better understand the benefits of INSTEON in comparison to legacy X10 products, these products have been placed side by side with a comprehensive list of detailed benefits. If you still have questions, you can always contact Smarthome's Customer Solution Center for help.

X10 distributes command signals over your existing power lines. INSTEON takes this a step further: This dual-mesh network combines wireless radio frequency (RF) with your home's existing electrical wiring for maximum reliability, and since it's compatible with your legacy X10 products, you won't need to replace all of your existing switches and modules until you're ready. INSTEON confirms every message to insure that messages are received error-free, automatically retransmitting corrupted messages to be sure that your commands are obeyed. In addition, every INSTEON device acts as a two-way repeater, so an INSTEON network actually becomes stronger and more reliable as more products are added.

Getting started:
For maximum reliability, the INSTEON network requires that you install a two Access Points or any two dual-band INSTEON products, devices that not only extend the range of signals but also eliminate the need for hardwired phase couplers, ensuring that commands sent from one electrical phase to another will be received and executed.

Couplers/Signal Repeaters

INSTEON	X10
Access Points Model 2443 Plug-in - no hardwiring required Sends INSTEON signals from one electrical phase to another Simultaneously transmits and receives INSTEON signals over powerlines and wirelessly Repeats INSTEON signals Bridges RF-only INSTEON devices with power line-only INSTEON devices	SignaLinc Model 4816b2 4826a Plug-in - no hardwiring involved 30-Amp pass-through outlet Passes signals to both electrical phases of a house Passive & Active versions 3- or 4-pin Configuration Active version repeats signals

Controllers

INSTEON	X10
ControLinc Model 2430 5 non-sequential programmable buttons Controls five devices or scenes Links to any INSTEON or X10 device in seconds No code wheels required - all button programming Program any 256 X10 address to any device	ControLinc Maxi Model 4071 10 non-sequential user-programmable soft-touch buttons Scene setup at the touch of one button Multi-house code programmable All Lights On/All Units Off buttons Easily access all 256 X10 addresses
SwitchLinc Dimmer Model 2476D 2476DH Choose 600-watt or 1000-watt version 400-scene capable True rocker action Programmable preset and fade levels Status LEDs 3-way ready Repeat all INSTEON signals Fast response, seemingly without pause Dimmers send confirmation signals automatically White LEDs - Color change kits available
SwitchLinc Relay Model 2476S 13-amp capacity 80% quieter than other switches True rocker action 3-way ready Set up any combination of up to 417 INSTEON links and 256 X10 addresses Responds in 0.05 seconds Confirmation signals sent automatically Repeats all INSTEON signals White LEDs - Color change kits available
KeypadLinc Dimmer Model 2486dWH6 6-button and 8-button keypads included Integrated 600-watt dimmer 400-scene capable Easy-to-label buttons Custom-etched buttons available 3-way ready Controls legacy X10 devices as well as INSTEON Responds in 0.05 seconds Confirmation signals sent automatically Repeats all INSTEON signals Programmable preset and fade levels Monitors linked devices White LEDs - Color change kits available
ToggleLinc Dimmer Model 2466DW/I Toggle control 400-scene capable Programmable preset and fade levels 3-way ready Repeat all INSTEON signals Fast response, seemingly without pause Dimmers send confirmation signals automatically
ToggleLinc Relay Model 2466SW/I Toggle control 13-amp capacity 80% quieter than other switches 3-way ready Set up any combination of up to 417 INSTEON links and 256 X10 addresses Responds in 0.05 seconds Confirmation signals sent automaticallyRepeats all INSTEON signal

Plug-in Modules

INSTEON	X10
LampLinc Model 2456D3 2457D2X (no Pass-through) 2457D2 (Dual-Band) 300-watt capacity 3-pin configuration 417 scenes capable Pass-through outlet Programmable preset and fade levels Repeats all INSTEON signals Responds in 0.05 seconds Installs and sets up in minutes Status LED	LampLinc Model 2000SC 300-watt capacity Resume Dim capability
ApplianceLinc Model 2456S3 2456S3E (Outdoor) 2-way - confirmation signals sent automatically 15-amp capacity 80% quieter than traditional relays 417 scenes capable Pass-through outlet Installs and sets up in minutes Repeats all INSTEON signals Responds in 0.05 seconds Status LED

In-Line Modules

INSTEON	X10
In-LineLinc Relay/Dimmer Model 2475s2 2475d 400-watt/10-amp capacity (2475s) 300-watt capacity (2475d) Remote dimming capabilities (2475d) 417 scenes capable Programmable preset and fade levels Repeats all INSTEON signals Responds in 0.05 seconds 2-way - confirmation signals sent automatically Installs and sets up in minutes	HomePro Fixture Relay Module Model 2250aw 20-amp capacity LED status indicator Scene compatible

Upgrades:
INSTEON products are flexible enough to match the décor of any home and reflect the changing tastes of any homeowner. Once you've installed your switches and keypads you can take advantage of numerous color-change kits and options to adjust the original products to your taste.

INSTEON SwitchLinc Accessories:
INSTEON SwitchLincs come with white paddles, but ivory, almond, light almond, black, brown and gray paddles are also available. Each set comes with two paddles to change the color of two SwitchLincs in your home. If you prefer, you can purchase your SwitchLinc with the color already changed: The SwitchLinc Dimmer is available in ivory, almond, light almond, black, brown, and gray.

Unlike with other switches and keypads, it's also possible to change the LED lights in INSTEON SwitchLincs. Each SwitchLinc Light Pipe Kit comes with two pairs of color pipes to change the color of the LED brightness bar as well as the status light at the bottom of the switch to red, green, amber, or blue. Since they install easily, you'll be able to change the color of the LEDs whenever you want. Four-packs are also available in single colors: Choose red or Frosted light pipes.

Elegant customized etching is now available. Choose the SwitchLinc pre-assembled with the Etched Paddle.

INSTEON KeypadLinc Accessories:
Change the appearance of any KeypadLinc with the KeypadLinc Multi-Color Kit, a set of diffuser lenses that easily install in the KeypadLinc to change the LEDs to red.

Pre-printed labels are included with every KeypadLinc, but for the ultimate in personalization, order Custom Keypad Buttons, laser-etched replacement buttons for the INSTEON KeypadLinc Dimmer. Each button is laser-etched with your detailed room description. Custom-etched buttons available for purchase in a set of 6 (2 large and 4 small) or set of 8 (8 small). You can also purchase etched buttons separately (small or large) or pre-assembled (6-button KeypadLinc or 8-button KeypadLinc).