Add $175.00 for FREE shipping
Learn More!
Control Type
Internet Controllable
Serial / RS-232 / RS-485 Controllable
Connector Type
RJ12 Connectors
RJ45 Connectors
RS485 Connectors
Compatibility
Contact Closure / Relay
IP / Network / Ethernet
Serial - RS-485
Features
Contact Closure Input / Output
Ethernet Compatible
Expandable Zone Capacity
Hardwired
Plug-In
Power Over Ethernet
Relay Output Support
Remote Web Programming
Web Access
Web Support
Wired
# of Relays
2 Relays
Control Method
Control Systems / Relay
Ease of Installation
Intermediate (Installs < 60 minutes)
Brand
eze System
Other Ways to Shop
In Stock
On Sale
Order the Smarthome Catalog

Start Monitoring, Logging and Controlling Sensors and Devices over the Internet
eze System 111-0010-2 ezeio Web-Based Input/Output I/O Controller, Standard
eze System 111-0010-2 ezeio Web-Based Input/Output I/O Controller, Standard
eze System 111-0010-2 ezeio Web-Based Input/Output I/O Controller, Standard
Item# 93502
Price: Normally $499.00 
Hot Deal $358.80
Qty:
Free shipping on orders over $175 - See Details

Overview

  • 4 analog general purpose inputs
  • 2 general purpose relay outputs
  • ModBus-RTU compatible serial port
  • MicroLAN (1-wire) master
  • Standard Ethernet 10/100 port

Essential Info

The eze System 111-0010-2 ezeio Web-Based Input/Output I/O Controller, Standard is flexible, low cost, easy to install, configure and use. It can be used to monitor/record for example energy use, temperature, pressure, flow, gases, activity, speed, vibration and anything else that there is a sensor for.The eze System ezeio Controller comes ready to use out of the box. Simply attach the power supply to the controller and Internet connect it to the Internet using the Ethernet cable, and it will start communicating with the eze System servers. There is no need for special software or network setup. The ezeio connection is encrypted, bidirectional and very efficient. The ezeio comes complete with a power supply, an Ethernet cable and 4 months of basic service. Additional service is easily purchased via the web interface.

The ezeio Controller is a general purpose Input/Output device, capable of monitoring, logging and controlling a wide range of devices and equipment through industry standard connections over the Internet. The ezeio Controller automatically establishes a secure link to an array of redundant and secure servers, allowing live access from a standard web browser and eliminating the need for fixed IP, complex firewall setup or special software. Multiple ezeio Controllers can be set up under a single user account, thus providing a simple overview of the status of any number of sites spread out geographically from anywhere in the world. All configuration, control, and access is accomplished by logging into the secure servers via the Internet.

The ezeio includes four (4) analog inputs, two (2) relay outputs, Microloan and Mudbugs connectivity. The ezeio can be expanded to a maximum of 40 inputs and 40 outputs, which can be a mix of analog, digital, pulse, Mudbugs and Microloan inputs/outputs.

Additional Features
• Runs on 8-25VDC, <1W typical draw
• Logging interval configurable from 10 seconds up to 4 hours for each input
• Up to four alarm thresholds for every input
• Alarms can send email, control outputs, set modes and more
• Live access from standard web interface
• No special firewall or network configuration
• HTTP XML API available for easy integration with other systems
• Zero on-site configuration required

Manuals/Software

What's Included

  • 1x - Controller
  • 1x - Power Supply
  • 1x - Ethernet Cable
  • 1x - Owner's Manual
  • More Info

    Associations
    • Each controller must be associated with a single account.
    • Each user is associated with a single account.
    • An account may have any number of controllers and any number of users associated with it.



    Specifications

    General Specifications
    Manufacturereze System
    Manufacturer Product No.111-0010-2
    UPC610563073993
    Controller Specifications
    Size153mm x 100mm x 38mm (6.0" x 3.9" x 1.5") mounting ears extend 15mm (0.6") on each side. Hole centers are 166mm (6.5") apart. Allow at least 40mm (1.6") margin for connectors
    WeightApprox. 220g (0.5lb)
    Power8-25VDC, <1W average, 7W peak
    Operating Environment0-50° C (32-120° F)
    Hardwire Inputs4 inputs on screw terminal:
  • 0-10V, 10mV resolution, >10kÙ impedance
  • 0-30mA, 32uA resolution, 100Ù current sense resistor
  • Hardwire Outputs2 relay outputs with screw connections:
  • Form C (1 pole switching)
  • Max 2A, 50V load
  • Other Connections
  • Ethernet, TP 10/100, RJ45
  • MicroLAN, RJ12
  • Serial RS485, RJ45-jack
  • GSM antenna SMA (optional)
  • Expandability
  • Up to 40 sensor inputs total
  • Up to 40 outputs total
  • MicroLan
  • Max 20 MicroLAN devices supported
  • Active pullup on data wire
  • 5V and raw DC provided
  • RJ12 jack compliant to Dallas connector standard
  • Max 50m (150ft) network length
  • DC Output
  • Unregulated output, max 200mA ('+' terminals)
  • Regulated 5V output, max 100mA ('5' terminal)
  • Serial
  • Rev <6: RS232 Rx, Tx, RTS signals
  • Rev >=6: RS485/Modbus RTU, bidirectional 19200bps
  • Configuration and Programming
    LoggingIndividual logging on each input. 5s to 4h interval. Automatically communicated and stored on redundant servers.
    Input TriggersUp to four alarms per input, each with alarm/restore thresholds and separate hold off times. Each alarm and restore can trip up to four separate actions, such as sending messages, controlling outputs or counters.
    SchedulesUp to 20 schedules, each with four intervals and flags for each day in the week. Up to four actions for each schedule on entry/exit of an interval.
    TimersUp to 20 timers, each can be set to repeat hourly, daily, weekly or monthly. Each timer can trip up to four actions.
    Scripts (Optional)Up to 64kB compiled script code, with 6kB of RAM. Extensive function library with support for floating point math, string manipulation and communication functions.
    Server Communication
    ConfigurationAutomatic, DHCP
    Host ProtocolIP/UDP, proprietary encrypted payload
    Port
  • Outbound port UDP 8844
  • Inbound port UDP 28672-32767 (random per session)
  • Encryption128 bits, unique key per controller
    TrafficTypical less than 5MB / month (depends on usage)


    Important notes:
    Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
    Manufacturer contact information: eze System, Inc., Tel: (888) 393-9330 Ext 110

    Reviews

    Accessories

    eze System 240-0017-0 30A, 5V DC Current Transducer  eze System 240-0014-0 MicroLan Digital Temperature Probe     
    eze System 240-0017-0 30A, 5V DC Current Transducer  eze System 240-0014-0 MicroLan Digital Temperature Probe     

    Related Items

    Sign-up for Exclusive Email offers 
    ORDERING INFO
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    MORE INFO
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    OUR COMPANY
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    STAY INFORMED
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark