• Provides 4 output channels (dry contact or 8-30V)
• Responds to up to 80 different transmitters
• Outputs can be programmed as momentary or maintained contacts
• 50-150ft range

This 4-channel receiver will allow you to control and bridge communications between your hard-wired and wireless Leviton devices. You'll be able to control up to four separate devices or scenes and can even program all your lights to respond to a single master switch to save energy. The LevNet Low Voltage Relay Receiver is compatible with single and dual rocker self-powered wireless light switches, dual rocker handheld remote and key card access switches.

To program, the receiver must be receiving power and after programming the setting will be retained even when power is disconnected. While programming the sensitivity of the receiver will be reduced while in Learn Mode to prevent associating with unwanted transmitters. Transmitters should be within 15ft of the receiver when programming and the LevNet Relay Receiver can be paired with as many as 80 transmitters.

• Installation Guide

Leviton LevNet Low Voltage Relay Receiver, 8-Channel	Leviton LevNet RF Wall Switch Receiver without Neutral

Leviton WSS0S-P0I LevNet RF Wireless Self-Powered Remote Switch, Ivory	Leviton WSCPC-W LevNet RF Self-Powered Wireless Light Sensor