Leviton's Vizia RF + components are designed to communicate with each other via Radio Frequency (RF) to provide remote control of your lighting. Using RF technology allows Leviton to provide the greatest signal integrity possible. Each module in Leviton's Vizia RF + component line is a Z-Wave enabled device. In a Z-Wave network, each device is designed to act as a router. These routers will re-transmit the RF signal from one device to another until the intended device is reached. This ensures that the signal is received by its intended device by routing the signal around obstacles and radio dead spots.
The Vizia RF + 4-Button Scene Controller with Switch and IR Remote Capability is ideal for remote control of up to four different scenes of Vizia RF + scene-capable devices well as ON/OFF function of a single pole application. The top four buttons on the controller provide ON/OFF switching of four scenes while one button provides ON/OFF function of a single pole application. The bottom button transmits DIM/BRIGHT commands to the most recently switched-ON scene. An optional IR Handheld Remote Controller (VRMR1-0SG) can be used to activate the Vizia RF + 4-Button Scene Controller’s ON/OFF/DIM/BRIGHT commands.
• Perfect for retrofits, replace an existing switch with controller for enhanced scene control
• Provides remote ON/OFF/DIM/BRIGHT control of four customizable scenes using Leviton Vizia RF + and other
manufacturers' compatible devices
• Key cap with IR window included to expose internal IR receiver for this device
• Separate IR Remote (VRMR1
) available to control ON/OFF/DIM/BRIGHT for the four programmed scenes
This switch can handle the following loads:Incandescent-1800W
Magnetic Low-Voltage-1800VA (1440W)