|
|
| Extech Instruments VT30 LCD Digital Multifunction Voltage Tester |
|
Item# 90263
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Large backlit LCD display
- AC/DC voltage indication: 6V, 12V, 24V, 50V, 230V, 400V, 690V
- Polarity detection with LEDs for positive and negative DC
- Continuity Test with audible tone
- Phase rotation test for motors
- Two handed operation for low impedance testing
- Built-in flashlight for testing in tight areas
- Voltage function operates without battery
- Rubberized double-molded IP64 housing
Essential Info
The VT30 measures AC voltage to 480V and DC Voltage to 690V with LCD readout, stepped voltage bargraph indicator, and LEDs for positive and negative polarity. Additional features include audible continuity beeper, low impedance test for eliminating phantom voltages, and a built-in flashlight to illuminate test connections during measurements. This meter is shipped fully tested and with proper use will provide years of reliable service.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
Manuals/Software
|
Specifications
|
LCD Display: 1999 counts (3-1/2 digits) with bargraph and backlight
Resolution: 1 Volt
AC Voltage Range: 0 to 480V
AC Frequency Range: 50/60Hz
DC Voltage Range: 0 to 690V
Range Selection: Automatic
Response Time Updates: 2-3 times/sec
Overvoltage Protection: 480VAC/690VDC
Low Impedance Test: 12-250VAC/DC
LCD Enable Input Voltage: >4.5V AC/DC
Operation Time: 5s<250V AC/DC
Power Supply: 2 x AAA 1.5V alkaline batteries
Battery Life Approx: 8 hours continuous use typical
Operating Temperature: -10 to 55C (14 to 131F)
Storage Temperature: -30 to 60C (-22 to 140F)
Operating Humidity: 10 to 85% RH (non-condensing)
Safety This meter is intended for origin of installation use and protected, against the users, by double insulation per EN61243-3 and IEC61243-3 to Category IV 600V and Category III 1000V; Pollution Degree 2.
Approvals: CE, IP64
Dimensions: 240 x 78 x 40mm (9.4 x 3 x 1.6in)
Weight: 260G (9.2oz)
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|
|